USB keyboard, how to do ??

[Dig Deep]

Does it need an install or setup ?

Tried to find some help online but no joy :respect-059: so I better ask in here !

Can You use both USB at the same time ? One for the keyboard and one for a pen ?

[hanswurscht]

of course you can.
You can also take an USB Hub(better active) and have 4 or more Ports.
But only one Port is for firmwareupdate with USB Pen(dunno which, you can try)

[Dig Deep]

Yes, the lower one is OK for upgrades.

Still, the USB keyboard is not recognized ? so, any install or so ?

[hanswurscht]

not all are compatible, so take a look with dmesg what happens

[Dig Deep]

OK then it is just a matter of finding a working keyboard !

Then I must try something else, the one I have will not work.

Thank´s guys - will report back when I have it going:respect-048:

[hanswurscht]

Here is a BenQ Wireless working:
input: HID 0d62:2024 as /class/input/input0
input: USB HID v1.10 Keyboard [HID 0d62:2024] on usb-0000:00:02.2-1.2

drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: input irq status -71 received
usb 3-1.2: USB disconnect, address 3
drivers/usb/input/hid-core.c: input irq status -71 received
drivers/usb/input/hid-core.c: can't resubmit intr, 0000:00:02.2-1.2/input0, stat
us -19

[zeini]

Now usb-keyboard (fw 0.9.3661)is practicable to replace the remote control. Here I post the usbkey.conf. So you can easily look for the exactly button on the usb-keyboard you have to press, instead the remote control.



CHDOWN=63497 #pageup
CHUP=63498 #pagedn
VOLUP=61 #'='
VOLDOWN=45 #'-'
MUTE=32 #space
OK=13 #enter
MENU=9 #tab
UP=63490
DOWN=63491
LEFT=63488
RIGHT=63489
DEL/BACK=8 #Backspace
SEARCH=63492 #ins
CHECK=63493 #del
REW=60#shift+',' = '<'
STOP=34#shift+''' = '"'
PLAY=63 #shift+'/' = '?'
FWD=62#shift+'.' = '>'
PREV=123#shift+'[' = '{'
NEXT=125#shift+']' = '}'
RECORD=63524 #F10
GUIDE=96#`'`
HOME=63494 #home
INFO=126#'~'
SLEEP=63525 #F11
WAKEUP=63527 #F12
UHF
AUX
USB
RESOLUTION
TV/RADIO
RED(SUB-T)=63515 #F1
GREEN(TEXT)=63516 #F2
YELLOW(LANG)=63517 #F3
BLUE(i-KEY)=63518 #F4
YOUTUBE=63519 #F5
WWW=63520 #F6
E-MAIL=63521 #F7
EXIT=27 #ESC

[gtg60]

Is there a way to fine tune this yourself? I have a keyboard that has a lot of these buttons already and would like to get them to work as intended.

How would I see what code/ command is being received when I press the 'Record' button for example and is it then just a case of substituing that command in the record part of the usbkey.conf?

[goran]

Hi, guys!

You just plug it in and it is automatically installed or what do we do exactly?

I am about to buy one and I think an integrated one with a touch-pad/trackball would be good: any such devices known to work with AZbox HD latest FW, please?

Also, which USB HDD 1TB - any idea?

Thanx!

[zeini]

Ok, You just plug it in and it is automatically installed. But I'm sadly, mouse, or touch-pad/trackball do not run at AZBoxHD.

And keyboard also run with usb-HDD.

[goran]

Shoot!:beatdeadhorse5:

But I am sure there is a solution to it... So, we wait... ;)

HDD?