Technomate 6800/6900 super

[bob]

New update for Technomate 6800/6900 super DigiTV AU, ******** Analyzer. Farmware 687p

[holmroad]

Yes - latest patch seems to be working perfectly so far - except the DigiTv AU has not yet been tested of course!
Not really quite sure how to use the new spe ct r u m analyser - assume its for accurately locating satellites!:number-one-043:

[drahcirk]

loaded new file yesterday ,and some pretty weird stuff in 8281, dont know what thats about,???/

[holmroad]

loaded new file yesterday ,and some pretty weird stuff in 8281, dont know what thats about,???/

Havent really played about with it yet - will have a look at it later!:respect-050:

[Giga]

Yes - latest patch seems to be working perfectly so far - except the DigiTv AU has not yet been tested of course!
Not really quite sure how to use the new spe ct r u m analyser - assume its for accurately locating satellites!:number-one-043:
Could use this to test cable and LNB('s): loss of some frequencies.
Think you might need a prefabricated lab measuring grade sat cable for the lnb testing?

[holmroad]

So maybe its more for satellite engineers' setting up use?:respect-046:

[drahcirk]

got 4 up on yellow, how does that compare to urs h,.

[Giga]

if you are talking about the analyzer?
you should not have a sharp drop somewhere, could indicate some frequencies are not getting thru. Default it shows the low frequency using the 22Khz switch (ON/OFF), it shows the upper frequency of that lnb.
it shows sometimes in light blue, anyone have a clue what the difference is between yellow and light blue bar?
Anyone already found some instructions on this beauty?

[drahcirk]

in the menu, what does host relate to ,any idea,

[RABBY]

Just installed [ Firmware 687p ] As for the [ Analyzer ] Looks to me [ Yellow ] No Signal ??[ Light Blue] Good Signal ?? But I have Alse a [RED ]Bar ? Fook Knows what that is ??LOL:banghead:


P.S [ 8281, ] Lost with that one as well??:smash:

[Giga]

Astra 2 & Eurobird 1
Yellow: signal received
Light-blue: frequencies in the transponderlist
Red: current frequency
Green: lock frequency

http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/Astra2D.jpg

1 West
Signal drop: LNB skew? Not used frequency? Bad LNB or cable?
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/FrequencyThordrop-1.jpg

normal signal?
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/192Astra1LHLow.jpg
red bar:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/Frequencyredbar.jpg

SVHS captures

[drahcirk]

my 28s the same as urs g, only mines a bit lower the rihgt hand side yellow that is,.

[Giga]

most likely, different LNB, different cable type and length and alligment of the dish.
TDS 110, ALPS twin BSTE5-101B, 30 meters Hirshman KOKA 799 & Nedis 1.0 4-way DiSEqC switch.

[Giga]

[ 8 2 8 1, ] Lost with that one as well??:smash:
well somewhere there, look at the bottom of the screen for getting in the filter screen where you can enter c a i d and i d e n t of the provider for the c a r d s h a r i n g
Think this only passes the correct demands to the c a r d s e r v e r and not passing incorrect requests from other providers. Also read this thread: Ethernet & Serial Treat (https://www.satpimps.co.uk/showthread.php?t=95126)

[johntee50]

8281 now shows 24 possible connections, but I can only get numbers 1 to 4 to actualy work. Do we still have only 4 usable connections ?

Regards to all, JT.

[Giga]

8281 now shows 24 possible connections, but I can only get numbers 1 to 4 to actualy work. Do we still have only 4 usable connections ?

Regards to all, JT.
could be a difference when used with serial or ethernet? think this was a fix for serial having working 4? I'm not in to this C S thing.

[johntee50]

Hmm, I'm using ethernet. Never used serial because the ethernet works well. I'll await developments.

Regards to all JT.

[KnockJohn]

Guys, How do you get to the analyzer?

[johntee50]

Menu
Instalation
Motorised Settings
Yellow button

Regards, JT.

[holmroad]

I would have thought it common courtesy to explain this to everyone rather than throw us all in at the deep end?
It farcical!:respect-057:

[KnockJohn]

Thanks Johntee - I got there in the end.

On a different point I have noticed that Rai, mezzo and Equidia PRO are not clearing now. DK and Globo are fine as are **** channels (with card)

Any advice on the softcam would be greatfully received

[Giga]

I would have thought it common courtesy to explain this to everyone rather than throw us all in at the deep end?
It farcical!:respect-057:

Sorry:

while viewing press green button
https://www.satpimps.co.uk/showthread.php?t=113360 <= click here for the posting.

everyone is out on factfinding for this one?

[drahcirk]

dont understand that one, u did say in an earlier thread to use the green button, but its gone, thats how i knew about it from u giga ,strange,.

[Giga]

it is still there, if you follow the link in previous posting. I also have to find out how it works, no do***entation found for it, yet.

[holmroad]

@Giga:
Sorry mate but wasnt having a 'go' at YOU, but the ORIGINAL perpetrator of this file and its new features - something as important (?) as this surely needs some serious explanation?
So YOU are a great guy who obviously tries as hard as the rest of us to fathom things out!
Thanks again for all your recent input, much appreciated!:respect-067:

[Giga]

the c a r d s h a r i n g menu's
S e r v e r L i s t
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/CSserverlist.jpg
When you selected edit:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/CSserveredit.jpg
You have now 6 filters for the C S where you can filter on c a i d and i d e n t:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/CSFilter0.jpg
to
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/CSFilter5.jpg

I'm sure we get further guidance on what we can further discuss on this item or if this was the limit?

[Giga]

@Giga:
Sorry mate but wasnt having a 'go' at YOU, but the ORIGINAL perpetrator of this file and its new features - something as important (?) as this surely needs some serious explanation?
So YOU are a great guy who obviously tries as hard as the rest of us to fathom things out!
Thanks again for all your recent input, much appreciated!:respect-067:
I understood that, your not taking a shot at me. We are all in a gray area regarding these. Thanks to fellow members, I became aware this was arround and had a go at it. Hope you like the new screen captures.

[holmroad]

Cheers mate - only prob is I never WAS very good with the 8281 option, although I did get a few 'feeds' ok - but never very good ones, or for very long!:respect-055:

[Giga]

LNB measurement (4 possible):
select your satelitte (multifeed)
22Khz: OFF Polarization: V: 10.700 ~ 11.700 HHz
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/192Astra1LVLow.jpg

22Khz: ON Polarization: V: 11.700 ~ 12.750 HHz
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/192Astra1LVHigh.jpg

22Khz: OFF Polarization: H: 10.700 ~ 11.700 HHz
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/192Astra1LHLow.jpg

22Khz: ON Polarization: H: 11.700 ~ 12.750 HHz
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/TMmenu/192Astra1LHHigh.jpg

The frequency range displayed is determined by a transponder list of a satelitte/satellite position.

[holmroad]

Thanx for all that mate - maybe you can PM me when you actually get one to work - with the settings etc?:respect-067:

[jblo]

hi

can anyone tell me how to get 8281 to work. I've connected up using a RS3232 cable and then I'm lost. I know I'm thick......alittle help would be appreciated.

Cheers

jblo

[drahcirk]

isthat an ethernet cable mate? and its nought to do with being thick jblo, were all trying to get to grips with this one, i dont know where host is yet ,.,.

[Giga]

protocol used: only N e w c a m d so you need details for that one:
ID = u s e r n a m e or l o g i n
password for that s e r v e r
D E S - K E Y needed to (en/de)c r y p t the trafic. That is all i figured out.
I think you can find additional information here:
Ethernet & Serial Treat (https://www.satpimps.co.uk/showthread.php?t=95126) <= click on there

KEEP in mind forum rules:
...

3) no discussion of any SKY TV hacks , or cable tv hacks , dboxes or any cable equipment whatsoever or of any forums that have that information on them
...
9) NO card share server requests.

Please do not post requests for card sharing servers etc
Any requests will be removed and the ppl involved banned.
Technical discussion on CS is ok
...

[drahcirk]

thanks g, i think i was being a bit naive b4 asking for a fta ser, dont think theres such a thing is there????:biggrinjester:

[jblo]

Hi

Thanks for your help so far. I was using the wrong cable. I now have an ethernet cable from stb to laptop. But still can't get connected. I try connecting and it stays disconnected.

Any further help will be appreciated

cheers

jblo

[Giga]

Menu
Instalation
Motorised Settings
Yellow button
that would be the Satfinder, the Analyzer can be accessed direct while viewing a channel by pressing the green button. Has some other functions available.

[Giga]

Hi

Thanks for your help so far. I was using the wrong cable. I now have an ethernet cable from stb to laptop. But still can't get connected. I try connecting and it stays disconnected.

Any further help will be appreciated

cheers

jblo
If you go from laptop to the stb without passing a router or switch, you should use a crossover cable (https://www.satpimps.co.uk/showthread.php?p=627221) <= read here

[Giga]

if using a router:
DHCP usage (https://www.satpimps.co.uk/showthread.php?p=636256) <= click here
gateway, subnet mask, ... (https://www.satpimps.co.uk/showthread.php?p=636592) <= click here

[johntee50]

Connecting the STB direct to the router via ethernet cable only seems to work on connections number 1 to 4. I've tried several combinations of connections in tne various boxes, but only 1 to 4 seem to connect. The connections from 5 upwards may have to go through a computer, as you said earlier. Still a learning curve on this one. Can't seem to find any info on it anywhere. I'll keep plugging away.

Regards, JT.

[Giga]

could also be for future use?

[johntee50]

Oooohhh ! Now you've got me all sweaty.

Regards, JT.

[RABBY]

On Holiday Tommorrow [ Going to have a crack at this ] Away next week? So i have a few days to play ?? What Channels are open ?When I Put the Details into my Router ? [What happens] ? Open Ports Ect Ect ?Secret service stuff Here ?? Is it a waste of time and Effort:nopity:

Quike taking the info in [ Please help me + Others ] Thanks :respect-048:

[drahcirk]

if i could find out where and what u put into host, might b able to get somewhere,.:toetap05:

[johntee50]

It's awkward to talk about this because part of it is a bit naughty. Technical info on CS seems to be OK, but details of hosts etc. are taboo. If you PM me, I may be able to help you a little.

Pressed the wrong button and said thanks, what a dipstick I am.

Regards, JT.

[RABBY]

johntee50

You can PM ?? Me m8 [ With all you have ] I use to be into CS [ Not Anymore ]:respect-050:

[budd131]

johnty just sent u a pm m8cheers

[budd131]

johnty just pm u again m8

[Giga]

@budd131
users get a message showing there is a PM

[Giga]

When you have the Satfinder open:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/Frequency%20Analizer/003Yellowlockbutton.jpg

some options:
Zoom Green Button opens the AGC search
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/Frequency%20Analizer/001ZoomRange.jpg

after pressing OK you see the signal range from 100 to 255:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/Frequency%20Analizer/002ZoomedTPListappears.jpg

Lock Yellow Button starts locking the frequencies showing up in green bars:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/Frequency%20Analizer/004ZoomedLocking.jpg

When the frequencies are found you can list these by the Blue button:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/Frequency%20Analizer/005TPlistlock.jpg

when using the Info button it tries to find the satellites in your satellite list. (my own satellite list, split out the satellites on each position, easy for measuring and pointing, fixed lnb's)
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/Frequency%20Analizer/006InfoSearchchecking.jpg

found the 1st satellite (Lock), continue search: press the Red button
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/Frequency%20Analizer/007SateliteFindLock.jpg

http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/Frequency%20Analizer/008InfoSearchcontinuing.jpg

If someone has more knowledge on this, please let us know. Perhaps we can make another howto or whatever.

ps.:If you have some other ideas regarding the TM6900HDSuper or TM6800 and require screenshots, let me know, I'm happy to provide these.

[Giga]

drahcirk:

if i could find out where and what u put into host, might b able to get somewhere,.
johntee50:

>8 >8 but details of hosts etc. are taboo >8 >8

now I'm lost? Technical on what menu are we? Don't recall a host field?

[Giga]

http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/scrambled/01Alice.jpg
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/scrambled/02TG24.jpg