gibertini 1.2 & moteck motor problem.

[nml]

As you know the dish mounts on the moteck from below problem is with the gibertini 1,2 there is part of the dish at the top of the mount that stops the dish from being bolted to the motor arm . Any ideas ?

nml

[AM556]

Is this your dish in Spain? Has something changed in your setup?
Are you able to drill and bolt one of the U bolts in a different position?

[nml]

In Spain at the mo and yes a change in setup, just installed a Gibertini 1.5 on a ground mount for 28 east and using the 1.2 with a moteck motor i bought a couple of years ago.
I think i can solve the problem with a bit of angle bracket in between motor stub and dish bracket should just gives enough clearance.

I hope.

nml

[burridge]

I had the same problem trying to fit 1.2 gibertini to a dark motor, had to use some packing between motor arm and bracket, have since taken it down because of the weight of the dish about 23 kg to heavy for a diseqc motor