Help needed with mpcs

[Keano]

Guys its not often I'm stuck but after 3 nights of trying I need help.

I have a official Polsat card and I have RSA and BK.

Now with newcs card reads perfect and I can watch channels using mgcamd.

Now I want to use CCcam and I know ( I've tried also ) that you can't just use a N line to newcs with Polsat cards because it wont work.

You have to use mpcs, so you have newcs - mpcs - CCcam.

I thought I did everything right but chanels still will not clear. Whats makes it worse is that CCcam info in browser shows camd3 connected to my nagra card. The problem when I look though in newcs info is that mpcs is not connected to newcs.

If i'm right in thinking the info for connecting to newcs is done in mpcs.server.
I have looked but can't see what is wrong.

Here is log when I start mpcs via telnet

2009/08/21 21:02:30 250 s **** STREAMBOARD << mp-cardserver started
2009/08/21 21:02:30 250 s auth size=4640
2009/08/21 21:02:30 250 s services reloaded: 0 services freed, 3 services loaded
2009/08/21 21:02:30 250 s userdb reloaded: 0 accounts freed, 1 accounts loaded
2009/08/21 21:02:30 250 s signal handling initialized (type=sysv)
2009/08/21 21:02:30 250 s 2277 service-id's loaded
2009/08/21 21:02:30 250 s 22 lengths for caid guessing loaded
2009/08/21 21:02:30 250 s monitor: disabled
2009/08/21 21:02:30 250 s camd 3.3x: disabled
2009/08/21 21:02:30 250 s camd 3.5x: initialized (fd=6, port=15000)
2009/08/21 21:02:30 250 s cs378x: disabled
2009/08/21 21:02:30 250 s newcamd: disabled
2009/08/21 21:02:30 250 s radegast: disabled
2009/08/21 21:02:30 250 s resolver thread started
2009/08/21 21:02:30 250 s logger started (pid=252)
2009/08/21 21:02:30 250 s resolver started (pid=253, delay=30 sec)
2009/08/21 21:02:30 250 s proxy started (pid=254, server=127.0.0.1)
2009/08/21 21:02:30 250 s anti cascading disabled
2009/08/21 21:02:30 254 p02 proxy 127.0.0.1:22901 newcamd525 (fd=4)


22901 being port in newcs.xml

camd 3.5x port 15000 is in CCcam server in L line

CCcam.cfg is

L: 127.0.0.1 15000 dummy dummy 1801 007101

dummy being the password in mpcs.user.

Anyone help please ?

Ta

[sonic1]

I am probably way off the mark keano but have you tested the N line in your CCcam.cfg using stealth ?

I was not aware you needed mpcs.

Please correct me and give as much detail as you can.

[Keano]

Tried it and I have just tried again.

CCcam_2.1.2 using stealth mode and logs in OK, comes up in newcs log as mgcamd login so everything OK there but pictures all black.

In CCcam info it shows nagra card under servers but no ECMs sent to card at all.

[sonic1]

Without doubt you need newcs - mpcs - CCcam.

It also seems that CCcam 2.0.4 is the only version that works.

[minimal101]

hi

is not true only CCcam 2.0.4 work with polsat card.

u can read polish?..acording to *ttp://mpcs.wikidot.com/..u can configure u polsat card easy even on N: line

regards and good luck!

[sonic1]

How did you sort it m8 ? :respect-051: