Uk 18

[traveller]

Thanks Tik from Allsats.

This is for TM-9100 and TM-9100Super. There is no need to rename the file.

We recommend to install the image into the flash, not into MMC as the new UR 18 drivers may conflict with old versions.

We also recommend to use the latest Technomate Control Center 7.1. With this Loader, you will not need the extra files (found in the older versions), you just download the 1 file, so it is much easier to install.

[echelon]

For super version

Unpack to newly formatted mmc/sd card,

1. Turn off the TM9100 at the back
2. Turn on the tm9100 from the back while holding the up ^ button on the front panel.
3. Carry out a factory restset
4. Turn off the TM9100 at the back
5. Inset the MMC/SD card
6. Turn on the tm9100 from the back

The TM9100 should now start the upload, leave it alone until you see done on the front panel, remove the MMC/SD card and restart.