Nabilo BH 0.8 Chat [Archive]

sonic1

19-02-2009, 10:45 PM

Pure flash is just for flash if you wish to use multiboot images on your USB or HDD if you have one,
If not just put BH 0.8 in the flash and it will perform just fine ( as long as you don't have a clone ) :respect-048:

sammmy

19-02-2009, 10:55 PM

thank you very much .is taking long to connect to n 08 site.is this because the site is down or something wrong

jake77

19-02-2009, 10:58 PM

looks like download site for cams etc is down no connection here

jake

19-02-2009, 11:06 PM

looks like download site for cams etc is down no connection here

jake

yes NAB forum is down

sonic1

19-02-2009, 11:14 PM

Yes the forum is down, if you have HM 0.7 on BA then copy your emu and then ftp back to BH 0.8:respect-048:

Always best to have a back up plan.

harshy

20-02-2009, 12:17 AM

looks nice it has to be said :) , but I'll wait till nabilo is up again :)

fced

20-02-2009, 12:19 AM

Sonic, Pureflash from 29 december, was one of the only images working on my buggy DM800 clone ... You only need to reflash with seconstage 0.69 after flashing with pûreflash...

No need to use Dreamup
Just flash from webif, a first time with pureflash, and then when the flash is end, refresh the webif flash page, and flash again (without rebooting or you will get ERROR NO CA) with second stage 0.69...

20-02-2009, 06:55 AM

i have 0.6 in flash and 0.7 on BA would it be bes tto go for pure on flash or just put 0.8 on flash?

DeepDiver

20-02-2009, 08:05 AM

i have 0.6 in flash and 0.7 on BA would it be bes tto go for pure on flash or just put 0.8 on flash?

If you want to install 0.8 to multiboot,you MUST install the Pure Flash dated 19Feb09 to flash. This is necessary to ensure you have the latest DVB Drivers installed in flash.
Else, you just install 08 to flash.

sonic1

20-02-2009, 09:39 AM

looks nice it has to be said :) , but I'll wait till nabilo is up again :)

Site is back up again folks :respect-048:

dman

20-02-2009, 02:52 PM

Have installed pure Flash V 0.8 in Flash memory and 0.8 in multiboot very nice including the blue x 2 info screen which is really nice, kinda miss my Rihanna blue skin am sure its on the way, very impressed with the new look overall :respect-023:

kewell79

20-02-2009, 06:20 PM

is it possible to remove analog clock?

harshy

20-02-2009, 09:36 PM

the backup restore plugin is not there, how can I restore my settings?:07:

doct140

20-02-2009, 09:47 PM

does it have pip , and how to activate it , cheers

harshy

21-02-2009, 12:05 AM

the backup restore plugin is not there, how can I restore my settings?:07:

make sure to backup with dreamedit, before procedding with this image, also make a backup on to your hard disc, so you copy and paste your timer and settings for your satellites etc.

So far so good :):respect-applause-00

DeepDiver

21-02-2009, 08:03 AM

the backup restore plugin is not there, how can I restore my settings?:07:

BH 08 requires plugins updated to the latest CVS. These plugins are being uploaded now. It is only a matter of time.
You can now download the backup/restore plugin from the addons panel.

DeepDiver

21-02-2009, 08:05 AM

does it have pip , and how to activate it , cheers

The DM800 runs on a single tuner. The PiP would allow only channels on the same TP.
The PiP feature gives its best on DM8000 or DM7025.

stevengw

21-02-2009, 05:12 PM

this image is up the left..
for love nor money I cannot get it to drive my motor correctly, it either goes off on a wander in the other direction or freezes half way to the sat..
I changed back to 0.7 and have no problems???

Best to stay with 0.7 for now..

Ill post log files for those that don't beleive me, when simple is choosen then when you triy to enter sat motor setup the db800 crashes with the green screen of death everytime, on 4 boxes i know of so far all genuine..

harshy

21-02-2009, 07:57 PM

BH 08 requires plugins updated to the latest CVS. These plugins are being uploaded now. It is only a matter of time.
You can now download the backup/restore plugin from the addons panel.

Thank you DeepDiver and Sonic1 for helping me yesterday :)

satattack

21-02-2009, 09:24 PM

DeepDiver nabilo board down again? br:sat

sonic1

21-02-2009, 09:35 PM

Yes bud the board is down.
Be patient and it will be back:respect-048:

Terminator

21-02-2009, 10:33 PM

Hi Sonic.

Where will I find the emu folder on 07 to ftp back to 08?

Regards

sonic1

21-02-2009, 10:40 PM

Emu file in usr/bin
Script in usr/camscript
for CCcam cfg in etc

Thats all that is needed for CCcam
Newcs.xml is in etc/tuxbox/config

hm2075

22-02-2009, 12:11 AM

For people with clones, this may help

Barry Allen as u already know has a bootloader checker, if you do not have the latest bootloader it does not work,

so download yourself the latest BA, and also 7.zip

extract the ipkg and look in \control.tar.gz\control.tar\.\

go into open preinst and you will see this

if grep -qs BCM /proc/cpuinfo ; then
if grep -qs 7401 /proc/cpuinfo ; then
BOXTYPE=dm800
SECONDSTAGEVERSION=70
else
BOXTYPE=dm8000
SECONDSTAGEVERSION=71

this part is what probably needs editing, there maybe other stuff

I haven't got my serial connection with me so at the moment can't risk a flash, it may mean clones can use 0.8, worth a try ;)

loveman

22-02-2009, 01:20 AM

One thing I've never noticed in the nabilo images, is an option to set a cron job running. Is there a gui way of doing this? If not, how would I do it otherwise?

Cheers :)

harshy

22-02-2009, 11:41 AM

is there a way to update satellites.xml with Nabilo images, useful when new frequencies are in use.

OK, thanks again,

harshy

DeepDiver

22-02-2009, 12:16 PM

One thing I've never noticed in the nabilo images, is an option to set a cron job running. Is there a gui way of doing this? If not, how would I do it otherwise?

Cheers :)

Download and install the cron manager plugin v 0.2.2 r1 by gutemine.
I suggest you install it from telnet, using ipkg install filename.ipk

DeepDiver

22-02-2009, 12:17 PM

is there a way to update satellites.xml with Nabilo images, useful when new frequencies are in use.

OK, thanks again,

harshy

There is a web site where you can generate you customized satellites..xml file and upload it to your DM.
I am not sure I can post the link here.

sonic1

22-02-2009, 12:44 PM

There is a web site where you can generate you customized satellites..xml file and upload it to your DM.
I am not sure I can post the link here.
Post it and code the link :respect-048:

satattack

22-02-2009, 01:03 PM

how to put coded link?

DeepDiver

22-02-2009, 01:29 PM

is there a way to update satellites.xml with Nabilo images, useful when new frequencies are in use.

OK, thanks again,

harshy

Satellite.xml generator, very very simple and useful

_http://satellites-xml.eu/

sonic1

22-02-2009, 01:31 PM

http://img27.imageshack.us/img27/6619/codelink5798906.jpg

Highlight the text and then click the code icon,

satattack

22-02-2009, 01:34 PM

thx good to now. wery good to generate sat.xml file link postet by DD i use to use it br:sat

angusc

23-02-2009, 08:54 AM

What does it do when you code the link?

DeepDiver

23-02-2009, 09:45 AM

What does it do when you code the link?

A coded link will not be live, in other words, you will not be able to click on it. If you want to follow the link, you have to copy the URL and paste it to your browser.

24-02-2009, 07:16 PM

i am gettng the odd lock up on 0.8 and it lasts about 2 minutes before it starts to work again, anyone else had this?

sonic1

24-02-2009, 07:29 PM

i am gettng the odd lock up on 0.8 and it lasts about 2 minutes before it starts to work again, anyone else had this?

Can you give some more info po ?
Is it when just watching a channel, FTA,HD or maybe when using a plugin ?
The more info you can give the better m8;)

24-02-2009, 09:42 PM

watching HD channels on 28 east, its ok for ages then just locks, i poen cccam info to see if the servers are online but it does not work, ie pressing 3 does nothing.

sonic1

24-02-2009, 10:00 PM

So it sounds line CCcam stops running, is that the case ?
Maybe you can send me a debug ?
I assume that it is also not from your local card ?

24-02-2009, 10:43 PM

where is the debugg?

Dice Man

25-02-2009, 02:20 AM

DeepDiver

25-02-2009, 09:18 AM

When i download/install the software update plugin and after i get "execution finished" i keep getting this message:

"some plugins are not available:system plugins/software update (no module named image ******) ???

The software update isn't added to the green panel either.

Install this one. You will find it in the extensions menu, long press blue button.
You must enable the expert mode in the customize menu.

scrupples

25-02-2009, 10:47 AM

Install this one. You will find it in the extensions menu, long press blue button.
You must enable the expert mode in the customize menu.

Hi mate does this then give the menu option software manager? if so choosing this just brings up an empty box.....

DeepDiver

25-02-2009, 11:24 AM

Hi mate does this then give the menu option software manager? if so choosing this just brings up an empty box.....

Did you enable the expert option in the Customize menu ?

scrupples

25-02-2009, 11:35 AM

Did you enable the expert option in the Customize menu ?

menu
setup
system
customize
setup mode expert

this what you mean? if so yes......

DeepDiver

25-02-2009, 12:19 PM

menu
setup
system
customize
setup mode expert

this what you mean? if so yes......

Ok, then wait for next version of Black Hole :biggrinjester: