New CCcam release v0.2 Discussion

[happyhammer]

lets discuss it in this thread, not in the files area.

[gtg60]

I'll just repeat what I've found in case anybody missed it but for the recording to work properly you must have 'Timeshift' switched off.

Also, sometimes there is no sound when playing back HD recordings but if you exit and select it again it has worked for me.

[E.T.]

First of all I would like to thank the developer to make it possible to connect to a CCcam server.

Recording may be important, but I guess the users first want to have a stable CCcam wich can handle all cards.

For now C+ NL and TV Vlaanderen, both Seca3 are not working correctly, it try to get I2, after a few restarts and with some luck it works on Seca3.

SKY UK, Premiere World, both NDS are working great, and also ***view, viaacces is working fine.

So my request ( and I hope for a lot of other users also) is to fix the Seca3 issue ( or get rid of Irdeto2, it will be closed in a while anyway for the Dutch channels)

For the rest, keep up the good work :respect-048:

[iko]

for me multicline is the most important part to improve ;)

[aqa]

i cant get any hd chanals to work with this

[antrabe]

yesterday i test for first time cccam on my elite and it works much better than mbox less freeze picture but like iko say the most important its multi cline, i have very good cline but having more clines i think that freeze desapear completly. thank you very much to the stuff of this plugin for this wonderful work that they are doing.

[Carp95]

Guess multi C line after all cards are OK, indeed Seca3 is a problem ( C+NL and TVV ) it always looks first @ Ird2 ( 0622 ) can't we get rid of that ident?

Multiple restarts fources sometimes to ackt op seca ident ( and I found that doing this trough telnet it picks up seca better, strange?? )

Somehow we must get rid off that 0622 ident, I've blocked it in de client line but then I getr scrambled message.

So most important:

1 - Card fix
2 - Multiple C lines
3 - Internal cardreader support

And then yes only then server support

[humaxarie]

Is seca 3 even possible with cccam, or any other cs????

I thought that was 1 of the reasons that they changed from seca2 to seca3....

[alcatel]

i'm using mgcamd with Seca3 i got full image on C+nl and TVV.

[Aragos]

This is from files section. Don't know why I can't answer to the thread so I'll do it here:




recording HD channels, although it is not possible, cut

What do you mean by that? Can you record (encrypted) HD channels or did you mean it doesn't work yet?

Thanks! :)

[pr2]

Hi,

With mgcamd you can record and HD channel and watch another one (also HD) on the same TP without any problem.

Pr2

[robins69]

I think we need implemented some option for prio channels, because in D+ Spain Azbox always want to decode by nagra3 first.

Regards.

[Carp95]

Is seca 3 even possible with cccam, or any other cs????

I thought that was 1 of the reasons that they changed from seca2 to seca3....

Yes Seca 3 is possible with CCcam even with all the other softcams, the reason they changed to Seca 3 is that Seca 2 was open/hacked.

Other emu on Az like mgcamd means for me that I have to rebuild my server on newcs ( that wasn't what I'am hoping for )

If it doesn't run onm CCcam then we don't have full CCcam support on Az

[Aragos]

With mgcamd you can record and HD channel and watch another one (also HD) on the same TP without any problem.

Yes, thanks. But it's the CCcam thread so I've asked if it is possible with CCcam? ;)

I'm not sure what terrorman really meant.

[pr2]

Yes, thanks. But it's the CCcam thread so I've asked if it is possible with CCcam? ;)

I'm not sure what terrorman really meant.

Hello,

I know and I was sure that somebody will make this remark.
All I want to say is that today the AZbox is already able to decrypt 2 HD channels at the same time with mgcamd, so there is no hardware limitation.

So if it doesn't work today with whatever Emu (in this case CCcam), it is just a question of time for developpers to have it working properly on the Azbox.

Pr2

[MACA1965]

Multiple C lines will bee terrific.

[iko]

Multiple C lines will bee terrific.

+1:flowers-007::flowers-007::flowers-007::flowers-007:

[radioboy]

Can anyone tell me this.
I take it i download the install of this plugin from the plugins list in my azbox. (And what is the correct download filename as there are a lot of plugins in the list)

Then use the 1.2 installer program to enter my c line.

Radioboy

[terrorman]

I am working on 0.1 for Spain seca & n3 works much better.
try the 0.3 coming soon, thanks for the work they are doing the team, I am happy.

[xanadu]

I did try installing this cccam but it just locks the receiver just like Mbox does, as both unusable and have to power off receiver.

I copied the cccam file to openxcas and chmod 755 and added line to module.seq config file. Did I miss anything?

I might just reinstall all the EMU when i get a chance as none of them seem to work.

Not even got Digitv to work with latest keys and mgcamd.

[iko]

don't try to run more than one emu at once ;)

[BE-COOL]

And keep the timeshift off, it will drive your receiver crazy...

[Dig Deep]

Still having problems with Viasat and or Conax.

Running conax in slot and via using Via red cam.
Switching beteeen them could give a "scrambled" answer:coolgleamA:

Reboot is what helps for the moment.

[iko]

I wish to Try First Ever Multi Cline Cccam This Weekend :D
Is there any chance?
What do you think???
This will be a big Step forward For AzBox ;) Even If not this weekend I do feel It's not far away LOL

[sami8519]

yes with The Ripper everything could be done. Thanks to him.

[Taykun]

multi clines should be no1 on "to-do" list. Recording isnt really important. Multi cline option is.

BTW. This cccam version is working great. Thanks for this.

[hanswurscht]

multi clines should be no1 on "to-do" list. Recording isnt really important. Multi cline option is.

BTW. This cccam version is working great. Thanks for this.


Its maybe for YOU important, but most People need only one Line AND Recording, so now u know whats important? :)
Also "important is reading Cards,EMM, there are a lot of Peaces "important", but major is a good recording

[iko]

Its maybe for YOU important, but most People need only one Line AND Recording, so now u know whats important? :)
Also "important is reading Cards,EMM, there are a lot of Peaces "important", but major is a good recording

for you LOL
first we need to clear and than record ;)

[MACA1965]

lines first

[AJR]

reading
recording
lines

[iko]

reading= lines ;)
recording :D

[tapper]

recording already works dosnt it..??

[radioboy]

:smash:Would be nice to have a line to enter and test.
I am still trying to find one.:banghead:

Radioboy

[iko]

cccam and recording works for me ;)

[medmed]

and me it's working very nice (CCCam and recording) .
i look 0.3 version , please tapper (multi server support)

[Smudger]

Workng fine for me. able to record no problems.

[iko]

yeas pls the ripper we want to enjoy multi client ;)
first ever multicline :D
weekend not over guy we have few more hours Lol

[antrabe]

when i try to record not appear problem but then i reproduce the file and black screen does anyone why?

[iko]

You mean when you want to watch the file?
if so that's normal just leave it like that 5-10 seconds it will start to play ;)

[antrabe]

yes now im recording airpower 09 in orf hd with this firm never reboot while recording its the first that i test and not happen that but when i reproduce the video screen is black but it seems to play normally

[pr2]

Hello,

Do you disable Timeshift on your Azbox?
Black screen are typical when you let timeshift running and trying to record with CCcam 0.2

Pr2

[antrabe]

it could be that but how disable timeshift? is a fool question but i dont see the button or menu.

[pr2]

While watching TV press the Menu button and there you will have Timeshift option.

[antrabe]

i have checked and it was cancel then i think that it was right no?

i test to record select usb1 and also black screen i dont know why.

Also try with fta channel and then yes record fine.

[pr2]

Hello,

When you are on the channel you get the picture right?
But the recorded file show you only a black screen?

Are you 100% sure that you use CCcam 0.2 in your AZbox or do you still use an old version?

Pr2

[antrabe]

thank you for your help,

yes i can watch the image fine always begins with a freeze but then change of channel and the image came back fine.

i use cccam 02 its the first that i installed and im surprise like it works its incredible because open all and without freeze the only problem that i cant record always black screen.

i was recording almost one hour and the file.ts only 13mb this is the reason why only 13mb.

I think that there is a bug when format the usb always 96% and stop i have to reboot.

[iko]

r u trying to record on USB stick or usb2 external HDD ?
if its USB stick most of the USB sticks data transfer rates are low which fails the recording ;)

[antrabe]

yes usb stick data traveller kingston of 4gb could be for that?

i have recorded anixe hd and its ok. i will test with hdd i know that it was possible to record directly to the hdd of the pc no? i will try because now i havent hdd portable

[iko]

not good mate
I've trouble like you ,now I have 2.5" USB hdd and works great ;)
I do recommend you to buy USB hdd if you've got elite or internal hdd if you got premium ...
I hope that helps

[antrabe]

ok thanks i will try with the hdd of my brother and then i will buy one, thanks

[Smudger]

I think we need implemented some option for prio channels, because in D+ Spain Azbox always want to decode by nagra3 first.

Regards.

I belive there is also a problem with the new sly HD NDS card my server guy tells me the CAID I'm looking for is the old not the new. SD opens ok. He told me what to add to my prio file.
But we don't have one on our cccam any solutions?

================================= =================================
[06:38:57] ECM: CA ID: 0x0960 NDS -> CA PID: 0x0502
[06:38:57] *ECM: CA ID: 0x0961 NDS -> CA PID: 0x0502
[06:38:57] ECM: CA ID: 0x0963 NDS -> CA PID: 0x0502
[06:38:57] ================================= =================================


I'm using cc 02. and latest firmware.

Smudger

[happyhammer]

I belive there is also a problem with the new sly HD NDS card my server guy tells me the CAID I'm looking for is the old not the new. SD opens ok. He told me what to add to my prio file.
But we don't have one on our cccam any solutions?

================================= =================================
[06:38:57] ECM: CA ID: 0x0960 NDS -> CA PID: 0x0502
[06:38:57] *ECM: CA ID: 0x0961 NDS -> CA PID: 0x0502
[06:38:57] ECM: CA ID: 0x0963 NDS -> CA PID: 0x0502
[06:38:57] ================================= =================================


I'm using cc 02. and latest firmware.

Smudger

i think you must wait for later releases of cccam.
What version of cccam is the server using? up to 2.011, incubuscamd v0.55 could be used.

[Smudger]

I think it's on 2.011 will give Incubus a try to test but I think you right about waiting for next release.

[tapper]

I have a similar if not the same issue, I'm running CCcam v0.2 and the latest firmware

from a telnet session I've manually started CCcam and can see the successful ecm requests for Sly SD channels going through, but as soon as I select a HD channel there are no requests at all. flip back to a SD channel and ecms start again,

but this is only v0.2 of CCcam I'm sure it will get sorted as well as multi cline

keep up the good work mower/ripper

[Smudger]

I Tried IncubusCamd could'nt get to work. Will have to wait for a Cccam solution. :respect-049:

[goran]

https://www.satpimps.co.uk/showthread.php?t=111141

https://www.satpimps.co.uk/showthread.php?t=108950

:cheers2:

[goran]

https://www.satpimps.co.uk/showthread.php?t=111637

https://www.satpimps.co.uk/showthread.php?t=111369

https://www.satpimps.co.uk/showthread.php?t=111067

[Smudger]

Am I missing somthing as to the purpose of the links.

I aready have Cccam working and able to use IncubusCamd as I used it before Cccam.

My probelm is Cccam can't handle the new sly 0963 Caid and IncubusCamd cant run with 2.1.1 server.

Thanks anyway it may help someone.

[goran]

...missed it... sorry... let it stay... in case...:respect-051:

[Dig Deep]

Something else.

If I leave the box on over day it won´t work when I get back home.
The word scrambled is there:rolleyes:

but, as always, a re-boot fixes that.

So, when in trouble - always try a re-boot. It´s an easy way to test and booting is rather fast in this box.

[Carp95]

So there goes multi c line, first things first and thats support off all now used crypts like seca3 and latest NDS

[antrabe]

I am working on 0.1 for Spain seca & n3 works much better.
try the 0.3 coming soon, thanks for the work they are doing the team, I am happy.

Terrorman do you know more or less if appear this week the release 0.3?

[iko]

we can't wait for multicline support :D

[MACA1965]

It seems we will wait long time.

[tinos]

It seems we will wait long time.

Do you have proof or just guessing?

[dveras]

cwe belive in azbox... sure, new upcoming specs, arrives as soon as will be possible

[iko]

is there any news about multicline support???
cheers ;)

[MACA1965]

houp dies last

[slegs]

I'm happy with 1 cline. I don't care if it is ever multiline. it works great too. Thanks Ripper

[goran]

It stops/freezes every so often [like 30 minutes or so] at my end [NDS, I2] and it needs restarting [or sometimes even rebooting]...

But fast to start and works pretty well, while it's going, yes... ;)

[iko]

that also happens here but not that often...
I hope to watch multicline this weekend :D
thanx in advance to Ripper to make that happen ;)

[gtg60]

I'm very happy at the moment and very rarely experience freezes, thanks The Ripper!

For me I would like hope the following happens in this order:

1. EMU
2. Multi C line
3. Twin tuner capability for when the AZBox actually gets it!!

No panic though! Very happy with the progress rate!

[iko]

more cline gives better result on cccam, so with only 1cline we should expect some glitches that's very normal ;)

[MACA1965]

Iko you are the man.

[goran]

Nah, his woman is!!!! :rolleyes: :D:sifone::respect-039::respect-023:

[iko]

Nah, his woman is!!!! :rolleyes: :D:sifone::respect-039::respect-023:

LOL too much vodka LOL :D

Is reaper still with us or the game over???

[Taykun]

does Sky UK HD channels work on this cccam?

[mushroom]

Is reaper still with us or the game over???

yeap he is back :)

[Smudger]

does Sky UK HD channels work on this cccam?

It depends on how the server and card setup. I did receive sly HD with no problems then server guy had card problems. He now has white card and now I don't have sly HD.
well until we have a prio file or some other way to control the CAID with our Cccam as sky now have new CAID.

[Taykun]

ok i will use mbox for now

[chrisuk76]

Does this work with Sly HD 28.2e from a C Line?

Cheers

[iko]

yes ;)

[Taykun]

It depends on how the server with the card is setup. I did receive HD with no problem then server guy had card problems. He now has white card and now I don't have HD.
Until we have a prio file or some other way to control the CAID with our Cccam as sky now have new CAID.


what about other HD channels? Like those on 1W and those in Sky Deutschland?

[Tarzan]

what about other HD channels? Like those on 1W and those in Sky Deutschland?

They all work fine except "TV Norge HD" on 1W...

[deffc0n]

My AZ Premium work very fine this CCcam ;)

[colla]

If something doesn't work as you except

Try to write your own cccam client :-) with


CCcam protocol analyser v0.1 ALPHA (open source)


################################# #####
# CCcam protocol analyser v0.1 ALPHA #
################################# #####

This alpha code will provide you with the fundamental information needed to create a CCcam client/server. By extending this program you will gain a powerful tool when analyzing the protocol.

At this stage it includes the CCcam encryption and login process. It's not the full specifaction of the protocol, I only worked on it for about 3 days (reverse engineering and coding). By looking at the log generated by the tool you should figure out how the shares are transmitted to the client. The ecm part has some extra obfuscation, but you should be able to figure that out yourself…

Eclipse C/C++ project is included with the source code. You need the boost library installed, when building make sure to make a symbolic link boost_system-mt_s etc. this will allow static linking for a release build.

When you make use if this work, a small "thank you" notice in your release notes isn't much too ask. This code is placed under the GNU GPL V3. Also think about sharing your work with the community


_http://dreamworld.vg/ulc/index.php?action=downloadfile&filename=cccam_protocol_analyzer. zip&directory=Emus%20und%20Cardserver/Emus/cccamd/Tools&

[xanadu]

I recently tested a c-line, and was getting slight glitches every few seconds on all the Sly packages, particularly HD.

Is this normal for the NDS packages on Azbox HD?

Is anyone getting glitch free HD?

[Smudger]

I recently tested a c-line, and was getting slight glitches every few seconds on all the Sly packages, particularly HD.

Is this normal for the NDS packages on Azbox HD?

Is anyone getting glitch free HD?

Should not on a good server, I had perfect sly HD packages until the new white card came along. In my case it's because of the new CAID which our CCcam appears not to handle yet.

I would love to be able to test a new cccam when available as I believe my server maybe one of the only ones with a new style white card setup.

[Smudger]

what about other HD channels? Like those on 1W and those in Sky Deutschland?

I was only refuring to sly hd

[Tarzan]

I recently tested a c-line, and was getting slight glitches every few seconds on all the Sly packages, particularly HD.

Is this normal for the NDS packages on Azbox HD?

Is anyone getting glitch free HD?

I have started getting this glitches recently...

[Dig Deep]

This version works very good.

I use an old DM500 as server and have no problems, really

What could happen is that I could be forced to re-boot when I get back home after a (´hard) days work :D

That´s not a problem, goes fast, like sh!t from a shine shovel.

45 seconds :respect-054:

[kanber_kav]

If something doesn't work as you except

Try to write your own cccam client :-) with



_http://dreamworld.vg/ulc/index.php?action=downloadfile&filename=cccam_protocol_analyzer. zip&directory=Emus%20und%20Cardserver/Emus/cccamd/Tools&

no runing

root@dreamvdr-desktop:/var/bin# ./run.sh
20:07:34.228 CCcam: ================================= ================================= ====
20:07:34.228 CCcam: starting CCcam 2.0.9 compiled on May 20 2008@21:53:25
20:07:34.228 CCcam: ================================= ================================= ====
20:07:34.229 CCcam: online using nodeId 2e8a05ed4b83f215
20:07:34.231 CCcam: read config: cannot open /var/tuxbox/config/newcamd.conf or not found
20:07:34.231 CCcam: dvb api3 detected
20:07:34.232 CCcam: create 1 cam device(s)
20:07:34.232 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found

[kanber_kav]

20:07:34.232 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
20:07:34.232 CCcam: static cw not found or bad
20:07:34.232 CCcam: parsed 18 entries from /var/etc/CCcam.prio
20:07:34.235 CCcam: added 708 provider names from /var/etc/CCcam.providers
20:07:34.377 CCcam: added 4258 channel names from /var/etc/CCcam.channelinfo
20:07:34.377 CCcam: server started on port 17500
20:07:34.415 CCcam: connect to CCcam 192.168.2.3:17500 user: evim
20:07:34.419 CCcam: login succeeded on 192.168.2.3:17500
20:07:34.419 CCcam: no working cam devices, no need to start pmthandler


run.sh
#! /bin/sh
LD_PRELOAD='./cccam_protocol_analyzer.so' ./CCcam.x86 -d -n -t

//////////

[xanadu]

Should not on a good server, I had perfect sly HD packages until the new white card came along. In my case it's because of the new CAID which our CCcam appears not to handle yet.

I would love to be able to test a new cccam when available as I believe my server maybe one of the only ones with a new style white card setup.

I have a better server now with no glitches, but no HD due to new white card problem.

Hope we do get a new version of cccam.

[goran]

The new original is out.

Now, if K_K and co. can make it all work on AZbox HD..... ;) :cheers2:

[Smudger]

I have a better server now with no glitches, but no HD due to new white card problem.

Hope we do get a new version of cccam.

We just have to wait, it's a shame the old card was damaged. As this Cccam worked very well on HD.

:respect-050: