Infinity USB + dm800 possible??

[Stev0]

is it possible to connect a Infinity USB to a dm800? anyone tell me how if it is possible.

[hm2075]

can this be used too?
_http://www.infinityusb.com/default.asp?show=productsdetail&ProductID=11

for the extra 15 quid, this can do a few more things that can be useful

[Stev0]

i have the infinty usb unlimited.

[Stev0]

"Infinity USB Smart" works with the same drivers as Smargo SmartReader+

Check out https://www.goldwafers.co.uk/product.php?productid=209&cat=0&page=1

and

https://www.satpimps.co.uk/showthread.php?t=103602

ok i got the Usb SMart this morning. did all the instructions and it still coming up with

card reader /dev/sci0
no or unknown card inserted

card reader /dev/usb/tts/0
no or unknown card inserted

card reader /dev/usb/tts/1
no or unknown card inserted

i have a sly uk card.

any idea's??

[sonic1]

Are you using Nabilo Image Steve0 ?

[Stev0]

yeah 0.9

[sonic1]

Ok, follow THIS (https://www.satpimps.co.uk/showpost.php?p=580012&postcount=11) post
and when you are done you must do a HARD reboot of the box, it will not work if you just restart enigma.

[Stev0]

still the same. installed the drivers etc, hard reset. nothing inserted. would it say no card inserted is the card it burnt?

[sonic1]

Just to make sure you have everything correct copy and paste you boot file and CCcam.cfg ( remove private data from CCcam.cfg if you have any.

[Stev0]

SERVER LISTEN PORT : 12000
# ALLOW TELNET INFO : #
#ALLOW TELNETINFO: yes
# ALLOW WEB INFO : #
#ALLOW WEBINFO: yes
# WEBINFO USERNAME : #
#WEBINFO USERNAME :
# WEBINFO PASSWORD : #
#WEBINFO PASSWORD :
# TELNETINFO USERNAME : #
#TELNETINFO USERNAME :
# TELNETINFO PASSWORD : #
#TELNETINFO PASSWORD :
# TELNET INFO LISTEN PORT : #
#TELNETINFO LISTEN PORT : 16000
# WEB INFO LISTEN PORT : #
#WEBINFO LISTEN PORT : 16001
# ZAP OSD TIME : #
#ZAP OSD TIME :0
# OSD USERNAME : #
#OSD USERNAME :
# OSD PASSWORD : #
#OSD PASSWORD :
# OSD PORT : #
#OSD PORT :80
# SERIAL READER : #
# SMARTCARD WRITE DELAY : #
# EMM Blocker #
# SHOW TIMING : #
SHOW TIMING : no
# DEBUG : #
#DEBUG : no
# NEWCAMD CONF : #
#NEWCAMD CONF :no
# DISABLE EMM : #
#DISABLE EMM : no
# EXTRA EMM LEVEL : #
#EXTRA EMM LEVEL : yes
# Mini OSD #
#MINI OSD : no
# CAM KEY #
# CAMDATA #
# BOX KEY #
# BEEF ID : #
# PIN : #
# SOFTKEY FILE : #
SOFTKEY FILE : /usr/keys/SoftCam.Key
# AUTOROLL FILE : #
AUTOROLL FILE : /usr/keys/AutoRoll.Key
# STATIC CW FILE : #
STATIC CW FILE : /usr/keys/constant.cw
# CAID PRIO FILE : #
CAID PRIO FILE : /etc/CCcam.prio
# #
#LOG WARNINGS : yes
# #
# PROVIDERINFO FILE : #
PROVIDERINFO FILE : /etc/CCcam.providers
# CHANNELINFO FILE : #
CHANNELINFO FILE : /etc/CCcam.channelinfo
# #
# LOADBALANCE : #
# TRY ALL CHIDS : #
# POSTINIT : #
# DVB API : #
# #
# SHOW EXTENEDED CLIENT INFO : #
#EMM THREADS : 1
# MINIMUM DOWNHOPS : #
#MINIMUM DOWNHOPS: 0
# #
SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 6800000



bootup:

echo 10 > /proc/progress
[ -e /dev/dbox/oled0 ] && ln -s /dev/dbox/oled0 /dev/dbox/lcd0

mount -t sysfs sysfs /sys
echo 12 > /proc/progress

depmod -Ae
echo 13 > /proc/progress

for mod in cifs usb-storage sd_mod autofs4 vfat; do
modprobe $mod
done

mount -at nonfs,nosmbfs,noncpfs,nocifs
echo 14 > /proc/progress

swapon -a
echo 15 > /proc/progress

tar xzf /etc/var.tar.gz -C /
echo 16 > /proc/progress

# sleep after 10min
hdparm -S 120 /dev/discs/disc0/disc

echo 17 > /proc/progress

# set UDMA66, enable dma
hdparm -d 1 /dev/discs/disc0/disc
hdparm -X66 /dev/discs/disc0/disc

# accustic management
hdparm -M 128 /dev/discs/disc0/disc

echo 18 > /proc/progress
for mod in dreambox_keyboard fp bcm7401; do
modprobe $mod
done

echo 19 > /proc/progress

cat /etc/videomode > /proc/stb/video/videomode

echo 20 > /proc/progress

for mod in rt73 zd1211b; do
modprobe $mod
done

echo 21 > /proc/progress

[ -e /etc/dropbear/dropbear_rsa_host_key ] && /usr/bin/showiframe /boot/bootlogo.mvi || /usr/bin/showiframe /boot/bootlogo_wait.mvi

hostname -F /etc/hostname

#Nabilo
echo 22 > /proc/progress
modprobe tun

echo 23 > /proc/progress

[ -e "/etc/sysctl.conf" ] && /sbin/sysctl -p "/etc/sysctl.conf"

echo 24 > /proc/progress

ldconfig

echo 25 > /proc/progress

ipkg-cl configure


#Nabilo
echo 26 > /proc/progress
[ -e "/usr/bin/openvpn_script.sh" ] && /usr/bin/openvpn_script.sh start

#Nabilo
echo 27 > /proc/progress
[ -e "/usr/bin/nfs_server_script.sh" ] && /usr/bin/nfs_server_script.sh start

#Nabilo
echo 28 > /proc/progress
[ -e "/usr/bin/inadyn_script.sh" ] && /usr/bin/inadyn_script.sh start

#Nabilo
echo 39 > /proc/progress
mount /dev/scsi/host0/bus0/target0/lun0/part1 /media/usb || mount /dev/scsi/host0/bus0/target0/lun0/disc /media/usb

#Nabilo
echo 30 > /proc/progress
[ -e "/usr/bin/.Nabiloautoswap" ] && /usr/bin/.Nabiloautoswap

#Smargo
echo 90 > /proc/progress
modprobe ftdi_sio

[sonic1]

I have to agree that it all looks ok, I have a smargo working with the same configuration.
Have you got the reader pluged into the top USB slot ?
Other than that maybe some one who has it working with the 800 could give some advise?

[Stev0]

yeah. it is. it has a module or normal switch on the bottem. wat shud that be set too??

[x5]

all looks good cant see nothing wrong with the cgfs
tray to add this line to your cccam.cfg

SERIAL READER : /dev/usb/tts/1 smartreader+

take out any other usb device u have connected to your box and do a hard reset

[sonic1]

yeah. it is. it has a module or normal switch on the bottem. wat shud that be set too??

Not sure but what ever changes you make always do a hard reboot.

[Stev0]

done both things, nothing worked. =/.

[Stev0]

i have done all that. still no detecting a card. do i need to increase the clock speed for sly uk??

[Stev0]

same result. nothing showing. would it show up if a burnt card as im unsure if its burnt now. because of the stuff i tryed to get it working. using a newcs. brought a infinity smart and still no result. :(

Also is there any command i can type in telnet to find out if its detecting it????

[Stev0]

its working now. sky card needs reactivating. thanks alot for your help.

but for some reason tho it doesnt find the sky card. a old art card works fine. but sky doesnt(nabbed it off a friend for a few hours)

[Stev0]

tryed with clock freq then without. tryed 6.00mhz no card found even a old art card. tryed 3.58mhz worked with olkd art but not my sly card =/

[Stev0]

still not showing up :(.

[shootingstar]

Hi

just wondering if anybody has this reader working with just CCcam as i can only seem to get it working with newcs & cccam . even then it will not read
my art sports card

thanks mark

[Stev0]

i got it working with my art card with just cccam. its nds which doesnt work.

[shootingstar]

thanks for the reply m8
can you tell me the smartcard clock frequency which you had your art card
running at so i can i can give it a go .

thanks

[Stev0]

SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6860002

[rigsby]

Has anyone got this working now as i have been following this thread
for days now & i can't get the Smartmouse to be recognised by DM800 ?

If anyone can share their settings it would be a great help.

cheers

[Stev0]

i have it working just wont read a sly or access card. works fine with art cards

[rigsby]

Hi Steve.

Yes i saw in a previous post you got an ART card working.

I have a 1 package S*y Nds card & a JSC Sports card.

Couldn't get it to read either of them.

Think we need to wait for an update to either the DM800 or the Smartmouse to get this to work properley.

cheers

[rigsby]

Hi Kinkdink

Yes, done all that.

Will have another try tonight.

Must have rebooted my dreambox 100+ times now, with no joy so far.
Beraing in mind it takes appx 10mins to reboot each time.

cheers

[Stev0]

i have tryed Smart VCP 3.58mhz, smart vcp 6.00mhz. rebooted everytime.

these are the settings have in my cccam.cfg:

SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6000000
SERIAL READER : /dev/usb/tts/1 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1 6000000
SERIAL READER : /dev/ttyusb0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyusb0 6000000
SERIAL READER : /dev/ttyusb1 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyusb1 6000000

tryed all different clock speeds each time. got sick of rebooting. so I gave up. seems like a waste of money. it makes a nice door stop tho.