Dm800 stops responding.

[Stev0]

i have a dm800 with nabilo 0.9 with all the latest drivers on. i have

cccam_2011 installed no other apps expect the one which come with

nabilo. i get a problem where the box will stop responding to the

remote/power button on the box. yet i can still watch the current channel

its on. the nabilo busy icon is always there. has anyone any ideas why??.

i have posted a list of process's currently being used and my cccam.cfg when it stops

responding.


PID Uid VmSize Stat Command
1 root 672 S init [3]
2 root SWN [ksoftirqd/0]
3 root SW< [events/0]
4 root SW< [khelper]
5 root SW< [kthread]
7 root SW< [kblockd/0]
10 root SW [khubd]
48 root SW [pdflush]
49 root SW [pdflush]
51 root SW< [aio/0]
50 root SW [kswapd0]
121 root SW [kseriod]
131 root SW [bcmemacd]
137 root SW [mtdblockd]
171 root SWN [jffs2_gcd_mtd3]
184 root SW< [fp]
208 root SW [cifsoplockd]
286 root SW [b_event]
287 root SW [b_idle]
433 root 1876 S nmbd -D
435 root 2608 S smbd -D
452 root 2600 S smbd -D
500 root 580 S /usr/sbin/zeroconf -i eth0
542 root 784 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host
566 messageb 1208 S /usr/bin/dbus-daemon --system
576 root 724 S /usr/sbin/inetd
588 root 756 S /sbin/syslogd -n -C 64 -m 20
590 root 708 S /sbin/klogd -n
731 root 888 S /usr/sbin/automount --pid-file=/var/run/autofs/_autof
849 root 728 S /bin/sh /usr/bin/enigma2.sh
852 root 47564 S /usr/bin/enigma2
865 root 47564 S /usr/bin/enigma2
981 root 47564 S N /usr/bin/enigma2
895 root 4180 S /usr/bin/CCcam_2011
897 root 4180 S /usr/bin/CCcam_2011
898 root 4180 S /usr/bin/CCcam_2011
899 root 4180 S /usr/bin/CCcam_2011
900 root 4180 S /usr/bin/CCcam_2011
901 root 4180 S /usr/bin/CCcam_2011
902 root 4180 S /usr/bin/CCcam_2011
903 root 4180 S /usr/bin/CCcam_2011
904 root 4180 S /usr/bin/CCcam_2011
907 root 4180 S /usr/bin/CCcam_2011
920 root 4180 S /usr/bin/CCcam_2011
921 root 4180 S /usr/bin/CCcam_2011
932 root 4180 S /usr/bin/CCcam_2011
933 root 4180 S /usr/bin/CCcam_2011
954 root 4180 S /usr/bin/CCcam_2011
964 root 4180 S /usr/bin/CCcam_2011
975 root 4180 S /usr/bin/CCcam_2011
1586 root 4180 S /usr/bin/CCcam_2011
1121 root 4180 S /usr/bin/CCcam_2011
968 root SW [kdvb-fe-0]
9702 root 580 S telnetd
9703 nobody 1420 S vsftpd
9704 root 972 S -sh
9707 root 1516 S vsftpd
10384 root 580 S telnetd
10385 root 968 S -sh
10401 root 852 R ps aux


CCcAM CONFIG

################################# ##############
#### Config ####
################################# ##############
# SERVER LISTEN PORT : #
SERVER LISTEN PORT : 12000
# ALLOW TELNET INFO : #
#ALLOW TELNETINFO: yes
# ALLOW WEB INFO : #
#ALLOW WEBINFO: yes
# WEBINFO USERNAME : #
#WEBINFO USERNAME :
# WEBINFO PASSWORD : #
#WEBINFO PASSWORD :
# TELNETINFO USERNAME : #
#TELNETINFO USERNAME :
# TELNETINFO PASSWORD : #
#TELNETINFO PASSWORD :
# TELNET INFO LISTEN PORT : #
#TELNETINFO LISTEN PORT : 16000
# WEB INFO LISTEN PORT : #
#WEBINFO LISTEN PORT : 16001
# ZAP OSD TIME : #
#ZAP OSD TIME :0
# OSD USERNAME : #
#OSD USERNAME :
# OSD PASSWORD : #
#OSD PASSWORD :
# OSD PORT : #
#OSD PORT :80
# SERIAL READER : #
# SMARTCARD WRITE DELAY : #
# EMM Blocker #
# SHOW TIMING : #
SHOW TIMING : no
# DEBUG : #
#DEBUG : no
# NEWCAMD CONF : #
#NEWCAMD CONF :no
# DISABLE EMM : #
#DISABLE EMM : no
# EXTRA EMM LEVEL : #
#EXTRA EMM LEVEL : yes
# Mini OSD #
#MINI OSD : no
# CAM KEY #
# CAMDATA #
# BOX KEY #
# BEEF ID : #
# PIN : #
# SOFTKEY FILE : #
SOFTKEY FILE : /usr/keys/SoftCam.Key
# AUTOROLL FILE : #
AUTOROLL FILE : /usr/keys/AutoRoll.Key
# STATIC CW FILE : #
STATIC CW FILE : /usr/keys/constant.cw
# CAID PRIO FILE : #
CAID PRIO FILE : /etc/CCcam.prio
# #
#LOG WARNINGS : yes
# #
# PROVIDERINFO FILE : #
PROVIDERINFO FILE : /etc/CCcam.providers
# CHANNELINFO FILE : #
CHANNELINFO FILE : /etc/CCcam.channelinfo
# #
# LOADBALANCE : #
# TRY ALL CHIDS : #
# POSTINIT : #
# DVB API : #
# #
# SHOW EXTENEDED CLIENT INFO : #
# EMM THREADS : #
EMM THREADS : 1
# MINIMUM DOWNHOPS : #
#MINIMUM DOWNHOPS: 0

SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
#SERIAL READER : /dev/usb/tts/0 smartreader+
#SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6000000
#SERIAL READER : /dev/usb/tts/1 smartreader+
#SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1 6000000

[Triad]

I have the same problem but do not know how to solve it.??
It happens once in a while, and nothing helps until it come on by itself !??

[NoMaD]

Hi,
Only with HD skin you get spinner (icon) busy ( with nab-BH )
this happens only on the dm800 and with all image ( others images are very slow in zapping channel and menu )

with HD skin U have to kill all process that U don't use for gain memory RAM
Or create and use a swap file

[Triad]

Ok, how to create and use swap file ???

[Triad]

Ok, I've managed to solve this situation!
It's needed few resets and nearing the remote control to the box some half meter near and pushing up and down buttons some time until it excepts commands on every click!!!
Heheh it's quite funny how i have to trick the box to work!
After it excepts every command when you're near it, start backing up further and further!!! :rolleyes::rolleyes:
After it you'll see that it excepts commands even from balcony let's say!
It works some time (about 10 hours) until it get dummed again!

Then repeat the procedure! ;)

[sonic1]

I have never had any problem with my DM800

Maybe I am lucky :p

My set up is OoZoon in flash which I run software update once a week.

Nabilo BH 0.9 on USB and no other images on USB

I have the latest Barry Allen which I always update { OoZooN does it for you }

CAJTON settings
CCcam 2.1.0

[Triad]

Strange you never had any problems with IR remote control reply in box!?
I have those problems from the start of using DM800 and have changed all the images and nothing helped, until I changed settings and channel list!
If channel list is smaller so it's using lesser memory it will zap faster and replying on remote will be without glitches!
I rearranged Likra's rotor list and deleted all unnecessary satellites, and now have much less problems with box IR remote replying, but still is not solved completely!?
It's quite odd how there aren't more ppl who have these problems with remote contact on boxes ir sensor !!???

It's not that we are the only one's, are we!!?? :001_07::respect-010:

[x5]

Strange you never had any problems with IR remote control reply in box!?
I have those problems from the start of using DM800 and have changed all the images and nothing helped, until I changed settings and channel list!
If channel list is smaller so it's using lesser memory it will zap faster and replying on remote will be without glitches!
I rearranged Likra's rotor list and deleted all unnecessary satellites, and now have much less problems with box IR remote replying, but still is not solved completely!?
It's quite odd how there aren't more ppl who have these problems with remote contact on boxes ir sensor !!???

It's not that we are the only one's, are we!!?? :001_07::respect-010:

this as been fix long time ago if u use last drivers and SC u will not have this probs

[Stev0]

i change my cccam to 2.10 and it never crashed since. i dunno if it was a bug in 2.11.