USB Stick Error

[Armsoft]

Just got my DM800 yesterday and am having problems getting Fl***W****d to recognise my USB Stick?
I`m using the mikomi stick I had in my 7020s with no luck, and have just brought a new mikomi 2gb stick but still no luck.

Is there a setting in the 800 that makes the stick visable? or are the mikomi sticks not compatible (it worked fine in my 7020s)

Any help would be appreciated.

Thanks

[Armsoft]

I should also add that my DM800 came with Blackhole already installed in Flash (by the previous owner), so should I forget about USB Stick with the 800 and just flas** everything to the box? or do I still need USB Sticks?

Thanks

[keith0509]

You cant use Fla* ****** with DB800 m8.
You need to use Barry Allen.
Have a read in the BA section it is quite straight forward once you get used to it.

Good Luck Keith.

[Armsoft]

You cant use Fla* ****** with DB800 m8.
You need to use Barry Allen.
Have a read in the BA section it is quite straight forward once you get used to it.

Good Luck Keith.

Thanks Keith

So if I install Nabilosat DM800 Pure Flash to my box, do I use Barry Allen to install the images to the USB Stick from the DM800 or still from my PC?

Thanks so far

[sonic1]

Install pure flash and Barry Allen will install it's self as long as you have your USB plugged in.

[Armsoft]

Install pure flash and Barry Allen will install it's self as long as you have your USB plugged in.

Thanks sonic

I`ll just finish watching Utd v Spurs on SlyHD (what a fantastic quality picture) and then I`ll give it a try.

No doubt questions will follow:respect-057:

[Armsoft]

OK,
Had no luck with the web based flashing (kept getting DNS error when hitting flash)
Just tried using Dream*p and got the following message after switching the box on -

`Is not a valid interger value`

Any ideas?