PDA

View Full Version : problems already


paul01609
27-10-2009, 05:09 PM
carnt get the box to boot any way around it?i have pulled the power held down the front power button and pluged cable in too try flashing it but the power just dont come on untill i let go of button and preess it again.wont boot on its own hangs as soon as it starts to boot,really done the same as i did with the 800,whats the usb recovery stick for?pc dont have serial
Quailman
27-10-2009, 05:12 PM
To get it into network/ flash mode. turn off and boot with finger held on the front down button on the box, not the power button.

It should then give you its IP address.
paul01609
27-10-2009, 05:18 PM
thx m8 lol not like the 800 model lol,work straight away thought was same steps as the 800
Quailman
27-10-2009, 05:32 PM
No probs m8, :respect-051:
paul01609
27-10-2009, 08:26 PM
quailman can you please tell me what i need for it to be able to play retail dvd please
keith mawer
27-10-2009, 08:34 PM
i congratulate anyone who went this route and im not being cynical either,, i find the techo the easiest and no stress.
Quailman
27-10-2009, 08:35 PM
You need to install libdvdcss2 I will upload the one i have.

Its in the upload section.
paul01609
27-10-2009, 08:45 PM
i congratulate anyone who went this route and im not being cynical either,, i find the techo the easiest and no stress.

stress is the best part about theese boxes :)
kev
31-10-2009, 12:27 AM
Lol.
I can sure agree with that, but when they work they are so amazing...
mushroom
31-10-2009, 12:39 AM
wow 1000 euro and not booting straight away ? just wonder .......
jimrare
31-10-2009, 09:47 AM
wow 1000 euro and not booting straight away ? just wonder .......
Yeah, we are all wondering if you actually read the whole post before posting. These things happen if you are trying to turn it on by pressing the wrong button!! Like trying to turn on your pc by pressing your mouses right button.
paul01609
31-10-2009, 11:00 AM
was my mistake i thought it was the same steps as the 800 to be able to get it to flash
mushroom
31-10-2009, 11:20 AM
Yeah, we are all wondering if you actually read the whole post before posting. These things happen if you are trying to turn it on by pressing the wrong button!! Like trying to turn on your pc by pressing your mouses right button.
i apologise .i must read carefully :) next time
luis
31-10-2009, 12:20 PM
To get it into network/ flash mode. turn off and boot with finger held on the front down button on the box, not the power button.

It should then give you its IP address.


Just let me add if anyone has problems to get the IP (to flash the box). After several trials at first the IP didnīt appear when switching on at the back with the front down button pressed. No way. I had to load flash via null modem and serial port. Then I found out the following:
It always happens when I first go to deep stand-by before switching the DM8000 off. However if I switch the box off (the back switch) from working mode (not deep stand-by), then I always get the IP (to load the flash via web interface) when I switch it on again.