Motor and V Channel Issues

[joshjess]

My 800 has the latest Nabilo Blackhole image and I am having real issues where the receiver will not drive the dish nor will it get a signal on Vertical channels when it did and now not at all!

I had a similar problem with the loss of V channels on an earlier image.

Has anyone else suffered this problem? Can anyone recommend a way round?

Thanks

[loveman]

problem with loss of v channels could be down to the lnb going?! Might need to be replaced... As for the unable to drive motor, a lot of motors cannot be driven by dreambox as they don't provide enough power for them. Maybe your motor is one of these?!

[joshjess]

Thanks for the reply, I have a Stab motor and new LNB (I have attached a Protek and this is working fine)

[loveman]

A list of motors said working or not on dreamboxes:

1. Dark motor (not metal gear) OK
2. Stabb 120 OK
3. Super Dark motor (metal gear) OK
4. Motec 2100A OK
5. Motec 2100 OK
6. Cryptik Digital H-H Mount V-bracket OK
7. SM3D12 (Satracker) OK
8. Technomate 2100A OK
9. TM 2200 OK
10. Ch ess MD120 OK (Motor has no gotoX)
11. HH100 STAB/GbSAT Motor OK (gotoX not working)
12. Stab HH-90 OK
13. Dark Motor Metal Gear OK
14. Fortec Star SG2100 Motor OK
15. Technomate 2200 Diseqc motor (Updated version of the sg2100) OK (usals reported not working)
16. SatCatcher Protrack DiSEqC 1.2 OK
17. Moteck SG2100A Diseqc 1.2 Motor with USALS OK

[joshjess]

Working if its looped through another receiver!