Ccam again

[stevenalis]

Okay I have had my box for just over a week now and I am having problems getting CCAM to work. Leaving aside the sharing issues I am merely trying to use it watch channels such as DIGI TV.

I have followed the various turorials but so far no luck.

Can someone who knows what they are doing as clearly I don't (although I thought I did!!) check over what I've done so far:-

1. Downloaded CCAM 2.2.1 and extracted it as described.
2. Connected PC with Filezilla and then entered the /EMU directory and transfered the lib directory. I then clicked on file permissions and made sure all files in lib are 755.
3. Opened OpenXCAS folder on AzBox HD receiver and transferred two files : module.seq and openxcas.conf . I then clicked on file permissions and made sure the two files 755.
4. Transferred into /EMU/OpenXCAS/dvbapiCAS 3 files : dvbapi.sh , dvbapi_module and openxcas.conf . I then clicked on file permissions and made sure the three files 755.
5. Put the latest key files (constant.cw, softcam.key,autoroll.key) into the dvbapiCAS directory. Set their attributes to 644 using file permission. I also put these keys into the /var/keys as well as not sure where to put them exactly.
6. Activated the dvbapiCAS as the cam and rebooted.
7. I do not have a C or N line so I haven't done anything with the ccam.cfg file.

Questions are:-

(a) Nothing clears so what have I done wrong?

(b) Which is the correct directory for the keys and do I have all the files I need.

(c) Does the getkeys plugin get the correct keys for CCAM?

(d) I understand I can use CCAM without the C or N lines in ccam.cfg is that right??

Never had these problems with my old TM6900!!


Steve

[xanadu]

You need to edit your cccam.config file in the EMU\LIB directory.



Add these lines

SOFTKEY FILE : /EMU/lib/SoftCam.Key
AUTOROLL FILE : /EMU/lib/AutoRoll.Key



Don't forget to place your softcam.key file in the lib directory.

[stevenalis]

Okay I now appear to be working.

I actually created a var/key directory. I repointed the cfg file to that directory. All working. Thanks

[goran]

/var is reset at reboot...

All in AZbox HD goes to a single relevant EMU folder - as a principle.

For CCcam - as it is a bit specially made - into the /libs folder...

If you ask a Q, my advice would be to listen to the advice given - like Xanadu's!!!

[satzzz]

Im having similar probs here.I ca see the following:

Welcome to CCcam 2.1.1 server


Current time 00:04:50
NodeID: 7cd5f963da3050b9
Uptime: 00d 00:04:09
Connected clients: 0
Active clients: 0
Total handled client ecm's: 0
Total handled client emm's: 0
Peak load (max queued requests per workerthread):


but have no active clients.I've pasted my c lines(EDITED HERE) as asked and altered the locations within the azbox (see below)but still nothing will clear

#DVB API: -1
################################# ################################# ##
# CCCAM 2.09 #
################################# ################################# ##

C: ********************************* ***** { 0:0:2 }
C: ********************************* *****{ 0:0:2 }

################################# ################################# ##


################################# ################################# ##
SOFTKEY FILE : /EMU/lib/SoftCam.Key
AUTOROLL FILE : /EMU/lib/AutoRoll.Key
CAID PRIO FILE : /EMU/lib/CCcam.prio
PROVIDERINFO FILE : /EMU/lib/CCcam.providers
CHANNELINFO FILE : /EMU/lib/CCcam.channelinfo

################################# ################################# ####
# Other config settings #
################################# ################################# ####

Just one confimatin please.On activating the dvbapiCAS with the activation and priority does the # mean its active or deactivated??

[Carp95]

Deactivated

[satzzz]

Thanks,I thought so.Everything seems setup correctly then.Gawd knows whats up with it.

[Carp95]

What does the server tab say?
And the shares tab

[satlubitel]

Hi all,

Could someone tell me where I can find latest key files (constant.cw, softcam.key,autoroll.key)?
Also for which Satelites key files are available? Is there softcam.key and autoroll.key for all satelites?
Any explanation are appreciated

[goran]

Minicat's forum. Redbull and co. are making them...

Apparently, the CS is cut off if keys are "on".

True? I haven't yet tested it...

Keys go to lib folder.

[Carp95]

Minicat's forum. Redbull and co. are making them...

Apparently, the CS is cut off if keys are "on".

True? I haven't yet tested it...

Keys go to lib folder.

Well thats through sometimes, if you have "dead" keys for a provider in your softcam.key CCcam will not search in CS.

Butt CS isn't cut off completely just for the CAID's that are in the SOFTCAM.KEY file all others will work with CS.

That has always been the case with CCcam and the reason why I never use key files with CCcam ( most off them are "dead" anyway)

[satzzz]

Server tab(server blanked out):

Welcome to CCcam 2.1.1 server

Server connections: 2
+-----------------------+------------+---------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+-----------------------+------------+---------+--------+----------------+-------+-------------------------------+
|*************:1212 | |CCcam-s2s| | | 0 | |
|*************:22100 | |CCcam-s2s| | | 0 | |
+-----------------------+------------+---------+--------+----------------+-------+-------------------------------+


Share Tab:

Welcome to CCcam 2.1.1 server

Available shares: 0

+----------------------+--------+----+-------+----------+-------+-------+
| Host | Type |Caid| System| Providers|Uphops | Nodes |
| | | | | |Maxdown| |
+----------------------+--------+----+-------+----------+-------+-------+
+----------------------+--------+----+-------+----------+-------+-------+

As you can see nothing is being shared.Just to add all is running smooth on my TM9100

[valerica]

NodID = 0 , means server is down and/or yr C line (in CCam.cfg) is wrong (different from F line in the server) .

Cheers ,
Val .

[satzzz]

Strange as all is working on my TM9100 now with the same clines so im unsure how the server can be down?

[satzzz]

Ok,getting somewhere now but not unscrambling.Here's the info now:

Server connections: 2
+-----------------------+------------+---------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+-----------------------+------------+---------+--------+----------------+-------+-------------------------------+
|*************:1212 | |CCcam-s2s| | | 0 | |
|*************:22100 |00d 00:01:40|CCcam-s2s|2.0.11 |25a2139d1075ac28| 0 | |
+-----------------------+------------+---------+--------+----------------+-------+-------------------------------+



Available shares: 51

+----------------------+---------+----+-----------+------------------------------------------+-------+-----------------------------------------+
| Host | Type |Caid| System | Providers |Uphops | Nodes |
| | | | | |Maxdown| |
+----------------------+---------+----+-----------+------------------------------------------+-------+-----------------------------------------+
|*************:22100|CCcam-s2s| 100|seca |5211,5221,5225 |2 0 |25a2139d1075ac28,3b3cf9bb73e919f 7_8 |

etc etc etc

So I now get a picture then don't.It does seem very hit and miss.I', using the Cccam 2.1.1 method.Is there anything more stable yet.As is unwatchable

[Dig Deep]

Well, it should work good. A few freezes now and then but no real problem.

I tested it in my lan only so, perhaps, there are some problem is the waiting time is too long but still, it should work.

Try to clear out all, new FW and re-install the set.

[valerica]

Try 2 ping the server ; it shouldn't b any #request timed out" & echo time less than 500 ms 4 n*d*s card to allow uninterrupted view .

Cheers ,
Val .

[satzzz]

All seems fine now.I stuck the cfg file on from my TM9100,instead of the original with my clines added.

[Dig Deep]

Good to hear that You are sorted.

One must remember that the AZ is still in Beta. I am sure we will soon see the real thing !:respect-050: :respect-050:

[satzzz]

I must admit.I do personally enjoy the challenge but I needed to get this sorted as a mate purchased this box before me.Normally i'd have had months of playing with a box before anyone else around me.
At least when I get mine i'll know what to do.
I am looking forward to new firmware for box the Sat side of things and the streaming(popcornhour) side.
It does have a lot of promise.
Thanks to all.