CCCam 2.1.3 out

[Dean sat]

You need to add boxkey in CCcam.cfg.

For DM internal reader:

BOXKEY: /dev/sci0 xx xx xx xx

All the best Dean.

[enrico001u]

is there a version for nabilo images or is there a way to install tar.gz?

Anyone have this working on nabilo?

[loveman]

tried the addons server?

[enrico001u]

yeah mate tried them not there at the moment
Also tried install zip version with barry allen but then system crashed and wuld not re-boot!

thanks for suggestion though

[raul]

........... just replace the old mips binary manually , until it appears
on the server .

/usr/bin

[Stev0]

i heard it melts your card if you put it in the dm800 internal slot. any confirm it doesnt???

[enrico001u]

does this update the entitlements??
Has anyone recieved emms using this??

[canthackit]

cant get it working on Nabilo.

but got it working on GP2

card not melted yet :D

but cant seem to get CCcam info to work (strange):iagree:

all in all it clears very quickly, works on $$$.de and D+ not tried any others as of yet.

regards: canthackit

[enrico001u]

What settings did you change??
just the box key? was it diferent to the one in newcs or same?

thanks

[canthackit]

No same boxkey.
GP2 4.50

regards: canthackit

[bazzagordon]

Working fine for me dm500 e1

1. Removed old version of cccam

2. download new bin

3. added cccam.cfg

All working fine

Thanks Sonic

[safcsat]

what do u put in for the boxkey line if we use a omikey reader?

in newcs i had type pcsc

**edit*** seems cccam doesnt support pc/sc boo :(

[enrico001u]

ok

A few questions We might find useful

1 - does card update? has anyone recieved an emm??

2 - Is it ok in DM800 internal reader? how warm? what frequency?

3 - my ecm's have gone up to 0.160 compared to newcs 0.080 is this the same for everyone??

Thanks guys

[canthackit]

@ Sonic1

downloaded the 213 complete loaded my own .cfg white card clearing :respect-055:

thanks mate well done, Yo Da Man:respect-040:

regards: canthackit

[canthackit]

ok

A few questions We might find useful

1 - does card update? has anyone recieved an emm??

2 - Is it ok in DM800 internal reader? how warm? what frequency?

3 - my ecm's have gone up to 0.160 compared to newcs 0.080 is this the same for everyone??

Thanks guys

1: Yes
2: No, but then i've got a fan on mine (DB that is)
3: No the same about 160

regards; canthackit

[sonic1]

Just giving sonic feedback on his emu,since this is the only place he put it and wanted feedback.

Benge.

Correct Benge and the package is for all Nabilo E 2 Images

[Stev0]

DM800 installed FULL COMPLETE from Nabilo server.

uploaded my own cccam.cfg with BOX KEY. works fine and cccaminfo works too.

Thanks again Sonic1

[enrico001u]

for those who would like to overclock this might be useful

just overclocked card to 720mhz in debian with smargo.

Running really stable and cool

ecm 0.110



No no good at that frequency became unstable when more than 3 peers connected ecm's rose to 0.900

[enrico001u]

Im trying to recieve emms in debian not sure if its setup correct

I have enabled emms
I have extra emm level yes
and I have F: 2 1 1 { 0:0:2 }

Is there any other settings that need to be changed??

anything need to be done with cline??

thanks in advance

[sonic1]

Im trying to recieve emms in debian not sure if its setup correct

I have enabled emms
I have extra emm level yes
and I have F: 2 1 1 { 0:0:2 }

Is there any other settings that need to be changed??

anything need to be done with cline??

thanks in advance


That looks fine so keep an eye and see if any EMM's come through.

[enrico001u]

left overnight and nothing yet as soon as it updates I shall post again

handled 8845(8838) ecms and 0(0) emms
Nds card 2****d4

[enrico001u]

Excellent entitlements updated in debian with smargo and extra emm level


handled 13482(13462) ecms and 1(1) emms
Nds card 2****d4

Entitlement info
1cc7 47-08-2009
7be1 62-08-2009
003 16-01-2010
00b 16-01-2010
0010 16-01-2010
001d 16-01-2010
30e1 16-01-2010
30e2 16-01-2010
30e3 16-01-2010
30e4 16-01-2010
30e5 16-01-2010
b732 16-01-2010
b736 16-01-2010
b73b 16-01-2010
b765 16-01-2010
b766 16-01-2010
b772 16-01-2010
b773 16-01-2010
b846 16-01-2010
b860 16-01-2010
b8d2 16-01-2010
b991 16-01-2010

[Stev0]

I think it was a small glitch with the server, try again.

i had the same problem. i downloaded full 213 and it worked a treat.

currently getting 0.108 ecms overclocked to 6800000.

[enrico001u]

just wondering what people think about below

with nds3 uk how many users using card at the same time without becoming unstable on average I have 15 clients in server but only 3 - 4 use at same time could I afford to go with more?

thanks

[sonic1]

i had the same problem. i downloaded full 213 and it worked a treat.

currently getting 0.108 ecms overclocked to 6800000.

The overclocking info is very useful, thanks Stev0:respect-048:

[neil306]

hi all thanks for the excellent info so far
i have card working fine in dm800 but i am not receiving any emms, so no card update as yet.
has anyone got a working config for this to get my card to update i have allowed emms
thanks in advance
neil

[enrico001u]

If you have allowed emms then they will come it now all updates with just 1 emm in my experience so far I get 1 emm every 12hours or so!

just be patient mate

[oldfart]

OK - how to remove old CCcam??
file is /usr/camd/cccam_2.1.1
the scripts in the zip file in the upload section don't reflect this version ....
(had a thought) - could use CCcam info to stop the cam, then just delete the file ??

[harshy]

what image are u using?

In Nabilo you can uninstall CCCam from the uninstall panel.

[wallycharlo]

I know it's a little off topic as this is a Dm800 thread ...

... but can someone tell me does this mean that the new white card can now be used directly in a dreambox (say dm7020) cardreader and will work ? without overheating etc ?

cheers

-Wally

[oldfart]

what image are u using?

In Nabilo you can uninstall CCCam from the uninstall panel.

OoZooN

[sonic1]

I know it's a little off topic as this is a Dm800 thread ...

... but can someone tell me does this mean that the new white card can now be used directly in a dreambox (say dm7020) cardreader and will work ? without overheating etc ?

cheers

-Wally

Yes

[oldfart]

Disabled auto startup of old version of CCam (2.1.1) which is in /usr/camd/
stopped CCcam 2.1.1
Installed CCcam 2.1.3 (installed in /usr/bin)
It works, but only for non-premium channels, can't get any of the movie channels
Any ideas anyone??

DM8K - OoZooN

[sonic1]

Add your boxkey to CCcam.cfg It is the same as the one you used with NewCs

[oldfart]

Add your boxkey to CCcam.cfg It is the same as the one you used with NewCs

Never used NewCS
yes - boxkey added
The strange thing is - CCcam clears non-premium channels with the white card in either slot!

[sonic1]

Why is that strange ?

The boxkey is only needed for premium channels so there is no reason why the card should not work in either slot.

[echelon]

a quick question re boxkeys addition

I have a boxkey of 8 hexadecimal characters , meaning there are 0 to 9 in numerical and A to F in alphabetical , and it is a mixture of the two

so if I added this boxkey is it added EXACTLY as per my boxkey details or is it converted into say a different number of characters or decimal format only ?

example is as such

A1B2C3D4

thats 8 characters , but I thought I saw some people mention 10 ?

and where exactly would I add this boxkey on the dm800 ?

is it in cccam or newcs ?

and is the default download of say cccam or newcs all that is required for this

thank you

[sonic1]

BOXKEY: /dev/sci0 00 11 22 33

So with your example echelon, it would be

BOXKEY: /dev/sci0 A1 B2 C3 D4

BOXKEY: <device> <byte1> <byte2> <byte3> <byte4>

The line can be added anywhere in your CCcam.cfg and if you have a look at the default cfg with 2.1.3 you will see the same info I posted.

Newcs is no longer needed as long as you box reads cards directly with CCcam so your DM800 would be fine.

I think your TM needs NewCs to read the card so you would still need Newcs 1.67 with CCcam but I may be wrong.

[echelon]

does this apply to both colours or just the white one ?

ie:- does either work just the same ? using the same cccam and cfg file etc ?

[sonic1]

Boxkey only need for the new white card 0963 old blue card 0961 works the same way it always did.;)

[oldfart]

I had make an error in the BOXKEY - all working now.
Luckily, I found a program on another forum NDS Box Key Generator, that allows you to enter either the box serial number from the Services menu, or the 17 digit number on the bottom of the box.

[karlpowell]

anyone else having problems with the card dropping the emms

IE... ecm 155(0) emm 1(0)


this is a card that has not been in its official box for a while but has the family package sub

Karl

[yorike]

CCcam 213 works like a charm in Nabilos bh12 just added the boxkey and after 30 sec the channels cleared on **east

[karlpowell]

Hi Yorkie long time no speak .... if you check the entitlements of the card is it taking the EMM's ?


IE ECM 12(12) EMM 2(2)
or like mine , which looks to be dropping the EMM's
ECM 12(0) EMM 2(0)

[SATAlite]

Mine also not updating.
963 card clearing basic package under CCcam 2.1.3 but no update.
I have an empty .cfg and no boxkey required....strange.
961 updates OK as it did under 2.1.2 with entitlements up to mid Jan `10.

......Any ideas?

[enrico001u]

Try this paste it in your cccam.cfg
And replace ** ** ** ** with your boxkey

Cos mine has updated fine 963 card now til 16/01/2010




SERIAL READER : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
BOXKEY: /dev/sci0 ** ** ** **

SHOW TIMING : yes
DISABLE EMM : no

[SATAlite]

Thanks for that enrico,

I understood a boxkey wasn`t required for basic sly package
Also, card gets no warmer than in the digibox so freq should be OK.
Nevertheless, I`ll give it a go.

[oldfart]

Hi Guys,

Sorry if this is a stupid question - but how do you go about finding your boxkey?

Thanks :)

No one here is writing any tutorial, so:-
_http://www.satellites.co.uk/satellite/dreambox-general/150640-testing-new-white-sly-uk-card-caid-963-a.html
post No.17

there is also a box key generator on that site, I used (see few posts above here - it works!)

[sonic1]

Hi Guys,

Sorry if this is a stupid question - but how do you go about finding your boxkey?

Thanks :)

Stick old blue card in box and start CCcam via telnet
You will see your boxkey.
It is the most accurate way to obtain your boxkey

[froggie]

Hi guys
i installed cccam 2.1.3 on my 8000 and added boxkey all ok and working,
but i have been told by a m8 not to use cccam as card will run hot, checked my card and it wasnt hot, but to be safe i went back to newcs can any body confirm that its ok to use cccam or as any body add any problems.
cheers dave

[wallycharlo]

Hi guys
i installed cccam 2.1.3 on my 8000 and added boxkey all ok and working,
but i have been told by a m8 not to use cccam as card will run hot, checked my card and it wasnt hot, but to be safe i went back to newcs can any body confirm that its ok to use cccam or as any body add any problems.
cheers dave

This new version of CCcam is fine regarding heat.

-Wally

[paul01609]

mines been in my 8000 for 2 days now and is not hot,2/2 emms its showing entitlement 17/1/2010

[wallycharlo]

Migth be an idea to delete all other versions of CCcam from your box though? ... eg if one started version 2.1.2 in error instead of 2.1.3 one could fry the card ?

-Wally

[slime]

Thanks - seems to be working now on 963 with 213 but 0/0 EMMs as yet and so entitlements still showing only as Dec 2009. I didn't do anything special in the CCcam.cfg regarding clock speed - left it alone. Is this OK?

[enrico001u]

yeah usually only get 2 emms in 24hours best just leave on 1 sky uk channel and wait just be patient should update.

P.S. 1 emm now updates the whole card!

[Dreamlife]

How do I install cccam 2.1.3 manually on a TM9100s? I am confused as to where the files go.

[sonic1]

Which image ?

[Dreamlife]

Which image ?

EDG Nemesis 4.2.

It's not on the blue panal.

[minx]

I hope I'm not going off topic but I tried to install CCCam2.1.3 from the server but cant uninstall the old version. go to Uninstall, select CCCam 2.1.2 but its still there after I reboot. DM500s clone.

Any idies?

[enrico001u]

same problem here I just left it there and use 2.1.3 instead.
Does no harm

[SATAlite]

Phew !!

Just caught it`s first EMM, updated to 19/1/2010

[Jono]

How do I install cccam 2.1.3 manually on a TM9100s? I am confused as to where the files go.

i would like to know the same i have UR23 running in 9100 but there is no cccam213 in blue panel only cccam212 so were could i downl;aod it and were in the reciever do i ftp the files over to.

appreciate all help

cheers

Jono

[sonic1]

The very easy way is to download CCcam 2.1.3 and find the ppc file
rename it to CCcam_2.1.2 and just replace your existing file in var/bin

php info will confirm your change, make sure you stop 2.1.2 from running before you replace it.

[rigsby]

My DM800hd seems very slow since installing 2.1.3 especially when looking at the cccam info pages.

Anyonelse having slow responses from the dm since the new Cccam ?

cheers

[sonic1]

My DM800hd seems very slow since installing 2.1.3 especially when looking at the cccam info pages.

Anyonelse having slow responses from the dm since the new Cccam ?

cheers

Nope, I can see no difference at all, I also can no see any reason why your choice of emu should slow your image :confused:

[enrico001u]

strange problem here may be related

dm800 works fast as always!
But I notice when I refresh my cccaminfo from pc my ecm times rise and I get a freeze but only when I refresh info !

Dm800 - clone - bh12 - cccam 2.1.3 - nds3 uk

[rigsby]

DM 800 appears to have speeded back up again.

Did a few re-boots & now seems to be running ok for now.

cheers

[yesfan]

Working ok here with 2.1.11, 2.1.2 and 2.1.3 installed.

Can the emm's be updated by a client, i.e. if card is in a server, or has it got to go into a box with a feed?

[enrico001u]

can update by client mine do!

[echelon]

I have put the blue card in my dm800 running nabilo 0.11g2 and downloaded the new cccam 2.1.3 from the server and the card clears using the default config ( as it should do ) and I can see the entitlements ok in cccam info ( dec 2009 at the moment )

what I am wondering is can I use the web interface to look at these entitlements like you can do in the newcs panel ?

in other words can I view these entitlements from my pc instead of having to go and check cccam info on the actual box ?

this would mean I can check if they have updated from my pc

thanks

[sonic1]

192.168.0.2:16001

Example of your box ip and the default webinfo port unless you have changed it.:respect-054:

[echelon]

thanks for that web address info , worked a treat :)


Try this paste it in your cccam.cfg
And replace ** ** ** ** with your boxkey

Cos mine has updated fine 963 card now til 16/01/2010

SERIAL READER : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
BOXKEY: /dev/sci0 ** ** ** **

SHOW TIMING : yes
DISABLE EMM : no


ok , I have done the above on my dm800 box running nab0.11g2 from stick with oozoon in the flash , and my expirys on my old blue card were december 2009 last night as follows

card reader /dev/sci0
handled 540(538) ecms and 0(0) emms
blue Nds card 1****a

Entitlement info
00b 09-12-2009
001d 09-12-2009
b766 09-12-2009
b765 09-12-2009
b772 09-12-2009
b773 09-12-2009
b860 09-12-2009
b8cc 08-12-2009
b8cf 15-12-2009
003 09-12-2009


got up this morning and have lost several of them and the card has not updated either , and it looks like the free to view ones are missing for ch5 , fiver , 5usa , sky3 etc as well

this is the current info

card reader /dev/sci0
handled 25(13) ecms and 1(1) emms
sid limit: 30
assigned sids: f23, 125f, 13ef, 1d51, 1e14, 1e15, 1e1e, 1e1f, 1e23, 1e24, 2f08
Nds card 1*****a

Entitlement info
b8cc 08-12-2009
b8cf 15-12-2009

so it appears they may be knocking off this card ?

I have another blue card in my tm9100 that doesnt update and it seems ok as follows from newcs

Entitlements for card 0
.--------------------------------------.
| Provider | Expiry date | Expiry time |
|----------|-------------|-------------|
| B860 | 2009-12-07 | 16:00:00 |
| 001D | 2009-12-07 | 16:00:00 |
| B766 | 2009-12-07 | 16:00:00 |
| B765 | 2009-12-07 | 16:00:00 |
| B772 | 2009-12-07 | 16:00:00 |
| B773 | 2009-12-07 | 16:00:00 |
| 000B | 2009-12-07 | 24:00:00 |
| 0003 | 2009-12-07 | 24:00:00 |
| B8CC | 2009-12-09 | 24:00:00 |
| B8CF | 2009-12-12 | 24:00:00 |
| B8CE | 2009-12-09 | 24:00:00 |
'--------------------------------------'

I have not tried my new card yet , that is in its proper box


just wondering if the problem with the blue card in the dm800 is my error or not ?

if it was my error I would have thought the free to view entitlements would still work ?

and is the number of sids ok or is there something else that needs altering ?

nb:- this card only has 2 mixes on it , so its not a full package before anyone asks

thanks

[sonic1]

The cards are being killed off thats for sure, to prolong the life you need to add blockers to your CCcam.cfg
if you have a look at the default blocker line in the cfg you just need to add 07 at the end.

[echelon]

The cards are being killed off thats for sure, to prolong the life you need to add blockers to your CCcam.cfg
if you have a look at the default blocker line in the cfg you just need to add 07 at the end.

thanks for that

have now added the following into the cccam cfg files ( mine is switched )

#
#blocker is 07 on the end
B: /dev/tts/0 07


so hopefully 2 things will now happen

1) the old blue card will keep these last 2 entitlements running

2) I would hope the dates actually update to january 2010 , although I doubt it myself

[sonic1]

thanks for that

have now added the following into the cccam cfg files ( mine is switched )

#
#blocker is 07 on the end
B: /dev/tts/0 07


so hopefully 2 things will now happen

1) the old blue card will keep these last 2 entitlements running

2) I would hope the dates actually update to january 2010 , although I doubt it myself
You need to change it from
B: /dev/tts/0 07

to

B: /dev/sci0 07
As I am assuming you have the card in the internal reader?

[echelon]

You need to change it from
B: /dev/tts/0 07

to

B: /dev/sci0 07
As I am assuming you have the card in the internal reader?

yes it is in the internal reader :)

ok thanks , was just using the example in the actual file , and nothing has changed when I check it in the web interface

so will alter it to your post now

thanks again

[echelon]

changed those details but the old blue card now has no entitlements so may have been too late to stop the rot :(

[007.4]

They are certainly switching off the old blue cards. The fuse byte gets changed from 25 to 24 and the entitlement tiers are zeroed. This has being going on for at least three days now. :(

[bobothebear]

Ahhh Crap :(
Mine has entitlements till about 20th December so looks like I won't get anymore life out of it after that.

[neil306]

Updating entitlements white cards.

I managed to force an update on my whitey using dm 800 internal slot
It had not updated since changing to 2.1.3 and was left in for 4 days.

I kept checking entitlements in cccam info but was stuck on 11.12.2009.
The card was not updating in original box either.

I put stb on ra*ing uk which i do not subscribe to, but recieve from a friend, and the card updated straight away to 14.01.2010 I have my fline set to allow emms from friend.

Hope this helps those who have had no updates yet
neil

[scoobydoo]

i am trying to get my serial cryptic phoenix to read the white card but no joy.can anyone see anything wrong with my cccam.cfg.

#SERIAL READER : /dev/tts/0
#BOXKEY: /dev/tts/0 11 11 11 11

#SHOW TIMING : yes

#DISABLE EMM : no


thanks.

[sonic1]

I am not trying to be rude but you have removed the # from all the lines in your actual cfg ?
# in front means disabled.

[scoobydoo]

no the # are all still there.shows how much i know.thanks sonic1 i will try again.

[gartner]

Hi!

I'm a little confused.. I have a DM 800. Will the new white 963 card work in internal slot. Or do I need a Smargo attched?

[sonic1]

Card works perfectly in the internal slot, the only thing you need is your boxkey.:respect-051:

[gartner]

nice..

so only thing I need to add is
BOXKEY: /dev/sci0 xx xx xx xx ??

No clockfreqensy or something like that needs to be added? ...

[loveman]

u can add the clock frequency, but it works pretty well as a standard to what you get out the box...

[jimrare]

nice..

so only thing I need to add is
BOXKEY: /dev/sci0 xx xx xx xx ??

No clockfreqensy or something like that needs to be added? ...
It is useless to change the clock frequency for the internal reader, as it is fixed. You change the frequency only if the device reading the card supports overclocking (using an external card reader for example which supports more frequencies)

[cyber_mmx]

Hi,

i am trying to update my SKY UK (0963) card with CCcam 2.1.3 but no success!
Whole night my card is in DM800 and on SKY ONE!
But nothing happens!

In F line i put

F: user pass 1 0 1 { 0:0:1 }

my Entitlement info says that card expired 1-12-2009

handled 13025(3025) ecms and 0(0) emms

Any idea!!!??

Regards

[karlpowell]

leave in card reader looks like the card has not had an emm yet

[cyber_mmx]

Right now my card is updated

ecms and 1(1) emms

20-01-2010

:)

Cheers

[Timmy]

I think this is the right thread, I have read a number of other threads on this but just wanted to check and be 100% - I am safe to put my wite card in my 7020 aren't I?

[sonic1]

I think this is the right thread, I have read a number of other threads on this but just wanted to check and be 100% - I am safe to put my wite card in my 7020 aren't I?

100% safe with 2.1.3, internal reader and correct boxkey. :respect-051: