704 TM-6900 HD Combo Super

[Giga]

704 TM-6900 HD Combo Super firmware (https://www.satpimps.co.uk/showthread.php?t=122974) <= click here for the firmware

straight from the technomate website!

To activate and de activate RF out menu/system setting/frontpanel display/select normal or power save { normal=RF active }
front pannel display fixed
in av output Radio background off/on.


Use this software by rs232 only when front panel displaying Technomate
DD+ FIXED (Dolby Digital+)

please note: this is not a patch

[Giga]

seems you can now switch off the UHF distribution when viewing programs you don't want to have on the other TV sets
you can now swith off the AV background while listening to the radio
DD+ fixed (dolby plus fixed)

load the software by USB and only by RS232 if the Technomate stays on the front display <= seems to be verry important!

[Giga]

To activate and de activate RF out menu/system setting/frontpanel display/select normal or power save { normal=RF active }
frontpanel display don't find these settings? Only:
Blue Light: on/off
Text Moving: on/off
Channel Number: on/off

RF: don't switches off

[DJ2004]

Is it possible to install this firmware and then install the Magic patch over it?

[Giga]

yes

[Ghoulie]

put the official 704 firmware on mine only - relying on Diablo for decryption - just did upload from usb stick

seems to behave much better now - previously had problems trying to add new tp then do scan - switched off when trying to add the tp number as soon as you pressed 1. Problem gone with new official firmware

[descati]

Helo Giga
is it usefull to load the 704 firmware,and then put the newest patch afterwords??

have also problem with 10° watching FTV HD ,freezing images,do you have explanation?? using diablo 2 cam and uw 187?and power cam for c"""dig
off.card,when extracting the cam's ,picture becomes normal
please comment.
Regards ,an thanks for the many helps already given.

[Giga]

The idea behind it is that some parts are not changed by the patched software, can not confirm this. I would install the 707 official, found on their website.
And then depending the need and priorities on what should open:
Either run the TM patched or unpatched: depends on what cards should open and what you want to record.
Don't know much about the diablo's so no much experience on these.
But as I understand the diablo and the programming possibilities you should be able to remove or block processing that is already handled by the the TM6900 HD super (patched or not patched) this should eliminate conflicts in encryption.
K a b e l D e u t s h l a n d is handled by Technomate you should remove any reference in diablo to this package.
And only set encryptions for packages not handled by the TM6900. If this is possible.

If diablo users can confirm there is way in setting up diablo only will look for certain packages to decode (include/exclude list) (perhaps using Fausto to adapt the .bin?)

Other considerations:
slot usage of cams switch them from position?
when cams are in use, don't close the door (cooling)
when picture freezing occurs are the cams hot? see if additional cooling helps. have ventilator blowing cool air over the technomate? see if that helps?

FTV HD on 9°E 11881 V 27500 FEC 2/3 dvb-s2 8psk runs indeed without problems.
rumor has it that a 707p release would be imminent?

PS. 7100 HD has two card readers (going by the menu screen shot), have this confirmed if ordered.