DM 800 Problem only soond on HD channels

[HHHH4]

Hi i had problems sinc day 1 and is not older then 5 days it took me forever to get it to work as i was geting tune faild and had to unplogit for it to work aging

i did find lnb config some setings so now it is ok but when i go to hd cannels allwys i get only soon and have to change and go bac to get the pic i did put the new driver but the same any fix for this thanks

[Eugene1888]

Which channels, which settings and which image are you using?
It might be an idea to use a channel editor and delete the channels in question, then do a manual scan > single satellite and try the new found channels. This would sort out any bad SID's & PID's in the settings you are using.

There's also loads of images, but I find most are about the same level, none yet seemingly open 16E HD,
If you haven't already get a USB HDD or a USB memory card reader and a micro SD and cram it in the back of your dm800 then install Barry Allen.
Then... using FTP upload one image at a time to media/usb, any more than one and Barry Allen won't find it on reboot.
Anyway after ftP'ing the image restart and Barry Allen will install the new image, you then choose which image you want at start up.

bear in mind you will need to install a CAM on each image, but your channels will stay in place, though Enigma seems to F**k up on a couple of satellites...