AZBox and CCcam

[EMKWRX]

I have an Eagle box which I have got the homeplugs working with CCcam and everything is OK. I have now got a new AZBOX and have had a memory lapse as to how I can get the new line (homeplug with different IP) to operate with CCcam. Is there anything special I need to do with the new line for the AZBox e.g. Port Forwarding etc

Sorry if this thread is in the wrong place.

[goran]

For CCcam, as a client - no. All you need is in AZbox HD!

You have the intro, how to do it - it's very simple...

Read the Stikies...:respect-051:

Good luck!:cheers2:

[EMKWRX]

I tried 1 c line the other day using the new line and could not get it to work. I then unplugged the new line and put in the cable from my Eagle Box homeplug and it worked.
Last night I tried again with the new line and I was still not able to clear.

I will have another try later this evening to see if I can get it going. Please confirm that only 1 c line will work for now.

Thanks

[iko]

What are you trying to do basicly?
trying to use eagle as a server and azbox as a client?
Cs in local network?
or anything else?

[goran]

Please read the Sticky on how to flash your rec: post 17 or 18, I think... written by yours truly... ;):respect-051:

Edit: as iko says:

-dyndns if via internet and

-IP if local network sharing is the case

-all else is the same...

[EMKWRX]

Ideally I want to replace my eagle box with the AZBox and be able to use CCcam like I do with the Eagle in the main room. The plan would be to move the Eagle box to another room and use it as a client.
Hope this makes sense, I still have a lot to learn with this hobby.:respect-050:

[iko]

ok you need to edit your eagle box cccam.cfg and add an F line for azbox
F: username password
azbox side
C: ipadressofeaglebox port username password


Eagle server,azbox client
That's it ;)

[goran]

AZbox HD is much simpler than DBox2 or Drambox [stealing from it] etc.

Very simple! It is even simpler if you read my posts on "How to..."

All there for all to use, easy-peasy, if you have a little patience!

Within a few hours, I guarantee, it will all work!!!

Cheerio!:respect-051:

[pr2]

ok you need to edit your eagle box cccam.cfg and add an F line for azbox
F: username password
azbox side
C: ipadressofeaglebox username password port

Eagle server,azbox client
That's it ;)

Hello,

Be carefull the format of the C Line is:

C: ipadressofeaglebox port username password

Pr2