View Full Version : Sky card went to sleep
oldfart
15-03-2009, 06:05 PM
It would appear that the DM8000 does not keep a sky card awake. Had to put card back into skybox to wake it up.
sonic1
15-03-2009, 06:07 PM
Can you elaborate in what you mean by it went to sleep ?
You mean it is not updating ?
oldfart
15-03-2009, 06:58 PM
It stops working - doesn't clear any channels.
You put it back into the skybox and after x hours (1-72) it works again.
sonic1
15-03-2009, 07:13 PM
Did it not work after a simple restart of the emu ?
oldfart
15-03-2009, 09:18 PM
no - it died half way through watching Five!
everton
15-03-2009, 09:31 PM
hi.for some reason sky card dont keep active in the dreambox it has to be put back in sky digibox for a few hours on sky news channel for the quick active update of your sky card so it works again ,,, dont know if this is 100% but iam 96% sure maybe:D
borderfox
18-03-2009, 09:49 AM
hi.for some reason sky card dont keep active in the dreambox it has to be put back in sky digibox for a few hours on sky news channel for the quick active update of your sky card so it works again ,,, dont know if this is 100% but iam 96% sure maybe:D
Have a sly card with a setanta sub in a dm500 and don't seem to have this problem?
Would be bad news if I did as I sold the dodgybox!
sonic1
18-03-2009, 11:19 AM
Seems strange as I have not put my card back in the original box for about 2 years.
I have had my card go to sleep a few times when it is running in my 7020but that is normally when the card is not i use ie watching a FTA channel.
Never when it is in use, I have had it running in Dm7000, 7020 and 800 but don't have the 8000 to test.
Maybe someone else can comment.
crabber
18-03-2009, 02:28 PM
Never had a problem either, with a FTV and full package cards in a 7020 and a 7000 running gbox and just recently Cccam.
Can you look at the entitlements oldfart :respect-050:
Gerry55
18-03-2009, 03:49 PM
oldfart
If you are using mgcamd/newcs have you got autoupdate set to
<au>on<au>
<sidoverride>on</sidoverride>
oldfart
18-03-2009, 05:54 PM
oldfart
If you are using mgcamd/newcs have you got autoupdate set to
<au>on<au>
<sidoverride>on</sidoverride>
Using NewCs_1.65/CCcam_2.05
which file would I 'try' and put those lines?
sonic1
18-03-2009, 06:18 PM
It's in the newcs.xml
etc/tuxbox/config
oldfart
18-03-2009, 06:38 PM
Never had a problem either, with a FTV and full package cards in a 7020 and a 7000 running gbox and just recently Cccam.
Can you look at the entitlements oldfart :respect-050:
entitlements ???
oldfart
18-03-2009, 07:03 PM
There are two entries for auto update, I guess I should change them both??
<sidoverride>off</sidoverride> to <sidoverride>on</sidoverride>
<newCSconfig>
- <!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dreambox/TD etc. that use SCI interfaces.
-->
<readers name="Dreambox SCI">
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci0</node>
<parity>None</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>Yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<pincode>0000</pincode>
<priority>Hard</priority>
</device>
<device>
<name>SCI Upper Slot</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>Yes</carddetect>
<newcamd_port>15050</newcamd_port>
<autosid>Yes</autosid>
<pincode>0000</pincode>
<priority>Hard</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>10001</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>internal</level>
<type>all</type>
<output>console,tcp</output>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>cccam</name>
<password>cccam</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>Yes</spider>
<cardlevel>1</cardlevel>
</user>
<user>
<name>Office</name>
<password>Office</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>yes</spider>
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<port>1234</port>
<enabled>NO</enabled>
<realm>myShares</realm>
</server>
<peer>
<hostname>remote</hostname>
<port>1234</port>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</peer>
<user>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>
Gone_Fishing
18-03-2009, 07:07 PM
entitlements ???
Running CCcam only and by using "CCcam Info" you can view the card entitlements and the dates when they will expire
So worse case scenario you could pop your card back in your sly box a week or so before they expire and they should update
TNT
It would appear that the DM8000 does not keep a sky card awake. Had to put card back into skybox to wake it up.
hi m8 can u test if it works without newcs like the dm800 :king-041:
oldfart
18-03-2009, 09:03 PM
Running CCcam only and by using "CCcam Info" you can view the card entitlements and the dates when they will expire
So worse case scenario you could pop your card back in your sly box a week or so before they expire and they should update
TNT
The only thing I get is:
"Welcome to CCcam 2.0.5 server"
No info at all ...hmmmmm
dubious
18-03-2009, 09:20 PM
hi m8 can u test if it works without newcs like the dm800 :king-041:
I tested this, it works on the 8k also.
Gerry55
18-03-2009, 10:21 PM
oldfart
also at the top of the xml file you should have this
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
oldfart
18-03-2009, 10:22 PM
.. sky card & local share .. need newcs & cccamd???
from your posts above, do I not need newcs??
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.