Tuner priority...

[psykix]

Ok, so I ordered a Spaun diseqc switch, as they seem to be considered the best.

At the moment, I have 1 x feed from motorised dish in Tuner A, and 1 x feed from my fixed sky dish in Tuner B.

When something records, it uses Tuner A, how do I get it to always use Tuner B wherever possible?

I noticed a priority setting on the tuner setup, but not for the motorised one.. Not sure what it would need to be set to though...

Ta!

[shirehorse99]

Hi
i have the same setup as you motorised on tuner a and sky dish on tuner b - but every time i record from 28.2 it always chooses tuner b.

How is your tuner b set u p?

on Nabilosat 0.11 my set up

press menu
setup
service searching
tuner configuration
cursor down to tuner b press ok

my settings are

config mode - simple
mode - single
satellite - astra 28.2
send diseqc - no

hope it helps

[psykix]

Hmm.. I have mine set to advanced rather than simple...

I'll try changing it...

Sometimes it records on tuner B, and other times it chooses tuner A!!!

I'll try with config mode - simple...

[Quailman]

It would be useful if there was a plug-in or a setting to select which tuner to use for recording.

Tuner A = advanced = Motor + fixed 28.2e + fixed 19.2e

Tuner B = Simple = fixed 28.2e + fixed 19.2e

It alway use´s tuner b to watch 28.2 + 19.2 and records on tuner A which stops me being albe to use my motor.