incubus help required

[foggy]

Can any one help with adding a cccam line to incubus. Here is what i have done, but i do not get a pic

################################# ################################# ############
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# Each section are [<section_name>:<option_1>:<option_x>] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
################################# ################################# ############

########################### general configuration ############################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
#
background_execution=1

# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
#
debug_level=0

# This option enables (1) or disables (0) the writing of debug information to the
# console.
#
log_to_console=0

# This option enables (1) or disables (0) the writing of console output to a log file
#
log_to_file=1

# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
logfile_name=/var/bin/incubusCamd.log

# This is the path and filename to read SoftCam.Key file
# by default it will be searched in the /var/keys directory
#
softcamfile_name=/var/keys/SoftCam.Key

# This is the path and filename to read prio file
# by default it will be searched in the /var/bin directory, or in /etc, or in /var/keys
#
priofile_name=/var/keys/incubusCamd.prio

# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
# 0 - Off
# 1 - On
#
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=0
on_screen_messages_wait_for_key_u pdate=0
on_screen_messages_ecm=0
on_screen_messages_emm=0

# When activated, incubusCamd will listen on the specified port for connections. All
# log activity will be broadcast in real-time to connected clients.
#
console_logs_broadcast=1
console_logs_broadcast_port=666

# Enable/disable incubusCamd web interface (default port is 668).
# 0 - Disable
# 1 - Enable
webif=1
webif_port=668

########################### provider configuration ###########################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#

[Prov:000000:CaID:0000]
check_priority=cs,cs,cs
cs_protocol_order=cccam
process_emms_on_cs_mode=0
process_emm_g=0
process_emm_s=0
process_emm_u=0
# ----------------------------------------------------------------------------
# this provider is a stand-in for all cards and all caid not declared previously
#
# You can select wich type of priority to assign on each caid/prov combination
# priority name available are: card,emu,cs
# card: internal card reader
# emu: internal emulator
# cs: card share protocols
# each type must be separated by a comma
#
# you can also set to use only cs and nothing more, to do it insert on each comma "cs"
# example: check_priority=cs,cs,cs # only cs in this case
# example: check_priority=card,emu,emu # no cs in this case
# obviously this is not suggested but if you prefer to disable an option you should do it in this way
# you can also declare only one type: check_priority=cs
# or two types: check_priority=cs,emu
# and so on
check_priority=cs,emu,card

# You can select wich protocol will be used first for the current caid/prov combination
# protocol name available are: newcamd,cccam,gbox,radegast,camd3 3,camd35,aroureos
# each protocol must be separated by a comma
#
# you can also declare only one type: cs_protocol_order=cccam
# or two types: cs_protocol_order=cccam,newcamd
# and so on
cs_protocol_order=newcamd,cccam,g box,camd35,camd33,radegast,aroure os

# Enable (1) or disable (0) emm process when a cs protocol is used
# 0 - Off
# 1 - On
#
process_emms_on_cs_mode=0

# Enable (1) or disable (0) emm g type process
# 0 - Off
# 1 - On
#
process_emm_g=0

# Enable (1) or disable (0) emm s type process
# 0 - Off
# 1 - On
#
process_emm_s=0

# Enable (1) or disable (0) emm u type process
# 0 - Off
# 1 - On
#
process_emm_u=0

# Enable (1) or disable (0) seca 3 ecm pid handler
# when is set to On, it will try to use seca 3 ecm pid
# before try seca 2 ecm pid, otherwise seca 2 pid will
# be selected firstly
# 0 - Off
# 1 - On
#
seca3_handler=0

#[Prov:000501:CaID:1833]
#check_priority=cs,emu,card
#cs_protocol_order=cccam,newcamd, gbox,camd35,camd33,radegast,arour eos
#process_emms_on_cs_mode=0
#process_emm_g=0
#process_emm_s=0
#process_emm_u=0
#seca3_handler=0
########################### servers configuration ############################
[Servers]
card_server_url=cccam://user:assword @server.dyndns.org:12220
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# newcamd://<username_31>:<password_31>@<hostname>:<port>:<caid_4>:<prov_id_6>/<des_key_14>/[EMM]
# aroureos://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# radegast://@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# camd33://<username_10>:<password_10>@<hostname>:<port>:<caid_4>:<prov_id_6>/[aes_key_16]/[EMM]
# camd35://<username_32>:<password_32>@<hostname>:<port>:<caid_4>:<prov_id_6>/[EMM]
# gbox://<localhost>:<localport>:<password_8>@<peer_address>:<peer_port>:<peer_pass_8>/[EMM]
#
# cccam://<username_20>:<password_32>@<hostname>:<port>/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
# i.e:
#Newcs
#cyfra+
card_server_url=newcamd://ipbox:ipbox@1xx.1xx.1.x6:10001:01 00:000068/0102030405060708091011121314/[EMM]
#polsat
card_server_url=newcamd://xxxxx:xxxx@<xxxxx.dyndns.org:10001:1803:00000 0/0102030405060708091011121314/[EMM]
#cccam
#card_server_url=cccam://<username>:<password>@<hostname>:<port>/<receive_emu_shared>/[EMM]
#tnk
#card_server_url=newcamd://<username_31>:<password_31>@<hostname>:<port>:0B00:000000/<des_key_14>/[EMM]
#
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
#
#1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
#1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards
#

[crabber]

Hello foggy, I used to use incubus with kathrein a long time ago, this is a later version than I have ever used but first you seem to have enabled two newcamd lines, is this the real address details? as if so i would edit them out asap.
The cccam server line (#card_server_url=cccam://<username>:<password>@<hostname>: <port>/<receive_emu_shared>/[EMM]
#tnk) isnt filled in so if you are trying to connect to cccam server this is why it doesnt work.

[foggy]

I have not put any newcs line in they must of been in the orginal

does the ccam it have to be at that point in the config? i have filled in the server line look at this point

########################### servers configuration ############################
[Servers]
card_server_url=cccam://user:assword @server.dyndns.org:12220

i also altered [Prov:000000:CaID:0000] section. To comment out (#) the doubled values

[crabber]

Yes M8 certainly in the older versions of incubus you needed both lines configured.
So I would try unhashing and filling in this line as well:
#card_server_url=cccam://<username>:<password>@<hostname>: <port>/<receive_emu_shared>/[EMM]
#tnk
Also if you are not using a newcamd server then I would hash out the newcamd lines to stop incubus trying to read them.

[crabber]

As you had made me curious about this I dug kathrein receiver out of the cupboard where it has been for several months and installed an E2 image with incubus 0.94. I think this is supposed to only have support for your box but still works on kathrein.
I changed two cccam lines, one beginning:
cccam://<username_20>:<password_32> etc
and the other:
card_server_url=cccam://<username>:<password>@ etc
rebooted and it worked, even gives ecm information.
One other thing which may not apply to your box, the F line in the cccam server needs to be just user and pass with no restrictions.