PDA

View Full Version : MultiCAS v.1.57b


jgg
24-03-2009, 08:30 PM
PaPiTo,

In the MultiCAS v.1.57b, where is that we put the BoxKey and RSA of our card?
AJR
24-03-2009, 08:41 PM
Try

/EMU/OpenXCAS/MultiCAS/cardkeydata.txt

or enter the details directly (using the remote control) in the MultiCAS menu
jgg
24-03-2009, 08:53 PM
AJR,

Carry my one Boxkey and RSA in Cardkeydata and I transfered for the azbox by FTP, but does not function!?
AJR
24-03-2009, 09:01 PM
and I transfered for the azbox by FTP, but does not function!?

Did you reboot the azbox (so it will see the new settings) ?

Are all the files set to 755 ?
jgg
24-03-2009, 09:56 PM
Without result!
valerica
25-03-2009, 08:44 AM
It doesn't work with ROM 142 .

Cheers ,
Val .
jgg
28-03-2009, 02:42 AM
Please PaPiTo

Functions with loading of the facts by the command.

But the MultiCAS still is not it work correctly, therefore the reading of the rom 142 has some stops!
kebien
19-05-2009, 09:17 PM
Couple things I noticed :
MultiCAS has a key file embedded,meaning,if there is not key.bin file present,it will read the internal (into emu_module) and will dump it into the multicas folder automatically.
If there is a key.bin present,this is the one that will load at startup.
The file format is similar to most other boxes,like octagon,vantage,etc,but...
the file size for multicas is 35kb,while all others use 64 kb.
The octagon editor work,but the saved file size will not be correct.
Does anyone know of a multicas key file editor?

I actually learned a bit about the key file

irdeto

5F6001004F52462020202020202020202 02020200000000004BB4867324021B7
[.........channel name in ascii.........][provid] [ Id ][ key.........]

The keys layout is more or less the same for all encryptions.
I have problems to understand how does biss keys need to be entered,while seem obvious,entering keys manually is not working,nor is provided a way to enter channel names but only with a hex editor.
is the emu using the original channel name that it gets at scan?

Is there anywhere to read more about multicas emu?
is there a home forum or website?
zorr007
26-05-2009, 02:04 PM
Yes kebien, the confirm! At this moment is not possible to insert or to change manually a relative Biss new key of a new channel.
A my friendly beloved has tried in all the ways,if someone knows some system....
Thanks in advance and hi !