Still cannot update my jsc card [Archive]

View Full Version : Still cannot update my jsc card

martin83

05-09-2009, 07:10 AM

I have always used CCcam and never tried any other cam before. I am using Gemini 4.6 as an image. I read several times every post of the other two threads and realised that only mgcamd + newcs can work for the upgrade.

I have a working jsc card (viaccess) which I want to upgrade to get the other 4 channels. I received the second confirmation email from adm on Thu, Sep 3 at 4:57 PM. After that, I downloaded mgcam 1.31 + newcs 1.65 but don't know if I have to configure anything using DCC after the download. My card works for the first 4 channels using mgcam but hasn't upgraded after 2 days. Can anybody help me please?

After downloading mgcam + newcs should I do any configuration?

sonic1

05-09-2009, 08:07 AM

Post your newcs.xml mg_cfg and newcamd.list
newcs.xml is in var/tuxbox/config and the other two are in var/keys

martin83

05-09-2009, 08:16 AM

I have looked for them but they are not there !!!!!! :eek: I just downloaded the cam using gemini but did not do anything after that except for waiting. Have no idea how mgcamd works... never used it before.

sonic1

05-09-2009, 08:25 AM

Then you need to download mgcamd cfg and newcs.xml which you can do via the blue button.
Have you downloaded newcs bin file also ?

martin83

05-09-2009, 08:31 AM

Ok I downloaded everything and can see them using DCC.

sonic1

05-09-2009, 08:32 AM

You may need to make some changes but first of all see if you can use the current set up to view your card.

martin83

05-09-2009, 08:34 AM

Yes card is ok for first 4 channels.

sonic1

05-09-2009, 08:42 AM

It's not the best tool but you can use DCC to make some changes if needed.
mg_cfg make sure you have au set correctly and also do the same with the user in the newcs.xml

martin83

05-09-2009, 08:47 AM

It's not the best tool but you can use DCC to make some changes if needed.
mg_cfg make sure you have au set correctly and also do the same with the user in the newcs.xml

au is on in both files now. Do I have to enter my dreambox lan ip anywhere? I just need this to work only for the upgrade cause then I ll change back to cccam.

sonic1

05-09-2009, 08:55 AM

That should be it, just wait for the update now :respect-051:

martin83

05-09-2009, 01:10 PM

This is so frustrating.............No update yet. Strangely mgcamd is not working now and I cannot even get my first 4 channels even if I restart it. They are ok in CCcam and in Scam however. Can anyone help ?

sonic1

05-09-2009, 02:04 PM

Post our ccfg's and it will help. you will have to copy and paste them into the thread.

martin83

05-09-2009, 02:30 PM

Post our ccfg's and it will help. you will have to copy and paste them into the thread.

This is my mg_cfg .....

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 02 }

martin83

05-09-2009, 02:39 PM

This is the newcamd.list....

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS = 127.0.0.1 34001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
CWS = 127.0.0.1 34002 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

CWS_MULTIPLE = 192.168.1.2 20000:20005 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server2

martin83

05-09-2009, 02:43 PM

this is the newcs.xml....

<?xml version="1.0"?>


<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 0000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 0000000000000000000000000</ipk>
<ucpk>000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 0000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

<name>upper</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 0000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 0000000000000000000000000</ipk>
<ucpk>000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 0000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>

<device>
<name>smargo</name>
<type>phoenix</type>
<mhz>600</mhz>
<parity>none</parity>
<node>/dev/usb/ttyUSB0</node>
<export>Yes</export>
<enabled>No</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockc0>No</blockc0>
<boxkey>00000000</boxkey>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34002</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
<sid>
<allow>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<enabled>Yes</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> 
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>newcs</name>


<password>newcs</password>


<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>mpcs</name>
<password>dummy</password>
<au>Yes</au>
<spider>No</spider>
<sidoverride>No</sidoverride>
<readers>
<allow>lower</allow>
<allow>smargo</allow>
</readers>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>

martin83

05-09-2009, 02:47 PM

Earlier the first 4 channels were clearing with Mgcamd + Newcs. However I was doubtful as I had cccam installed as well. Infact when I deleted cccam the first 4 channels stopped working and that's my situation now.

:( :o15::07:

sonic1

05-09-2009, 03:03 PM

Here are some files to replace yours, once you have added them do a full reboot and check that they work.
I am not sure which box you have but I have set it for lower card reader.

martin83

05-09-2009, 03:11 PM

Here are some files to replace yours, once you have added them do a full reboot and check that they work.
I am not sure which box you have but I have set it for lower card reader.

I have a dm500s. Thanks for your help.

martin83

05-09-2009, 03:23 PM

I have a dm500s. Thanks for your help.

Unfortunately it didnt' work. It's still not reading the card. The card is ok cause it works in cccam or scam.
I am getting a ' can't decode ' message.

sonic1

05-09-2009, 03:41 PM

Can you log into the newcs webinterface ?
dreamboxip:8080

martin83

05-09-2009, 05:28 PM

No. I tried several times.

nilic

06-09-2009, 10:01 AM

Can you try different image? Pli works very well.

martin83

06-09-2009, 11:00 AM

Can you try different image? Pli works very well.

Finally got mgcamd + newcs working (as the first four channels of jsc are ok) after I used PLI image. Something was wrong with Gemini then. However still cannot connect to newcs web server using dreamboxip:8080.

If I cannot connect to newcs web server does it mean my card still cannot be updated?

martin83

06-09-2009, 11:15 AM

FINALLY I GOT MY UPGRADE using mgcamd + newcs .... tHANKS NILIC AND SONIC1.

:respect-040:

docflit

11-09-2009, 08:50 PM

Hello Friends
Unfortunaly I have the same problem, and since 6 days now I couldn't update my JSC card renewed successfly from internet.
With your help the card is working now under Mgcamd 1.30d and NewCs 1.61. so is this all what I need or do I have to do something else??
I have now 4 channels clear (+1....+4) do Ihave to stay on one of theses channel (+2) or I must stay on an encrypted one (+5)
From the official site of aljazeera we can send a refresh signal to update card.. is this necessery for the update??
thanks for help :bowing-036::bowing-036:
Regards