terrorman
17-10-2009, 03:05 PM
Well, tired of playing both, I got involved with the tuner, to find the hang and that all work.
The DM8000HD has 2 internal tuner DVB2, I have bought another but this is an input and output is not double.
Well, first of all, my intention is to verify that CCcam open more than 2 channels at once, I've read on some forums that it is not possible, the maximo were 2 that the only solution was MBox, and of course ... this we must try it!.
I have put a swich of 1 input and 3 outputs, I made 3 new cables and then connected to each of the 3 tickets.
In the configuration of tuners I have this right now, is what I use to test.
The tuner A and D if I set the engine and the B connected to the tuner I say A. (is only a test, we can also configure the engine)
http://img2.imageshack.us/img2/7508/23886419.jpg
http://img11.imageshack.us/img11/6950/25584007.jpg
I tell you the steps that the video shows to make it really clear.
We are in the channel list, and put C + HD.
We recorded the HD channel to C + internal HDD DM8000HD.
Changes channel to another HD, HD DCINE.
Start plugin PIP.
With PIP HD channel activated switch to another channel, Calle 13, while the pilot continues REC ... and are 3 channels simultaneously.
To see how you control the q PIP will show you how it moves and resizes.
Finally, while pulse OK to get the menu info, If you look only is the tuner A and B, is when I start the DreamStream E2 on the PC, and channel change, DECAS, at that time turn on the tuner D , 4 channels at the same time, I see, I think I can open any more, I need another pc, and no time jijijij.
Video: [Video Demo] (http://www.islaremota.com/forum/manualdm/8000HD/video/dm8000_4_canales.mpg)
Image of my pc with DreamStream E2 + Capture, showing that it is possible to open the 4 channel simultaneously.
This image is just the end of the video, make it cost me pq'm on a laptop and a bit saturated with everything at once, that's why the end of the video is somewhat boring, I was waiting to move off the DreamStream E2.
http://img11.imageshack.us/img11/1077/57062459.jpg
The DM8000HD has 2 internal tuner DVB2, I have bought another but this is an input and output is not double.
Well, first of all, my intention is to verify that CCcam open more than 2 channels at once, I've read on some forums that it is not possible, the maximo were 2 that the only solution was MBox, and of course ... this we must try it!.
I have put a swich of 1 input and 3 outputs, I made 3 new cables and then connected to each of the 3 tickets.
In the configuration of tuners I have this right now, is what I use to test.
The tuner A and D if I set the engine and the B connected to the tuner I say A. (is only a test, we can also configure the engine)
http://img2.imageshack.us/img2/7508/23886419.jpg
http://img11.imageshack.us/img11/6950/25584007.jpg
I tell you the steps that the video shows to make it really clear.
We are in the channel list, and put C + HD.
We recorded the HD channel to C + internal HDD DM8000HD.
Changes channel to another HD, HD DCINE.
Start plugin PIP.
With PIP HD channel activated switch to another channel, Calle 13, while the pilot continues REC ... and are 3 channels simultaneously.
To see how you control the q PIP will show you how it moves and resizes.
Finally, while pulse OK to get the menu info, If you look only is the tuner A and B, is when I start the DreamStream E2 on the PC, and channel change, DECAS, at that time turn on the tuner D , 4 channels at the same time, I see, I think I can open any more, I need another pc, and no time jijijij.
Video: [Video Demo] (http://www.islaremota.com/forum/manualdm/8000HD/video/dm8000_4_canales.mpg)
Image of my pc with DreamStream E2 + Capture, showing that it is possible to open the 4 channel simultaneously.
This image is just the end of the video, make it cost me pq'm on a laptop and a bit saturated with everything at once, that's why the end of the video is somewhat boring, I was waiting to move off the DreamStream E2.
http://img11.imageshack.us/img11/1077/57062459.jpg