The_Ripper: Azbox and CCcam

[sami8519]

I have an original Showtime card on 7w and I am sharing the card via a linux PC server, but When I want to watch via Azbox using CCC, the emu cant decode the channels at all, and when I use CCcam 2.1.1, I can watch for 3-4 minutes then the emu stops asking for ECM. Please the ripper fix this problem with irdeto channels.:o15:

[hanswurscht]

Ripper isnt there for Month, he has a Real Life and there are some Restrictions, so noone can help you, maybe for next Month

[Taykun]

he is in army

[Dig Deep]

Yeah, that is Real Life :respect-001:


Try Mbox !

[colla]

mbox is also coded by him ;)

[pero22]

On azbox only mbox works fine enithing else not worth a dime.

[Big Al]

Hi m8
is the showtoime card a new one ? if it is as far as I am aware they cant be read yet. if it is an older card, there is an additon you can add into the CCcam file that enables the card to be read, I found it by searching the via google. I had the same problem in Cyprus for a m8, who wanted to share his Showtime card via his DB 500s, its working fine now
Al

[genius74]

I have an original Showtime card on 7w and I am sharing the card via a linux PC server, but When I want to watch via Azbox using CCC, the emu cant decode the channels at all, and when I use CCcam 2.1.1, I can watch for 3-4 minutes then the emu stops asking for ECM. Please the ripper fix this problem with irdeto channels.

The real problem is the dvbapi and not the cccam 1.1.1.

[sami8519]

yes it is a new one. The card is placed in a debian linux PC server running CCcam 2.1.2 and all my peers can watch without problem. But I cant watch anything because both CCC 2.0 and native CCcam dont work very good.

[pr2]

I have an original Showtime card on 7w and I am sharing the card via a linux PC server, but When I want to watch via Azbox using CCC, the emu cant decode the channels at all, and when I use CCcam 2.1.1, I can watch for 3-4 minutes then the emu stops asking for ECM. Please the ripper fix this problem with irdeto channels.:o15:

Hello,

On your server simply place a CCcam.prio file that will give Priority to the provider you have on your card (and may be ignore the other one if Showtime is using simulcrypt).

You will see this will realy help CCC to decode channels.

You cannot set a CCam.prio in CCC so placing it on the server is the solution.

Pr2

[snakie]

priority is not working on servers, only on client side.
and you cant prio irdeto because it doesnt have provider (usually is 00 but in ecm header the assign is done on other providers )

[Carp95]

priority is not working on servers, only on client side.
and you cant prio irdeto because it doesnt have provider (usually is 00 but in ecm header the assign is done on other providers )

Thats not through every provider has a CAID just use that one.
But indeed it only works on client.

So if showtime is 0604 then it's:

P: 0604 #nothing more

[snakie]

Thats not through every provider has a CAID just use that one.
But indeed it only works on client.

So if showtime is 0604 then it's:

P: 0604 #nothing more

Priority was made to prio the encryption the client wants to use first - second - third , in case there is simulcrypt, meaning that more than 1 encryptions are used on a single channel.Alternative is used for channels that have 1 encryption ( same caid , like viaccess 0500 ) but many providers , like the multivisions used to be.

On the server side, the shares selection is done semi-automatic by the internal selection algo based on node.id - ping - uphops - protocol used.
The only way to prio on server side is to have only the necessary shares from every peer and not using like 100s of cards.

On irdeto channels, like showtime,there is 1 caid , you cant prio 1 caid when its only 1 caid.
For irdeto only chid can be prio, but the guys from CCcam team are to stuborn to fix it and add manually entries in config, so they use their autoselection after hammering the cards with ecm`s not needed.

[sami8519]

It may deserve mentioning that after I installed CCcam 2.0.4 on my Azbox, now I can watch my Showtime subscription without freezing. Yes the channels may not send ecm if I put on it for the first time but zapping between the channels solves this issue. I just hope The_Ripper improve the CCcam client because it cant open my subscription even though it send ECM non-stop.

[psygnosis]

Does this mean new version or CCCAM or maybe just maybe can we deam a new firmware.

[crazy2]

impatiently waiting

[sami8519]

NeotionBox raised my Adrenaline now. Thanks for the info mate.

[dveras]

Wait for a weekend :) Probably sunda ;)

Great news! :bravo-009:
Hope to arrive soon and works like Dreambox...

[nakata]

Firmware 0.9.3281 ChangeLog (BETA)
# FIXED
========

- Records of HD-Channel are freezing about all 10 Seconds. Tone also is less.
Often this is also at recording from SD-Channe

- When playing recorded contents on movie player, "Unsupported format" window is popup, to infinity

- Subtitles are fail on following channels
TP 10892Mhz 27500 SID 4801 V160 A80 // CANAL+
TP 10892Mhz 27500 SID 4802 V161 A84 // CANAL+ FILM
TP 10892Mhz 27500 SID 4805 V164 A96 // Ale Kino!

- Channel scanning of DVB-T/C NIT is not working

- When playing some MOV contents, STB hangs up

- SmartCard is sometimes reset

- From the EPG pressing OK and then select PLAY to zap to a channel totally block the AZbox
(when the program is currentely broadcasting)

- In manual time setting, GMT is not effective

- Inaccurate synchronization of subtitles on Astra 28.2E

- Invalid screen capture on 4:2:2 feeds

# ADDED
========

- Added "subtitle off" option in setting

- Added "audio default" option in setting

- Freesat EPG is supported

- Screen capture on movie player

- At setting menu, more options for audio are created, like:
DTS: PCM <--> RAW
AC3: PCM <--> RAW
AAC: PCM <--> RAW
Others: PCM <--> RAW

Best Regards,
The OpenSAT/AZBox Team

[Taykun]

Wait for a weekend :) Probably sunda ;)

hope you are right. We are waiting for new mbox, for fixed mbox on azbox and for fixed cccam. Kinda alot of work for one man. There should be a team behind all these projects.

[sami8519]

Any news about a new version of CCcam for the Azbox?

[dveras]

Wait for a weekend :) Probably sunda ;)

Do you know anything? 2 week passed

[hanswurscht]

which Sunday?
Noone told, so maybe on Christmas something going on(or not)
All AZHD seems to be dead, no activity, no mbox, no cccam, no firmware, its a second Argus I think.

[fanoSat]

IMHO there will be "official beta release" anymore but only leaked version... that aren't really leaked :smash:

I hope to see the new CCam soon, indeed with smartcard reading functionality maybe :respect-054:

[13x025]

Wait for a weekend :) Probably sunda ;)

although it seemed like he was replying to sami8159's post, I think he was referring to the leaked (0.9.3281) firmware. NeotionBox wasn't talking about new versions of cccam... was he?

IMHO cccam (native 2.1.1) is working far more reliably with this leaked firmware... :cool:

[hanswurscht]

and record is working ? :)

[xanadu]

and record is working ? :)

No. :smash:

[dveras]

No. :smash:

So, no recording posible, not working 100% only 80%? hope to arrive 100% quickly. :bowing-036:

[humaxarie]

Recording not possible with ccc...
but with other no problem...i'm glad, i've a legal subscription :)
and why in heaven you would record with ccc...there are so many channels, you don't have the time to watch recorded stuff...
LOL
But people be patient, here in holland we have a saying, no news is good news.
I think we'll be surprised soon....