nowt open

[drahcirk]

just d/loaded latest tmkeys, but still cant get anything to open, there must be something else im not getting right, :redface:

[echelon]

well , digi tv is open here on a TM1500 and I havent updated my tmsoftcam for a couple of weeks or so

[Giga]

confirmed and checked on 6900HD super with the latest:
https://www.satpimps.co.uk/showthread.php?p=642231
erase the used files on the computer and stick, redownload above and unzip directly to the stick.

[joany]

I have a tm6900hd super combo and haven't updated the firmware for about 5 weeks and the ch's on 1W and 19.2E were still open last night.

shoudl I update the softcams more frequently??

[drahcirk]

in myold phoenix. i had to enter a number in menu to activate the codes ,is there a similar thing with tm?

[eddieaok]

Hello

Type in 2004 on the System Information screen BISS and CAS options appear on the main menu.
Patch is then activated.

[drahcirk]

thanks ed, done that still nothing,.

[teassoc]

I had to load a new softcam last night to get Digi TV on 1 west back last night.

I haven't loaded the latest AU patch so that might explain why had to do that, whilst others hadn't.

[Giga]

not all have the last patch with the analyzer, this one might have A U fixed for d i g i t v
@drahcirk
when you are on one of these channels press [m u t e] [e x i t] and you should be in the right window for the k e y s digits from the remote, A to F on the remote [i n f o] after an alpha use cursor key to move 1 to the right.

[echelon]

if using a patch with au , you do not have to update tmsoftcams UNLESS there is something you need to open that the new tmsoftcam addresses , like rai or mediatech

if you are not using au , or it does not au , always use the latest tmsoftcam , and preferably turn off digi tv au in menu options , if the patch has it , if it doesnt have au , then you need the tmsoftcam anyway

personally I havent bothered with any latest patches so I always update the tmsoftcam as and when I need it , usually for digi tv

my digi tv hasnt altered at all in the last 2 weeks , so I am using the tmsoftcam from 23 august 2009 , but I would advise people use the latest tmsoftcam as it always has the working keys in it

frankly , it could not be easier

[KnockJohn]

I have a tm6900hd super combo and haven't updated the firmware for about 5 weeks and the ch's on 1W and 19.2E were still open last night.



What's open on 19.2?



nowt open
just d/loaded latest tmkeys, but still cant get anything to open, there must be something else im not getting right,

I noticed that RAI, Mezzo & Equidia would not open on the latest patch, so went back to 679p

[drahcirk]

wish i had ur brain ech, a useful thing mate,.:coolgleamA:

[echelon]

wish i had ur brain ech, a useful thing mate,.:coolgleamA:

so have you sorted it out yet ?

new tmsoftcam just posted by compass , and you can always try earlier patches as has been suggested

[^^COMPASS^^]

drahcirk,

When you do the following,

Menu>
System Information>
2004>
Does the CAS & BISS menu appear ? (if not please repeat the process)

Also

Menu>
System Information>


Model : ?
S/W Version : ?
H/W Version : ?
Boot Version : ?
CH Version : ?

This will Help us to help you


Regards...

[drahcirk]

thanks, yes cas menu biss menu showing.

model, tm69+super,
s/w 6.87p july 28.09,
h/w 1.00,
boot. 1.10,
ch f012 +st0001

[Giga]

could not agree more.

[^^COMPASS^^]

thanks, yes cas menu biss menu showing.

model, tm69+super,
s/w 6.87p july 28.09,
h/w 1.00,
boot. 1.10,
ch f012 +st0001

Ok thanks

when you enter


Menu>
System information>
Cas>

Are the Key edit boxes turned on or off ? (Eg Box 1,2,3,should show encryption Seca, Irdeto, Etc...)
------------------------------------------------------

Please also see if DigiTv AU is set to on


Menu>
Options>
DigiTv AU is OFF, (Set this to on)
Exit (settings were changed.
Do you want to save )
Yes>
Exit>
Exit.



Regards...

[drahcirk]

thanks compass, that was all as u stated, so shud get something now,very helpful, thanks for ur time,.:svengo:

[Giga]

when you select the channel, does the info shows the green % in the info?
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/Goodreception.jpg

[drahcirk]

yes it does,.

[Giga]

This mean you get a good signal.
Lets try another thing:
Pid Search
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/01PidSearch.jpg
In the Pid Search Menu
select the satellite on position 1°W with the remote cursor.
then select the transponder frequentie: 12608
then select polarization: H
you should now have the Yellow and Blue bar showing as in this picture:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/02PidSearchScan.jpg
if this is the case press the Red button
it should now find the stations for that transponder:
D i g i F i l m 1 & and so on
it will finish and save this and show the D i g i T V I n f o test screen
if you select D i g i F i l m 1 is it now open or still scrambled?

[albondi]

Hi All

I have loaded the latest with same set up as drahcirk
model, tm69+super,
s/w 6.87p july 28.09,
h/w 1.00,
boot. 1.10,
ch f012 +st0001

I to have blank screen ,the only way to check for me if au is on is go to
Menu
options
there you can change but is already on au ,have now taking if off to see what happens.
Al

[Giga]

download the latest softcam unzip to the usb stick (remove the old file 1st of the stick)

form the main menu select USB menu: Data Transfer:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/01USBmenu.jpg
when you have more then 1 usb storage device select the last one added (1 in this case: stick, harddisc is 0 was there)
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/02SelecttheUSBmemorykey.jpg
after sometime it will show the T M s o f t c a m . k e y and as this is the only file on the stick it should be selected.
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/03softcamkey.jpg
don't press any of the colored keys: press OK
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/04PressOK.jpg
the process starts and finishes:
http://i654.photobucket.com/albums/uu270/Jan_Gruuthuse/05Downloaded.jpg

[tony52]

In the new patch on the TM 6900 Super+ its a problem whit the RAI channels and also whit the Ethernet cable attached to the receiver cause the TM to re-booting itself until cable gets disconnected. So i installed the old patch 679p and now works ok.

[Giga]

RAI 1,2,3 are FTA on 13°E hotbird
the resetting of the TM6900HDSuper has been solved:
i finally got it working. well what i did was (https://www.satpimps.co.uk/showthread.php?p=640796) <= click here
If you want to read the whole story:
receiver keeps reseting (https://www.satpimps.co.uk/showthread.php?p=640712) <= click here

[drahcirk]

i can now see two things i was doing wrong b4, havent got sight of 1west , and also think i was trying to get neds,and prob the keys had expired, have now ,cleared the usb stick, and loaded fresh,.terrific help from all ,very grateful ,:respect-061:

[FOX]

Hi,

me too I got a new TM6900 box an uploaded the patch and softcam as indicated by Giga. no success. I am trying it on Film1.1 canal digital 19.2. Looking at the CAS cannot see canal digital

[^^COMPASS^^]

Hi,

me too I got a new TM6900 box an uploaded the patch and softcam as indicated by Giga. no success. I am trying it on Film1.1 canal digital 19.2. Looking at the CAS cannot see canal digital


Canal Digitaal on 19E isn't open via TM-Patches (you need a Diablo or a G@mma card for this package)


Canal Digital on 1 west isn't open


However Digi Tv on 1 west is open with either AU or sending TM-Softcams.

Regards...

[drahcirk]

thanks compass, dont think neds working on g,mma at moment,.

[^^COMPASS^^]

thanks compass, dont think neds working on g,mma at moment,.

Yes it is,
just takes up to one hour two update on Film1.1

after you receive the first update AU works quickly for C+NL


Regards...

[drahcirk]

thats a bit annoying, i loaded nova on and lost the file?

[^^COMPASS^^]

thats a bit annoying, i loaded nova on and lost the file?

If you need the C+NL File it's here : https://www.satpimps.co.uk/showthread.php?p=642702#post64270 2

Best suggestion is to programme your card with C+NL file
and let it update over night

[drahcirk]

wont let me download it, says unknown comment format, one thing after another,.]

[^^COMPASS^^]

wont let me download it, says unknown comment format, one thing after another,.]

Ok use the same link ive added it in zip format :respect-048:

[FOX]

Compass, you mention that C+NL on 19 need a diablo cam. Any channel to check on 19.2 and 13 whether any of the Keys on TM works

Many thanks

[^^COMPASS^^]

Compass, you mention that C+NL on 19 need a diablo cam. Any channel to check on 19.2 and 13 whether any of the Keys on TM works

Many thanks

Hotbird 13E
TV Globo
11.585
V
27500

Regards...

[FOX]

Compass,

TV Globo doesn't clear using TMsoftcam above in this thread from Giga.
Thanks

[^^COMPASS^^]

Compass,

TV Globo doesn't clear using TMsoftcam above in this thread from Giga.
Thanks

TV Globo Key 00 is expired in that softcam

==========================

Here use the one i updated

https://www.satpimps.co.uk/showthread.php?t=63673

Tv Globo should be ok

Regards...

[FOX]

It does work now. Any additional channel we can get on 13 and 19.2.

Thanks

[Giga]

Compass,

TV Globo doesn't clear using TMsoftcam above in this thread from Giga.
Thanks
was 1°W try to solve issue: lattest is there:
https://www.satpimps.co.uk/showthread.php?p=642511 <= click here

[^^COMPASS^^]

It does work now. Any additional channel we can get on 13 and 19.2.

Thanks

19.2E ASTRA1 Only viewable channels are Fta

Hotbird 13E,

Rai 1,2,3,4,


10992
V
27500


11766
V
27500


Mezzo

12245
H
27500

Jetix Russia

10723
H
29900

Equdia

12380
V
27500


Regards...

[kim1]

kim1
I have been reading this thread and bought my self a stick
and updated firmware also installed soft cam
got digi to work on Thor after all this time messing about with
underworld a big thank you TO COMPASS