Bugs/problems that i found

[Taykun]

Ok, yesterday i got brand new Elite HD and i already noticed a few problems/bugs. Here is the list:

- when I choose croatian subtitles on HBO Adria (digi tv) they normally show up but when i reboot azbox, i need to choose croatian subtitles AGAIN. Does anyone else has same problem?
- when i set resolution to auto or 1080p i get normal picture. When i set resolution to 720p, 1080i or lower one i always get corrupted picture (only half of the screen is filled with picture for example). I have 42x10 (720p resolution TV) Panasonic plasma which is working normal.
- when i want to go out of teletext menu i must press back button. Why isnt possible to exit from teletext with "TEXT" button? I dont understand!
- č and š (windows-1250 - i think) letters doesnt work. I am used to subtitles but č and š dont work!!
- when device is powered on from stand by it takes quite some time that TV detects signal!
- EPG doenst work on TotalTV channels?? Does anyone has same problems or is it just me???
- today i was watching stargate continuum 720p movie and picture was stuttering (not all the time). Iam using 16GB Patriot USB stick. On WDTV HD everything was ok. Here is info:

General
Complete name : Stargate.Continuum.2008.Blu-ray.720p.x264.DTS.HDBRiSe.mkv
Format : Matroska
File size : 4.39 GiB
Duration : 1h 38mn
Overall bit rate : 6 372 Kbps
Movie name : "Encoded_by_HDBRiSe"
Encoded date : UTC 2009-06-29 09:03:07
Writing application : mkvmerge v2.9.0 ('Moanin'') built on May 22 2009 17:46:31
Writing library : libebml v0.7.7 + libmatroska v0.8.1

Video
ID : 2
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Muxing mode : Container profile=Unknown@4.1
Codec ID : V_MPEG4/ISO/AVC
Duration : 1h 38mn
Bit rate : 4 731 Kbps
Nominal bit rate : 4 861 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16/9
Frame rate : 23.976 fps
Resolution : 24 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.214
Stream size : 3.25 GiB (74%)
Title : HDBRiSe ™
Writing library : x264 core 67 r1171M 2c7cb4c
Language : English

Audio
ID : 1
Format : DTS
Format/Info : Digital Theater Systems
Codec ID : A_DTS
Duration : 1h 38mn
Bit rate mode : Constant
Bit rate : 1 510 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Surround: L R, LFE
Sampling rate : 48.0 KHz
Resolution : 24 bits
Stream size : 1.04 GiB (24%)
Title : HDBRiSe ™
Language : English

Iam using newest firmware! We should make thread where all bugs would be written!

[Taykun]

I also want this thing.

http://www.shrani.si/t/3J/wR/3AkzKyl2/epg-123307688988952.jpg (http://www.shrani.si/?3J/wR/3AkzKyl2/epg-123307688988952.jpg)

There should be percents too not only graphic! I think this is must have fix.

[radioboy]

Are you running the latest firmware????
Doesnt seem that bad this end..


Rad

[gtg60]

@Taykun
If you did a search you would see possible explanations for your problems.

For Bugs have a look here:
http://www.myazbox.de/database/bugtracker/bugtracker0-9-2371.htm

[scandinav33]

Hi,

I also got my azbox (premium) recently and I have been playing a bit around with it (even though I haven't had that much time yet).


- when I choose croatian subtitles on HBO Adria (digi tv) they normally show up but when i reboot azbox, i need to choose croatian subtitles AGAIN. Does anyone else has same problem?

Yes, I think that is a well-known bug that has existed for a while (also in firmware 2032, that I'm currently using). I also have to enable the subtitles actively each time I want to watch a channel where the subtitles are streamed seperately (and I'm living i scandinavian) and not pre-incoorporated into the images/video.
It would of course be super if that bug could be ironed out.


- when i set resolution to auto or 1080p i get normal picture. When i set resolution to 720p, 1080i or lower one i always get corrupted picture (only half of the screen is filled with picture for example). I have 42x10 (720p resolution TV) Panasonic plasma which is working normal.?

I had some similar problems when I tried to use the newest firmware (2371). The picture got corrupted - I also experienced it at "auto" even though "auto" normally (if not always) gave a 1080p output - even for SD channels. I hope the programmers intent to change it so that "auto" means that it will deliver the broadcasted signal (without upscalacing/downscaling).
I'm in general not extreemly impressed by the current picture quality. The upscaled 1080p picture I get out of the azbox via the HDMI is more noisy/shaky/flickery than what the scart connection of my relook 400s delivers.


- when i want to go out of teletext menu i must press back button. Why isnt possible to exit from teletext with "TEXT" button? I dont understand!

Yes, it is the same here, but I don't think it is a major issue - at least not for me :-).

[iko]

why are you selling the Remote control Dude :D

[Taykun]

@Taykun
If you did a search you would see possible explanations for your problems.

For Bugs have a look here:
http://www.myazbox.de/database/bugtracker/bugtracker0-9-2371.htm

Thanks for this link!! Its really good. Does opensat know about this site where problems/bugs and wishes are listed? I hope they do :))


And yes iam selling remote because i have TWO :). I sent faulty elitehd to opensat and got brand new one.

[Taykun]

More problemsss...

I was recording HBO Adria channel on 16E. Well guess what happened? Device restarted itself.
Also everything is quite slow. Iam not satisfied at all. Octagon sf908 is better when it comes to SD quality, stability and speed. Damn...

2371 firmware isnt that good. I think 2032 is better, what do you think?

[AJR]

what do you think?


Welcome to the 'Almost fit to be beta' club. :D

[Taykun]

another thing...

I found out that all videos stutters if i play them from USB stick! LOL WTF?
If i play them via network everything is ok.

I dont understand, 16GB (NTFS) Patriot worked OK in my previous HD player (wd hd tv). Strange...

[hanswurscht]

Try to copy something from your PC to USB, you will see only 1500KB/s Speed.
They have done something with the Speed, dunno why

[Taykun]

Have you sent this problem to Opensat?