Sound on ITV HD

[keith0509]

I have a perfect picture on the above but no sound.
Anyone any ideas.
Using BH7 with latest C_jton settings.

[keith0509]

Do I need to enter the audio pids?
if so where about are they?
Cheers Keith.

[dribbled]

I've had a similar problem with the Humax box going through an HDMI switcher - I have to reset the switcher and that clears it.

Dribbled

[canthackit]

no mate make sure that your 2nd line reads thus.

p:BskyB c;000d49, c:030d49, c:040d4a, c:050001 ,f:5

i think you'll find your missing the "a" on the 3rd string.

regards: canthackit

[keith0509]

no mate make sure that your 2nd line reads thus.

p:BskyB c;000d49, c:030d49, c:040d4a, c:050001 ,f:5

i think you'll find your missing the "a" on the 3rd string.

regards: canthackit

Yes I am m8 but I have an "a" after the second string
Shall I remove this or leave it and have an "a" after the second and third strings ?

Cheers Keith.

[canthackit]

entry is like this.

p:BskyB, c:000d49, c:030d49, c:040d4a, c:050001, f:5

[holmroad]

Well I found the audio coming & going during the footie Tues night ANYWAY!:respect-046:

[canthackit]

yes there was i think it was a transmission problem though.

regards: canthackit

[keith0509]

entry is like this.

p:BskyB, c:000d49, c:030d49, c:040d4a, c:050001, f:5

I am using DCC to edit the said line but when I save it it is OK but after a reboot it has changed back to the original entry.
Any ideas?

[canthackit]

no no mate!!! after you've transfered the files "pull the power" on the DB then reconnect, it wont save the config if you just restart.

regards: canthackit

[keith0509]

Thanks guys I have now sorted it, I did it with DB Edit by changing the audio pid from 3402 to blank and put 3402 in the AC3 box, then sent the changes to the 800 and all is OK now.
Once again thanks for your help.
Take Care Keith.