i need help with azbox & irdeto cam

[appc777]

i need help with azbox & irdeto cam
i have
1-irdeto cam ver:0106softcelt ver 2.09 cls (blue one)
2-aljazeera irdeto card ver 5.7
azbox read cam + card but pic not clear
FW 093501

[pr2]

Do you try to put the CAM in slot 2 instead of SLOT 1? reboot the box and test.

[xanadu]

If the CAM does not work in either slot, you may need the hardware modification to allow the CAM to work.

Some CAMS are known not to work in Azbox HD without the modification.

Newer Azbox HD from August should have new mainboard and mod not required.

[hanswurscht]

Have you tried without a Cam and only Multicas with internal Cardreader?

[deliol]

i need help with azbox & irdeto cam
i have
1-irdeto cam ver:0106softcelt ver 2.09 cls (blue one)
2-aljazeera irdeto card ver 5.7
azbox read cam + card but pic not clear
FW 093501

Azbox doesnot work well with irdeto cams.... You could try a newer cam revision (softcell v1.11) which definitely supports your ACS 5.7 card...
Some 1.06 cams are possible to upgrade to 1.11 , others don't (so you need to buy a newer cam)
Or you could try with a dragon (t-rex) cam if you have one , on the upper slot of azbox , just be sure you have programmed the dragon with a predator file containing the correct CAID for your card (should be 0604 or 0606 , add them both to be sure!)
Good luck...

[appc777]

i need help with azbox & irdeto cam
i have
1-irdeto cam ver:0106softcelt ver 2.09 cls (blue one)
2-aljazeera irdeto card ver 5.7
azbox read cam + card but pic not clear
FW 093501

i tried no help

[appc777]

If the CAM does not work in either slot, you may need the hardware modification to allow the CAM to work.

Some CAMS are known not to work in Azbox HD without the modification.

Newer Azbox HD from August should have new mainboard and mod not required.

could you plz give me some hints regard hdwr mod

[appc777]

Have you tried without a Cam and only Multicas with internal Cardreader?

i tried not work

[appc777]

Azbox doesnot work well with irdeto cams.... You could try a newer cam revision (softcell v1.11) which definitely supports your ACS 5.7 card...
Some 1.06 cams are possible to upgrade to 1.11 , others don't (so you need to buy a newer cam)
Or you could try with a dragon (t-rex) cam if you have one , on the upper slot of azbox , just be sure you have programmed the dragon with a predator file containing the correct CAID for your card (should be 0604 or 0606 , add them both to be sure!)
Good luck...

my ACS 5.3 card...