Possible Bug: Standbye ???

[terrorman]

I see a bug for 3 or 4 versions of the firm

This bug happens when we leave the AZBox Elite HD Standby

When we turn on if, but when you press to change channels, or menu, or OK to get a channel list, the AZBox Elite HD returns to Standby state

With you someone else?

[pr2]

Hello,

Don't you press too long on the power on button of the RCU?

I point out that the Azbox is buffering the RCU commands, so if it receives 2 times the power on command it will turn on and then immediately turn off.

So I don't know if the return to stand by mode is linked with the other key you press or not.

But can be interesting if you can always reproduce it to know the exact key sequence.

Sometimes you fell that the Azbox didn't get the stand-by or wake-up signal so you press the key once more so it will switch twice is status. And the behaviour looks like the one you describe.

Pr2

[terrorman]

does not appear to be double-pulse, but will do some checking

[xanadu]

The bug I have seen is when you turn on via the remote from standby, and the box stays on 'Wake Up' on the display.

Have to use the power switch on the back.

Seen this a few times on current firmware and the last unofficial version.

This is on Premium version.

[terrorman]

jejeje, I will not use the back button when we have a remote to do so.
The only problem is the ignition 2 times from the command

[pr2]

The bug I have seen is when you turn on via the remote from standby, and the box stays on 'Wake Up' on the display.

Have to use the power switch on the back.

Seen this a few times on current firmware and the last unofficial version.

This is on Premium version.

Strange my Premium never had this behaviour, which emu are you running on?
I just point out that sometimes, it tooks a longer time to start. It detects that there is a problem and the Azbox reboot by itself and then everything went fine.
I am running now 0.9.2371 with mgcamd (for the day to day watch and sometimes CCC for test). I have a fixed IP in the Azbox (not DHCP), and a monoblock Hotbird(13E)-Astra(19E).

[slacker17]

I have a premium and also have issues coming out of standby. I'm currently running 0.9.2371 and I recall the same issues with previous versions. When waking up sometimes it will just freeze with the display saying TV pressing any button send the box back into stand by. Other times the display on the tv will just show the azbox logo. So I end up having to hold the power button on the remote to re boot.

[xanadu]

Strange my Premium never had this behaviour, which emu are you running on?

Not running any EMU, or not intentionally anyway, as not got any to work yet, but still playing with that side of things.

[chemstar]

same over here

[slegs]

I have a premium and also have issues coming out of standby. I'm currently running 0.9.2371 and I recall the same issues with previous versions. When waking up sometimes it will just freeze with the display saying TV pressing any button send the box back into stand by. Other times the display on the tv will just show the azbox logo. So I end up having to hold the power button on the remote to re boot.

I had this consistently on my Elite last night. I went back to 2032 and all is fine now.

[terrorman]

for any reason, the variable that carries seven stanbye not 0, you have to look where the loose nut

[jgg]

Many times when doing the channel zapping,

reboot, reboot, reboot!!!

[chemstar]

never on zapping only during wake up

[pr2]

Many times when doing the channel zapping,

reboot, reboot, reboot!!!

Hello,

Do you download Gogo list information?
If the answer is yes do a reset to factory default and scan the satellite without downloading any Gogolist stuff, and you will see you will not more have problems.

Pr2