Problems with one frequency on astra 19,2

[Taykun]

Astra 1KR (19.2E) - 11023.25 H - Txp: 37 - Beam: Astra 1KR DVB-S2 (8PSK) - 22000 2/3 - NID:133 - TID:8


Iam trying to add this frequency but with no success. No signal!
Can someone tell me which settings i need to use for adding this TP successfully?


Thanks

[Taykun]

ok, i was able to add those HD channels to my list and they work but receiver only shows 0% signal quality. LOOL

[Giga]

somewhere you should have a setting for pilot: it should be on. al other parameters are ok and reception ok here.

[Taykun]

http://www.shrani.si/t/T/QI/1x51EpZ7/13072009.jpg (http://www.shrani.si/?T/QI/1x51EpZ7/13072009.jpg)

what should i change?
I tried setting pilot to 1, FEC to 2/3, auto and 3/4 and nothing works


grrrr

[goran]

Astra 1KR (19.2E) - 11023.25 H - Txp: 37 (http://en.*********.net/tp.php?tp=37) - Beam: Astra 1KR (http://en.*********.net/beams.php?s=92&b=128)DVB-S2 (8PSK) - 22000 2/3 - NID:133 - TID:8 - working fine here, just checked.

But - similar to you - I recently lost HRT2 and it was down to the corruption of the system...

I had to reinstall everything. :(

Much better then! :)

[pr2]

Hello,

DXers (feeds hunter) reports that sometimes they need to define the TP frequency +/- 1 MHz to catch the signal.

Azbox tuner is very sensitive but also very sharp so if on your installation for whatever reason there is a slight frequency swift you must reflect this in your Azbox setup.

Pr2

[Taykun]

Astra 1KR (19.2E) - 11023.25 H - Txp: 37 (http://en.*********.net/tp.php?tp=37) - Beam: Astra 1KR (http://en.*********.net/beams.php?s=92&b=128)DVB-S2 (8PSK) - 22000 2/3 - NID:133 - TID:8 - working fine here, just checked.

But - similar to you - I recently lost HRT2 and it was down to the corruption of the system...

I had to reinstall everything. :(

Much better then! :)

How can i reinstall everything?

Does that mean that i cannot use backup of my list and antenna settings?

[goran]

You should have backed it all up when it was working really well, after the first install - not now... now it's too late... Next time think ahead!!!

Use Sofrenic or Telesat settings/channel list -> then edit it according to your needs [internally! - my warm recommendation]...

No need to delete the plugins, just

-delete all the channels, then

-put the FW in again,

-reset,

-sort out all the Settings from scratch

-put the channel list in...

Good luck!:respect-051:

[Taykun]

thanks

i will wait for new FW and then i will reinstall everything.

I like sofrenic list but its a bit outdated now. Do you have any good list (updated with Sky Deutschland) with these satellites (1W,16E,13E,19.2E,28.2E?

[goran]

No. My setup is different. So, why don't you make one for all to use, if you think it's "outdated"? ;)

[Taykun]

ok i fixed this problem. 11022 is correct frequency for azbox. :=)

And sofrenic released new list. Great!