AZbox going to get launched through window soon

[boblester40]

So i have reset my disk and usuals is working perectly , the problem i still have is that CCcam just doe not seem to work at all , i have tried 2.0.4 2.10 etc etc and it is driving me mad.

I am using single cline for payserver which works perfect in TM9100 but will not even attempt to clear on Azbox , it as if the azbox is not even trying to connect to get codes as the lights do not flicker on the router as with the TM9100, is there somethig i have to do regarding the IP address ? its fixed on the TM but the azbox keeps going to DHCP ?

I have activated the cams under plugins xcas section etc etc .

Can anyone who is out there using a single cline payserver post there configs to compare.

Also if i install cccam 0.2 full under the Xcas menu i dont get a cccam config file to edit why is this .

+ is there any way to do a full reset which will remove all files etc, when i do factory settings all the files for the prevous cccams are left .


Sorry for all the whining but this is making go ga ga :eek:

[boblester40]

OK so i may have found something else , I had been adding my Cline at the end of the CCcam cfg file like TM9100 but it looks like there is a specific location for CLline within CCcam cfg on AZbox is this right ?

Also does the # remian infront of the Cline

thanks
bob

[albaki77]

As far as i know it should not matter where you put the Cline(mine are at the top)
Leaving the # in front of the Cline will tell CCcam to ignore the text after it.

e.g.


# AZBOX congig file (ignore this line)

C: serve.*******sharing1.com 22500 username password no
#C: serve.*******sharing2.com 22500 username password no (ignore this line)


SERVER LISTEN PORT : 12000
INFO LISTEN PORT : 16000
HTML INFO LISTEN PORT : 16001

CAID PRIO FILE : /EMU/lib/CCcam.prio
PROVIDERINFO FILE :/EMU/lib/CCcam.providers
CHANNELINFO FILE : /EMU/lib/CCcam.channelinfo



I am using 2.11 with only the odd glitch which will be sorted in time:cup-006:

[tsakman]

Sorry for asking here but albaki77 how many clines can handle azbox ccam?
And what cccam installer u use?
Sorry again for posting here

[Carp95]

@boblester40

Want a complete set off files for CCcam?
Just unpack and ftp the set in the box.
lib goes into /EMU
and just copy the complete OpenXCAS map into /EMU
Change all properties into 755

Add as many C lines that you want all will work.

Reboot

** Notice in the .priofile sly Uk is set to 0961 if you need 0963 just change the 1 into 3
CCcam.prio file can be found in /EMU/lib
*** Juse the CCcam.cfg that I packed it holds the right setting and paths

**** Ohh yeah just in case: Whats your adress I want to catch that box HAHAHAHAHAHA


+ is there any way to do a full reset which will remove all files etc, when i do factory settings all the files for the prevous cccams are left .


Yeahh just remove the complete OpenXCAS map through FTP

[sami8519]

What is this misleading title? You need only to read a little and you wouldnot have the need to even open a thread let alone with a misleading title.

[Carp95]

What is this misleading title? You need only to read a little and you wouldnot have the need to even open a thread let alone with a misleading title.

Well he just got a bit frustated I guess sami:o16:

I found out that the install scripts for CCcam didn't do the job always right.

Did 4 premiums yesterday for unhappy users with my methode and the problems where goone and 4 happy users again.

It's still important to use a prio file especialy with providers wich are multicrypted excample:

C+ holland --> uses SECA3 and SECA2 and Irdeto2
With installerscript you don't get a good priofile also there's no seca handler set, result---> encryption brakes up and picture freezes.
My cfg has set seca handler and my prio says just use seca.

[Carp95]

CCcam----> Gbox connection:

G: <pass> <localhost> <localport> <peerpass> <peeraddress> <peerport>

So:

G: yourpass yourdns yourport peerpass peerdns peerport

No need for M

[boblester40]

IT WORKS !!!!!!!!!!!!!!!!!!!!:respect-050::respect-050::respect-050:

Thanks to every one , once i tried the files from CARP95 i am now online have to click back and forth sometimes to clear but A massive step forwards , hopefully that will be resolved with a few firmware tweeks.


MANY thanks again

rgds
bob

[Carp95]

bob

Is it sly UK and yes wich one blue or white?
Just saw there's no entry for Sly in my package ( oeps1)

In case of white sly add this line to CCcam.prio ( in /EMU/lib)
P: 0963

for blue sly:

P: 0961

Hope it helps

[boblester40]

Sly was worse for sure , What do you mean white and blue ??

rgds
bob

[Carp95]

Blue --> old card --> CAID is 0961
White-> new card-> CAID is 0963

So to tel CCcam wich CAID is has to watch for you set PRIO ( P )

P: 0961 #sly old (blue card )
P: 0963 #sly new ( white card)

Do not set both.

[boblester40]

OK thanks not sure which i am beeing fed but will try either one (but not both) to see ehat works best .


Big thanks again:respect-055:

[Carp95]

You can see that in your webbrowser off your PC

http://ipnumberAZBOX:16001/shares

There you see the card(-s) you're provided with ( and the number of hops away )

[boblester40]

super will try that later

[boblester40]

You can see that in your webbrowser off your PC

http://ipnumberAZBOX:16001/shares

There you see the card(-s) you're provided with ( and the number of hops away )


Checked Azbox last night and i am getting supplied with both types of cards about 3 of each , does the number of hops tell me which one i will be using ?

rgds
bob

[Carp95]

No thats telling you how "far" they're away from you.

In general the card with the lowest hopcount will work best.
You could even change the C line so you only get the card you want.

For excample:

0961:0 - 3 - 0

0961:0 = card
3 = nr of hops away
0 = no reshare level

So if you have

0961:0 - 3 - 0
0961:0 - 2 - 0
0961:0 - 1 - 0
0963:0 - 2 - 0
0963:0 - 2 - 0
0963:0 - 1 - 0

Say you only want the hop 1 cards then make the C line like this:

C: dyndnsname port user passw no { 0:0:3, 0961:0:1, 0963:0:1 }

Now you only receive hop1 card for sly

You could even block a ident

C: dyndnsname port user passw no { 0:0:3, 0961, 0963:0:1 }

Thats no 0961 ident only 0963 @max hop1

Get it?

[boblester40]

I think so Thanks again , i have firmware and channel lists to refine as yet so will worry about the sly thing later .

rgds
bob