Help to read irdeto cam [Archive]

View Full Version : Help to read irdeto cam

spinmar

08-09-2009, 10:33 AM

Hi,
I'm a new italian user of azbox hd premium.
I installed all con fw 2880 (sat+dtt) and now I'm trying to read my regular card Dahlia tv. It's a provider which uses irdeto 2 cryption method. I have the card and I'd like to use with my azbox.
I installed REAL CCcam 2.1.1 following the guide on sticky thread.
I can connect to http://<azbox_ip:16001/ but I get scrambled for dahlia channels.
Can cccam read my irdeto cam using internal slot? I have to configure something?
Can you help me :bigear:?
Thanks very much!!

hanswurscht

08-09-2009, 10:37 AM

you cant share a Cam(Diablo, yes, but with restrictions, no other)

goran

08-09-2009, 10:52 AM

Maybe NewCS 1.20 [for internal card reader] + CCcam - does anyone know?

I have seen people sorting it out with NewCS + MGcamd and het EMMs/updates [Nova]...

spinmar

08-09-2009, 11:02 AM

Maybe NewCS 1.20 [for internal card reader] + CCcam - does anyone know?

I have seen people sorting it out with NewCS + MGcamd and het EMMs/updates [Nova]...

Could you explain better your ideas? I'm a newbie... :bow-004:
So you are suggesting me to install NewCS 1.20: how I configure newscs and cccam to talk each other?
Otherwise I could install NewCS 1.20 and MGcamd (disabling cccam I suppose): what does it mean "het EMMs/updates"?
Sorry for my .... stupid questions but I'm trying to understand how to use my card. :bowing-036:

spinmar

08-09-2009, 11:03 AM

you cant share a Cam(Diablo, yes, but with restrictions, no other)
You are telling me that I have to buy a diablo card to use with my irdeto one?

hanswurscht

08-09-2009, 11:07 AM

no, I told you only, your irdeto CI- Module isnt working for sharing

goran

08-09-2009, 12:14 PM

Could you explain better your ideas? I'm a newbie... :bow-004:
So you are suggesting me to install NewCS 1.20: how I configure newscs and cccam to talk each other?
Otherwise I could install NewCS 1.20 and MGcamd (disabling cccam I suppose): what does it mean "het EMMs/updates"?
Sorry for my .... stupid questions but I'm trying to understand how to use my card. :bowing-036:

Get - not het - typo. It means "get updates" in MGcamd, that Mbox can't...

Use SEARCH function, if you're a Newbie and don't even want to read the Stickies or similar titles on the first page of this section... It's there... more or less...

spinmar

08-09-2009, 01:08 PM

no, I told you only, your irdeto CI- Module isnt working for sharing

But I don't want to share anything. I want to use my card locally using the internal card reader.

spinmar

08-09-2009, 01:11 PM

Get - not het - typo. It means "get updates" in MGcamd, that Mbox can't...

Use SEARCH function, if you're a Newbie and don't even want to read the Stickies or similar titles on the first page of this section... It's there... more or less...
I used the search function (I searched irdeto) but if you try you'll see that you don't find anything relevant (maybe irdeto is not much used).
I read all sticky thread (I followed the sticky thread and I installed cccam) but there is no information about irdeto.
But this cryptation method is supported by internal card reader using some emu/sw?

goran

08-09-2009, 01:27 PM

We told you: NewCS.

If not here, try Mbox forum for NewCS + Mbox.

Otherwise search the net, especially Greek forums, of course...

Good luck!:respect-051:

neilD

08-09-2009, 01:28 PM

I don't think cccam on its own will read the card. I use newcs and cccam with an external reader, but there is a version of newcs which can read the internal card reader you must search for that. To get them to tak together is easy in the newcs.xml configuration file you add an account for a "user" and a "password". You then add this user name and password to CCcam. They then connect and "talk" to each other.
You can see if newcs can read your card because it has a web browser interface which you start on your PC. normaly Azbox_IP_address:16000 or 16001 (cannot remember) there is a menus there when you can tell newcs to read you entitlments (i.e. what you subscribe for). If it reads this then you are one you way.
good luck (its does need a bit of time - don't give up)

spinmar

08-09-2009, 01:39 PM

We told you: NewCS.

If not here, try Mbox forum for NewCS + Mbox.

Otherwise search the net, especially Greek forums, of course...

Good luck!:respect-051:

Ok I'll try and I let you know the result. :respect-054:
Thanks.

spinmar

08-09-2009, 01:41 PM

08-09-2009, 08:11 PM

If it helps here is a newcs reader config which I use for a greek irdeto version 5 card it was a pain to get it working took me 3 weeks of exerimenting but I guess this will work with other irdeto cards

Also if you do use mgcamd you will need to ensure the irdeto caid is at the top of the priority list file

this will work with newcs 1.50 and up I dont think you need to use irdeto camkey data with newer versions of newcs

I dont know the az box as I dont have one so perhaps someone else on the forum could validate is azbox card slot is referenced as sci0

<readers name="Card Readers">
<device>
<name>lower</name>
<type>Sci</type>
<node>/dev/sci0</node>
<parity>none</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<Irdeto-camkey>A0A1A2A3A4A5A6A7</Irdeto-camkey>
<Irdeto-camkey-data>CAFB64CA970D10DEDF769EDA1A570713C 50BE71CA871194FF5820BF7B54606BBB8 EC7A1D51B1649A3ED222B53EC58F5638F 1E2699F509F3089AFE291CAF5E23C</Ird3to-camkey-data>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>12345</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>

spinmar

09-09-2009, 07:56 AM

Also if you do use mgcamd you will need to ensure the irdeto caid is at the top of the priority list file

this will work with newcs 1.50 and up I dont think you need to use irdeto camkey data with newer versions of newcs

Hi mp thanks very much!!
Ho can I ensure the irdeto caid is at the top of the priority list file?
Whan can I do?
Using Goran's suggestion I'm using newsc 1.20: is it ok?
In newcs.xml I have the section <readers name="Standard Phoenix on PC">: do I have to replace with yours?

neilD

09-09-2009, 10:15 AM

Hi mp thanks very much!!
Ho can I ensure the irdeto caid is at the top of the priority list file?
Whan can I do?
Using Goran's suggestion I'm using newsc 1.20: is it ok?
In newcs.xml I have the section <readers name="Standard Phoenix on PC">: do I have to replace with yours?

From memory the device for the internal reader is /dev/scard
/dev/sc0
/dev/sc1 are the CAM slots

Yes I would use his setup and see if it works (replaceing /dev/sc0) and then start newcs up and look at the output, especially near the beginnign where it tries to open the card slot

hanswurscht

10-09-2009, 08:37 AM

device internal cardreader is scard on newCS 1.20

<node>/dev/scard</node>

spinmar

10-09-2009, 01:41 PM

Ok, but with the fw 2880 newcs 1.20 is the only version I can use with the internal reader or I can use the new newcs 1.67?

hanswurscht

10-09-2009, 06:15 PM

specially for Irdetocard Ive found this, but dont know which NewCS Version is using it. In Post it was for 1.65,maybe also working with older Versions:

<irdetomode>0</irdetomode>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 000000000000000000000000000000000 0000000000000000000000000</irdeto-camkey-data>

Mangasora

10-09-2009, 07:12 PM

But I don't want to share anything. I want to use my card locally using the internal card reader.

Then why don't you use MultiCAS.

spinmar

10-09-2009, 07:26 PM

I have no good news :18:
I'm using 2880 fw and newscs 1.20 as you suggested me.
As first things, thanks to mp, I tried with this newcs.xml:

<newCSconfig>

<readers name="Card Readers">

<device>

<name>lower</name>

<type>Sci</type>

<node>/dev/scard</node>

<parity>none</parity>

<export>yes</export>

<enabled>yes</enabled>

<blocksa>No</blocksa>

<blockua>No</blockua>

<blockga>No</blockga>

<Irdeto-camkey>A0A1A2A3A4A5A6A7</Irdeto-camkey>

<Irdeto-camkey-data>CAFB64CA970D10DEDF769EDA1A570713C 50BE71CA871194FF5820BF7B54606BBB8 EC7A1D51B1649A3ED222B53EC58F5638F 1E2699F509F3089AFE291CAF5E23C</Irdeto-camkey-data>

<PTShandshake>no</PTShandshake>

<crypto-special>no</crypto-special>

<carddetect>yes</carddetect>

<newcamd_port>12345</newcamd_port>

<autosid>yes</autosid>

<priority>round</priority>

</device>

</readers>

<cache>

<emm>20</emm>

<ecm>-1</ecm>

</cache>

<debug>

<password>password</password>

<level>internal</level>

<type>all</type>

<output>all</output>

<console_options>normal,all</console_options>

<logfile>/tmp/newcs.log</logfile>

<file_options>normal,all</file_options>

<udp_host>192.168.0.107</udp_host>

<udp_port>1000</udp_port>

<udp_options>normal,all</udp_options>

<tcp_port>1001</tcp_port>

<tcp_options>normal,all</tcp_options>

</debug>

<newcamdserver>

<enabled>yes</enabled>

<name>Irdeto</name>

<deskey>01 02 03 04 05 06 07 18 09 10 11 12 13 14</deskey>

<userfile>/tmp/users.txt</userfile>

<user>

<name>user1</name>

<password>password1</password>

<au>on</au>

</user>

</newcamdserver>

</newCSconfig>

Starting newcs from telnet I get:

[ 18:04:40 ] [ Box detect ] Box type 9
[ 18:04:40 ] [ Config ] hwkey not found !
[ 18:04:40 ] [ Config ] ekpair not found !
[ 18:04:40 ] [ Config ] /dev/scard ECM priority: round
[ 18:04:40 ] [ Newcamd ] Server name : Irdeto
[ 18:04:40 ] [ Newcamd ] Des key : 0102030405060718091011121314
[ 18:04:40 ] [ Newcamd ] User 2: user1, Pass: password1, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, reader control: No, level: 0
[ 18:04:40 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 18:04:40 ] [ ECM Cache ] Initialising dynamic Cache
[ 18:04:40 ] [ Loader ] Reader type 5 on node /dev/scard
[ 18:04:40 ] [ Sci ] Opening device /dev/scard
[ 18:04:40 ] [ Sci ] No card present in reader
[ 18:04:40 ] [ Loader ] Reset failed ...
[ 18:04:40 ] [ Loader ] Starting Newcamd Server on port 12345

but my card is inside.
Then I tried the suggestion of hanswurscht but the result is the same.
I tried to use multiCAS too, disabling newsc and mgcamd, but the result is the same.
I hope that mp or someone else could help me and give me any other hints :bigear:
Best regards

goran

10-09-2009, 08:15 PM

OKI, I missed it - that you don't wanna do the CS - as mentioned, use MultiCAS, then...:smash:

Mangasora

10-09-2009, 08:20 PM

Start Smart Card is initialized
Found ATR length = 20
--> CARD_INIT_OK...
[EMU_CTRL] main: START_SMARTCARD(sc = 0)
card_set_param param_status = 3 || Mode = 3
************ io_err_count_dbg = 0
************ Start ------ at Thu Sep 10 19:10:08.028
[EMU_CTRL] main: sc_card[0].casystemid = 0x0604
[EMU_MOD] card_in_out_controll: In_Out = 1 [Stream_id = 0 || Sequence = 65535]
[EMU_MOD] Take_ecm_pid_for_Card: SteamID = 0 | Card = 0 | pCard_CAS_id = 0x604
[EMU_MOD] Take_ecm_pid_for_Card: Mode = 0
[EMU_MOD] card_in_out_controll: CARD:: Stream_id = 0, ECM_PID = 0x1fff, SYSTEM_C
AS_ID = 0xffff

This is getting with MultiCAS and old I2 card.

10-09-2009, 10:24 PM

what version of irdeto card look on back

version 5 and above will not work with less than newcs 1.50 from past experience

spinmar

11-09-2009, 08:43 AM

This is getting with MultiCAS and old I2 card.
Ok which version of MultiCAS?
Which version of firmware (I know that the code for the card reader changed between firmware versions)?
Any config of MultiCAS?
Thanks :respect-048:

Mangasora

11-09-2009, 10:45 AM

Ok which version of MultiCAS?
Which version of firmware (I know that the code for the card reader changed between firmware versions)?
Any config of MultiCAS?
Thanks :respect-048:

I am with the last software, but older is the same,also you can use phoenix interface.

http://media.snimka.bg/4259/014772414-thumb.jpg (http://mangasora.snimka.bg/other/azbox-hd.420638.14772414)http://media.snimka.bg/4259/014772415-thumb.jpg (http://mangasora.snimka.bg/other/azbox-hd.420638.14772415)http://media.snimka.bg/4259/014772416-thumb.jpg (http://mangasora.snimka.bg/other/azbox-hd.420638.14772416)

spinmar

11-09-2009, 11:32 AM

I am with the last software, but older is the same,also you can use phoenix interface.

http://media.snimka.bg/4259/014772414-thumb.jpg (http://mangasora.snimka.bg/other/azbox-hd.420638.14772414)http://media.snimka.bg/4259/014772415-thumb.jpg (http://mangasora.snimka.bg/other/azbox-hd.420638.14772415)http://media.snimka.bg/4259/014772416-thumb.jpg (http://mangasora.snimka.bg/other/azbox-hd.420638.14772416)

But you are using the internal reader or an external one?

Mangasora

11-09-2009, 09:59 PM

But you are using the internal reader or an external one?

I use phoenix interface for my *****card, because she is does not work in the internal slot.