how to install?

[paul01609]

how do i install terrormans script ?this box has now been sat for some time with no use i have tried install it befor but had bo luck many thx

[goran]

Do this [I guarantee i will work!!!], m8:


Native (Dreambox) CCcam – hacked for AZbox HD


The full CCcam for DreamBox [server, re-share and all] is ready to be used in AZbox HD, guys...The development will go on, no doubt but for now we have the privilege to test the first version, thanx to a few guys who figured out how to make it all "compatible"... Please, download the file from here:

Originally Posted by kanber_kav on Satpimps forum
http://www.mediafire.com/?izmdrz2qlnm - cccam file and script More info is here: https://www.satpimps.co.uk/showthread.php?t=112731 (https://www.satpimps.co.uk/showthread.php?t=112731)

I bet there are some non-IT people on this forum, who are not too familiar with Linux etc. I bet a few will need some simple, straight-forward, detailed and more or less step-by-step advice, how to use the complete package that Kanber_Kav put up... So, here is how I did it...

Following The_Ripper's great work and advice, I used K_K's version of T_R's files, and I installed the package like so:

I downloaded cccam-azbox-2.1.1 [= "emu.rar"] archive from K_K's post.

I decompressed it by right clicking on it [7zip -> Extract here]. I got EMU folder and 2 sub-folders:

-libs
-OpenXCAS

I went into the libs folder and edited CCcam.cfg to put the details of my peer's server, as advised in the file itself [added this line under #C: line in the file]:

C: peer.DynDNS.something port username password I went into OpenXCAS folder and edited the following files [in order to make them correspond to what I have in my AZbox HD, so you need to do the same in accordance with your setup]:

-module.seq [this one is a must]
dvbapiCAS
#MboxCAS
#mgcamd
#MultiCAS
#newcs
#SCDXCas -openxcas.conf [I am told this one isn't a must but I did it anyway...]
[modules]
count = 5
active_auto = true
active_1 = dvbapiCAS
active_2 = MboxCAS
active_3 = MultiCAS
active_4 = mgcamd
active_5 = newcs

[module_1]
name = dvbapiCAS
path = EMU/OpenXCAS/dvbapiCAS
daemon = emu_module
version = 0.1

[module_2]
ap= Yes
name = MboxCAS
daemon = mbox_module
wait=13 sec
version = 0.6_10

[module_3]
name = MultiCAS
daemon = emu_module
version = 1.57D-4T11-6B

[module_4]
name = mgcamd
daemon = mgcamd
version = 1.32
# argument = -a 3

[module_5]
name = newcs
daemon = newcs
argument = -nd
version = 1.6
xcasapi = FALSE I used FileZilla Client to FTP it to my AZbox HD receiver and copied the lib folder into the folder EMU, then went into it and gave rights, i.e. CHMOD -> 755 to all the files inside.

Then, I copied the content of the OpenXCAS folder from my HDD into the AZbox HD OpenXCAS folder. I went into the folder itself and gave CHMOD to 755to the module and .sh file.

I didn't even have to reboot: I just restarted all the EMUs [via the Fast Forward button -> yellow button -> OK], then the dvbapiCAS with the OK button -> OK. It worked!


How to control CCcam!


This is how you can see your CCcam details, like who's your server, what s/he has on it, who's your client etc. etc. In your browser's address box put in: http://192.168.x.x:16001 (http://192.168.x.x:16001/) – where „x“ = your AZbox HD's IP address. :respect-062: