View Full Version : universal flange lnb
mushroom
23-06-2009, 12:47 AM
hi
i have a dish with moter and inverto universal flange lnb.this lnb has two outputs.can i use these two outputs and catch horizontal and vertical frequencies on both my receivers?
satwyn
23-06-2009, 08:23 AM
a twin lnbf would work ok if you have the system setup why not try and see if the lnb is working ok if you have only one cable swap them over at the lnb side and see if it works ok
if it is the SP-IDLR-TWNFOO-CLASC-OPP: yes
http://www.inverto.tv/IMG/faq/IDLR-TWNF00-CLASC-OPP.jpg
enables the reception of signal from one satellite and its distribution to up-to two single tuner Set-top box (or 1 in the case of a twin- tuner STB)
Glenn_911
23-06-2009, 12:42 PM
hi
i have a dish with moter and inverto universal flange lnb.this lnb has two outputs.can i use these two outputs and catch horizontal and vertical frequencies on both my receivers?
mushroom
Yes you can no problem.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.