typer
15-03-2009, 02:33 AM
Hi! Been having several issues since I bought my box. No incubus, no
sound on various HD trailers, no autostart for incubus, etc.
I now have the problem solved by a real guru that really helps people.
So I'm going to help you AZbox HD users as someone not from this forum helped me out!
First of all, dont use any firmware after the 1314 version, they all suck...
Now before installing the 1314 firmware, format application area and then install the 1314 version.
After that when the software is installed then go to settings and do a factory defaults reset.
Now install onestep emu.
After the install (even if it shows an error, it installs the emu),
change plugin priorities, making incubus the first one. Make sure incubus doesnt have the # symbol before, because that inactivates the emu.
Now go network settings, and configure a valid static IP, gateway and dns.
Now ftp to your box and save the incubus .conf file in the incubus folder, and change permissions of all files to 755.
Reboot the box.
Now when booted you should have your CS working. Incubus 0.55 doesnt work well with N3 providers.
This method works OK for connecting incubus and CCcam server 2.0.11 over a WAN connection.
Now you perhaps want to mount some network drives. The mount script
present in the mount plugin doesnt work for me, neither boots. But
changing the script to "mount -t cifs" instead of "mount.cifs" command
it works very well if you execute the script by telnet doing "sh
mount.sh".
If you boot the box and dont get CS working, you must go to plugin menu and start/restart incubus.
The mount script must allways be ran by telnet since the plugin menu doesnt seems to be able to start it.
Hope to have helped. Follow those tips and you are on your way to success with this box!
sound on various HD trailers, no autostart for incubus, etc.
I now have the problem solved by a real guru that really helps people.
So I'm going to help you AZbox HD users as someone not from this forum helped me out!
First of all, dont use any firmware after the 1314 version, they all suck...
Now before installing the 1314 firmware, format application area and then install the 1314 version.
After that when the software is installed then go to settings and do a factory defaults reset.
Now install onestep emu.
After the install (even if it shows an error, it installs the emu),
change plugin priorities, making incubus the first one. Make sure incubus doesnt have the # symbol before, because that inactivates the emu.
Now go network settings, and configure a valid static IP, gateway and dns.
Now ftp to your box and save the incubus .conf file in the incubus folder, and change permissions of all files to 755.
Reboot the box.
Now when booted you should have your CS working. Incubus 0.55 doesnt work well with N3 providers.
This method works OK for connecting incubus and CCcam server 2.0.11 over a WAN connection.
Now you perhaps want to mount some network drives. The mount script
present in the mount plugin doesnt work for me, neither boots. But
changing the script to "mount -t cifs" instead of "mount.cifs" command
it works very well if you execute the script by telnet doing "sh
mount.sh".
If you boot the box and dont get CS working, you must go to plugin menu and start/restart incubus.
The mount script must allways be ran by telnet since the plugin menu doesnt seems to be able to start it.
Hope to have helped. Follow those tips and you are on your way to success with this box!