PDA

View Full Version : Lost internet


Dig Deep
11-10-2009, 10:16 AM
after a system reset (formatting) and uploading a new fresh image.

After that there is no connection anymore. Tried to downgrade to a few older FW still no joy.

The box is trying to connect but can never find a way out:respect-014:

So what could have happened ?
Smudger
11-10-2009, 10:20 AM
Wireless or Cable
Dig Deep
11-10-2009, 12:46 PM
Sorry, cabel.
Giga
11-10-2009, 01:10 PM
switch dhcp on, do you get an IP? check cable connection if it is seated well in it's connection? router or AZ box
BigDave
11-10-2009, 01:28 PM
Hiya m8 try and re check to cabel.

Regards BigDave
Dig Deep
11-10-2009, 06:00 PM
switch dhcp on, do you get an IP? check cable connection if it is seated well in it's connection? router or AZ box

I tried that and checked both router and box, Still no joy and I can see in the router that the box is not connected..
Giga
11-10-2009, 06:11 PM
I tried that and checked both router and box, Still no joy and I can see in the router that the box is not connected..
has the AZBox HD a network connection led indicating at the back? is it on?
Dig Deep
12-10-2009, 06:55 AM
Yes it has, in fact 2 of them :bigear:
They are both on and one of them is flickering but not ne an eager way lol more just like searching but no more. The box is trying to connect but never managed to do it.
Giga
12-10-2009, 07:01 AM
connection seems to work: check the router network security if access is limited to certain ip addresses or MAC's if these don't match no access. switch these temporary off.
For AZ Box network problem, you have to rely on help from another member of this forum: switch DHCP on in AZ Box and see if you get IP address.
goran
12-10-2009, 11:40 AM
In my router [D-Link] under Setup -> Network Settings -> Add DHCP Reservation -> enable and save -> DHCP Reservations List [you should see it there]. This is what I do, anyway...

You can always put it into the DMZ and see...

Good luck!:coolgleamA:
Dig Deep
12-10-2009, 05:22 PM
Thank´s mates for all help.

I will do as follow

1.Put the latest FW on the USB
2.Reboot
3.Format
4.Install update.

This will be the second time in 2 days :lurk5:

Wish me luck.
Dig Deep
13-10-2009, 07:04 AM
OK a new fresh (formatting) install and I was back on line.

After some chat with Goran all was working... Tx Bro !:cup-006:
goran
13-10-2009, 01:19 PM
Pleasure, m8, as always! ;) :)