Webinterface - password goes where?

[oldfart]

Where does the username & password go on the DM??
There are settings to enable from main menu, but no option to insert ....

[Gerry55]

oldfart
on the 8000 you are unable to alter the password, i.e you dont need one

[oldfart]

oldfart
on the 8000 you are unable to alter the password, i.e you dont need one

OK ... so MAJOR security issue then, leaving Dreambox open on port 80.

[x5]

OK ... so MAJOR security issue then, leaving Dreambox open on port 80.

no m8
open dcc go to telnet and write
passwd them press enter
them put the passwd u want to use this will be your passwd for the dreambox and also for webinterface
It works with DM800 should be ok with DM8000

[oldfart]

What's the username ?? 'dreambox' ??

[AJR]

user ... root
pass .. dreambox

maybe

[oldfart]

Tried both of them - without first setting with passwd - they didn't work by default!

[x5]

Tried both of them - without first setting with passwd - they didn't work by default!

if u didint changed or not using a image backup they have to work

name = root
passwd = dreambox

[oldfart]

Yep - once issued the telnet cmd passwd login with username & password works!

[Gerry55]

Hi again oldfart
If you use DCC, set DCC up with any password you like and you can still login to the 8000

[oldfart]

Was talking about using the webif and need for security - going to log in from t'internet (remote) so need some security! Want to stream video remotely

[Gerry55]

what I ment was leave the std root/dreambox settings but login using DCC, with kingkong as the password, you will still be able to get in, so no password is necessary