satlubitel
04-11-2009, 07:24 AM
Hi Guys,
I would appreciate your help and advice on following problem I am experiencing from 2 weeks already. It is really giving me hard time……
I am using MultiCAS 160D-D08 (have tried with 160D-D01, 160D-D05, 60D-D07 as well) and FW 3686 (tried with 3661, 3501….) on my AzBox Premium.
The server on the other side which is giving me the card share is CCCam 2.1.2 on a Dreambox (FW as far as I know is Gemini Project 4.5)
Here is the case (2 thinks):
1. I am getting all the time scrambled channels. We have identified that info (on the server side) regarding the current channel I am trying to watch is wrong for example I am on a Jetix TV on 13E and on the server shows I am watching i.e. TV4 on 5E…completely different.
If the person on the server side do a refresh, the correct channel opens.
Seem the CCCam server doesn’t recognize/catch the channel switch
2. For some channels or actually all that are CRYPTOWORKS I am not able to open at all although showed properly on server side. After many restarts of the MultiCAS or just going up/down on the channels they open (happens very rare) but on next restart all is gone….VERY unstable.
If I try a C line from other different server (again Dreambox) I don’t have those 2 problems at all (had a test/temporary C line from a friend for few hours)
Other think in whole story is that before I have used CCCam client 2.1.1 + FW 3281 (and below) with the same DM server and had no problems. Now if I try to go back to that setup, CCCam client seems doesn’t start at all-(if I run ./dvbapi_module says “Waiting for connection…..something like that) and scrambled all the time
Last detail is the on the “problematic” DM server only I am having that issue (all other clients are DM users and able to watch w/o problems)
Well thats all.
I will be really happy if someone can give me solution or direction where to dig….
Cheers!
I would appreciate your help and advice on following problem I am experiencing from 2 weeks already. It is really giving me hard time……
I am using MultiCAS 160D-D08 (have tried with 160D-D01, 160D-D05, 60D-D07 as well) and FW 3686 (tried with 3661, 3501….) on my AzBox Premium.
The server on the other side which is giving me the card share is CCCam 2.1.2 on a Dreambox (FW as far as I know is Gemini Project 4.5)
Here is the case (2 thinks):
1. I am getting all the time scrambled channels. We have identified that info (on the server side) regarding the current channel I am trying to watch is wrong for example I am on a Jetix TV on 13E and on the server shows I am watching i.e. TV4 on 5E…completely different.
If the person on the server side do a refresh, the correct channel opens.
Seem the CCCam server doesn’t recognize/catch the channel switch
2. For some channels or actually all that are CRYPTOWORKS I am not able to open at all although showed properly on server side. After many restarts of the MultiCAS or just going up/down on the channels they open (happens very rare) but on next restart all is gone….VERY unstable.
If I try a C line from other different server (again Dreambox) I don’t have those 2 problems at all (had a test/temporary C line from a friend for few hours)
Other think in whole story is that before I have used CCCam client 2.1.1 + FW 3281 (and below) with the same DM server and had no problems. Now if I try to go back to that setup, CCCam client seems doesn’t start at all-(if I run ./dvbapi_module says “Waiting for connection…..something like that) and scrambled all the time
Last detail is the on the “problematic” DM server only I am having that issue (all other clients are DM users and able to watch w/o problems)
Well thats all.
I will be really happy if someone can give me solution or direction where to dig….
Cheers!