Mbox local card Azbox Elite

[sami8519]

Hi,

Anybody please tell me how to make MBOX reads my local irdeto card using my azbox elite HD? I need to share the card on the net.

Thanks.

[goran]

Use NewCS for the reading bit [server].

Do a search here and on the net...;)

Good luck!!!!:cheers2:

And do tell!!

Please! ;)

[sami8519]

So you mean mbox cant read the card directly from the azbox internal card slot?

[goran]

It can read some cards. Not all - yet!

Do try, please - and tell...

You have the cfg files...

Good luck! ;):coolgleamA:

[sami8519]

I am trying but so far did not work for me.

[BE-COOL]

Mbox for azbox doesn't read any local card, you must use newcs, newcs 1.20 rc13 for the internal reader, or you can use the 1.67 rc1 if you use an external card reader.

[goran]

I have to say, ON THE LEVEL OF PRINCIPLES, I absolutely HATE it when people say "It doesn't work!" and they do not say ANYTHING about what they did...

And then, by default, they expect us to start writing EVERYTHING from scratch - when they themselves hate doing ANY of it... RIDICULOUS!!!!!!!!!!!:banghead::b anghead::banghead:

So, here is the config file... What of it did you read, understood and did?!?


//V: { card_type | device number | clock | inverse_Reset | inverse_CD_Line | detect card over CTS | DM800/8000 | dbox }
#V: { 3 1 3571200 0 0 0 0 0 } // external reader example -> Seca card, com1 port, clock 3.57 Mhz,
#V: { 3 2 3571200 1 0 0 0 0 }
#V: { 3 3 1 0 0 0 0 0 } // dreambox example -> Seca card,sci0 slot,3.33 Mhz


// [card_type]:
// Seca 3
// Irdeto 4
// Conax 5
// Cryptoworks 6
// Viaccess 7
// NDS 8
// Nagravision 9



// [device number]:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10
// /dev/scard0 11 //azbox
// /dev/scard1 12 //azbox



//[clocks]
//for COM ports and external card readers in Hz!!!

//for SCI DreamBox slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz

//[Inverse Reset]
// 1 -yes
// 0 -no
//for GPIO
//2-gpio1
//3-gpio2
//4-gpio3
//5-gpio4
//6-gpio5
//7-gpio6
//8-gpio7


//[Inverse CD Line Detection]
//1 - yes
//0 - no

//[Detect card over CTS signal]
//1 - yes
//0 - no

//[DM800/8000 box]
//1 - yes
//0 - no


//[dbox serial/multicam]
//1 - yes
//0 - no

/********************************* ********************************* ********************************* *********************/


#J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled

/********************************* ********************************* ********************************* *********************/

#S: { COM1 115200 }
//S option -> enable sssp protocol
//S: { x baud }
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1
//x= serial device ...
//valids baud -> 115200,57600,38400,19200,9600

What does your V line look like?

Have you used the internal reader or external, Phoenix mode reader?

[goran]

Mbox for azbox doesn't read any local card, you must use newcs, newcs 1.20 rc13 for the internal reader, or you can use the 1.67 rc1 if you use an external card reader.

It does read but does not pass on the EMMs, it seems...

For that, you are right, we need the NewCS or so... ;)

[sami8519]

Why you are so angry goran mate? relax. When it works i will post how it worked for me. The point of this topic is that if one already made it, so he can help all of us.

[hfmls]

mbox local cards direct doesn't work!!! in azbox hd. they boot, but they won't open channels, it's broken.

it does work in other boxs, but in azbox hd it's broken, mower forgot to fix that in latest version. we hope that in 0011 should be fixed. nothing dificult.

[goran]

irdeto card

Some of it, like Viaccess HRT, works, I was told... but not as a server and no EMM... meaning, one must use something else to update the card... In Irdeto, where changes are fast, it's useless, for now, as you were told...


mower forgot to fix that in latest version. we hope that in 0011 should be fixed. nothing dificult

Hmmm, maybe. I hope you are right. But when I spoke to him he was thinking of getting the data from MultiCAS, for instance, and passing it on... So, I don't think it's that easy... I wish I am wrong on this one!:respect-062:

Is it really "[all] working in other receivers"?


Why you are so angry goran mate?

Not angry but disappointed...:toetap05: Why? Well...

Some of us are trying kinda hard to help, so we describe almost everything in detail:respect-011: -> take a hint and do something similar, if you want a proper "helping hand"... It can be done - but we need the data!!!:smash:

I keep getting these PMs: "I did it like you wrote but it doesn't work. What have I done wrong", they write, word for word... I keep saying "How do I know?!?:svengo: Was I there?:confused: Did you tell me what you were doing?" :banghead:

Nuts...:rolleyes:

[hfmls]

hehe i don't know if it is all! :) but seca and such work in other receivers, direct reading, not in azbox hd. not azbox hd problem, but mbox.
let's see what we'll have this week from mower.

[hfmls]

ohh...how i would like sbox+mbox merged :)

[rtificial]

So, the week has passed. Is there really going to be an Mbov 0.6b11 with improvents for azbox?

Currently I use it with NewCS 1.20rc13 to read the internal card, but this NewCS version somehow hangs after a while (1 of the newcs processes > 50% processor capacity, not responding any longer).

So I would be very happy to see some improvement somewhere in card-reading.

[hfmls]

well...mower isn't around yet...too bad.


where can i find newcs admin?
we need a newcs optimized for azbox hd, i wanted to talk to them