800 can't find sat positions

[po]

ever since i updated the drivers my box does not want to find satellite positions, any idea's to fix this problem?

cheers

[x5]

more info m8
what drivers ,image,sc loader?
u use diseq,motor?

[po]

pure flash in flash
latest blackhole on barry allen
diseq motor

i put the latest drivers in flash and image to try cccam2.11 with card instead of 2.5 with newcs
will not find some positions anymore.

[x5]

realy dont think as nothing to do with the drivers
tray revert back to 06/03/2008 drievers to see if fixes
im using a diseq motor and have no probs

[fced]

may be, your satellite.xml isn't good..;
i have positionner also, a vbox (not usals mode), and for some sat, i need enter transponder frequency in positionner menu > Tune > manual transponder...
because searching sat with the predefined transponders it don't work...
i have also notified i have better result to found sat, in Satfinder...

[echelon]

I have a similar problem with my diseqc switches , if I program just one position in the satellite is selected and found by the switch , but for more than one I find it wont automatically switch between the positions

it is not the switches as they work fine using a tm9100 9 which was there before ) and also works ok with a tm1500 as well

I have oozoon in the flash and tried bh0.7 and bh0.9 on usb stick , and the latest BA and latest drivers have all been added

maybe it depends on what is in the flash , not sure as yet , or maybe its a problem with the images. the box works ok as a slave box looped out of the tm,s

[fced]

i have 10 satellites with manual mode (not usal), it's the dreambox wich drive the dish...
no problem with it except you have to found and memorize each sat one by one

[sonic1]

@fced
Could you give info on what and how you configured with some screen shots maybe ?