CCW's +tm6900hd super

[joany]

Could someone please tell me how to add these. Also, do they reside on the tm6900 or the diablo cam.

I did look for this info. but couldnt find any sticky posts.

thanks in advance.

[Giga]

CCW's can be entered in the B I S S section see 8 2 8 0 (https://www.satpimps.co.uk/showthread.php?p=643019) (<= URL) these are treated the same. Disadvantage you have to do these manual with the remote, if you can have those loaded on the diablo that would be an advantage. I don't know if that is possible?

[joany]

thanks giga

[joany]

I'm a bit confused. i did the first bit where you add the key in the 8280 part (where there are 40 lines) but I cant find a cas for bis/ccw in the second part?

[mister-t]

its far easier to use fausto and vplug with ssp,give it a try works perfect

[joany]

I have dl'd fausto. where is vplug and ssp. isnt ssp a sharing prog??

[mister-t]

look in skystar section for vplug,put everything in fausto emu plugins
yes fausto is ssp if you have that connected

[dxman]

8280 put the country western codes and worked ok so no need to add diablo
tnx for the info giga

[Giga]

I'm a bit confused. i did the first bit where you add the key in the 8280 part (where there are 40 lines) but I cant find a cas for bis/ccw in the second part?
go on the encrypted channel
select a (unused/no longer valid) line to put the k e y in
when you have finished input: exit and confirm save
channel should open: no cas to select, by inputing the line while viewing the scrambled channel this info is linked to that channel or provider.

[holmroad]

Thanx again Giga - 8280 piece of cake, but think latest CCW keys down again now anyway?:bravo-009:

[dxman]

theme x not working
triple x ok

[Giga]

Thanx again Giga - 8280 piece of cake, but think latest CCW keys down again now anyway?:bravo-009:

most b i s s and c c w are short lived mostly only 24:00 hours or less.
key discovery > forwarding and propagating key through internet

[Giga]

I have dl'd fausto. where is vplug and ssp. isnt ssp a sharing prog??
don't know about vplug? Simple Serial Sharing Protocol with null modem cable from main menu > Installation > Option > Serial Mode: on/off. Think all AU left in off. Used to share c a r d from server

[mister-t]

with ssp all you are doing is using the vplug and fausto from the pc
fausto runs on pc and channel opens

[dxman]

there must a problem with the latest patch soon you change channel just get a scramble channel again and the last two digit from the code change from 00 to 75[that's the reason you get a scramble channel],by pressing 8280 again correct again until turn the receiver off or changing channel, i got so p off at the end done the cw on the diablo at list is stable
anyone else got this problem?

[joany]

I realise i'm being a bit blond here but I just cant seem to get it to work. I know i'm labouring it a bit but I don't want to ask the same question in 3 months time, the next time a bunch of ccw's are uploaded to the forum.

so
1. from 8280 I can add the keys ok in the first part
2 by pressing mute/exit a new menu appears. I tab across right until an empty box appears (on mine it is 29)
3. i then tab down and I MUST select a cas because i can't go any further until i select one.
4. IDENT? where do I get this from is it the first 4 numbers on the camd3 keys(so for example):
Constant CW XXX Xtreme 13.0E 18.01.2010 2nd

XXX Xtreme (13.0E) Viaccess in HEX: 05 8B 4D DD E6 B2 DD 00 05 8B 4D DD E6 B2 DD 00
XXX Xtreme (13.0E) Viaccess in DEC: 005 139 077 221 230 178 221 000 005 139 077 221 230 178 221 000

XXX Xtreme (13.0E) Irdeto in HEX: 05 8B 4D DD E6 B2 DD 00 05 8B 4D DD E6 B2 DD 00
XXX Xtreme (13.0E) Irdeto in DEC: 005 139 077 221 230 178 221 000 005 139 077 221 230 178 221 000

XXX Xtreme (13.0E) Conax in HEX: 05 8B 4D DD E6 B2 DD 00 05 8B 4D DD E6 B2 DD 00
XXX Xtreme (13.0E) Conax in DEC: 005 139 077 221 230 178 221 000 005 139 077 221 230 178 221 000

XXX Xtreme (13.0E) Nagra in HEX: 05 8B 4D DD E6 B2 DD 00 05 8B 4D DD E6 B2 DD 00
XXX Xtreme (13.0E) Nagra in DEC: 005 139 077 221 230 178 221 000 005 139 077 221 230 178 221 000


For camd3.keys (camd3.keys):
0500:00008C:0000000000:00:058B4DD DE6B2DD00058B4DDD E6B2DD00 ; XXX Xtreme (13.0E) Viaccess
0628:00008C:0000000000:00:058B4DD DE6B2DD00058B4DDD E6B2DD00 ; XXX Xtreme (13.0E) Irdeto
0B01:00008C:0000000000:00:058B4DD DE6B2DD00058B4DDD E6B2DD00 ; XXX Xtreme (13.0E) Conax
1803:00008C:0000000000:00:058B4DD DE6B2DD00058B4DDD E6B2DD00 ; XXX Xtreme (13.0E) Nagra


eg for nagra is it 1803

5. i enter the rest of the keys in 2 parts, labelling the first part (ident) 01 and the second 02.
6. i'm assuming the second part (last 4 boxes) are for key changes.

Once again I'm sorry for appearing dumb but as I said I don't want to have to ask the ame question in future and get flamed for it.

muchas gracias

[Giga]

I'm affraid you are mixing up two separate systems:
8 2 8 0 = biss or DCW

[m u t e] [e x i t] = Softcam, don't know if you can use cam3d k e y s in softcam?

from your example, looks like:
0500: coding used?
00008C: provider id?
:0000000000:00:
058B4DD DE6B2DD00058B4DDD E6B2DD00 k e y
; XXX Xtreme (13.0E) Viaccess

[dxman]

It doesn't matter now is gone,but does any one got the same problem as i had?
I'm not complaining is it me or there is a problem with the patch
i can put the codes ok but when you change channel the last two digit change
original 00-TO 75,it look if it doesn't save the change

[dxman]

I realise i'm being a bit blond here but I just cant seem to get it to work. I know i'm labouring it a bit but I don't want to ask the same question in 3 months time, the next time a bunch of ccw's are uploaded to the forum.

so
1. from 8280 I can add the keys ok in the first part
2 by pressing mute/exit a new menu appears. I tab across right until an empty box appears (on mine it is 29)
3. i then tab down and I MUST select a cas because i can't go any further until i select one.
4. IDENT? where do I get this from is it the first 4 numbers on the camd3 keys(so for example):
Constant CW XXX Xtreme 13.0E 18.01.2010 2nd

XXX Xtreme (13.0E) Viaccess in HEX: 05 8B 4D DD E6 B2 DD 00 05 8B 4D DD E6 B2 DD 00
XXX Xtreme (13.0E) Viaccess in DEC: 005 139 077 221 230 178 221 000 005 139 077 221 230 178 221 000

XXX Xtreme (13.0E) Irdeto in HEX: 05 8B 4D DD E6 B2 DD 00 05 8B 4D DD E6 B2 DD 00
XXX Xtreme (13.0E) Irdeto in DEC: 005 139 077 221 230 178 221 000 005 139 077 221 230 178 221 000

XXX Xtreme (13.0E) Conax in HEX: 05 8B 4D DD E6 B2 DD 00 05 8B 4D DD E6 B2 DD 00
XXX Xtreme (13.0E) Conax in DEC: 005 139 077 221 230 178 221 000 005 139 077 221 230 178 221 000

XXX Xtreme (13.0E) Nagra in HEX: 05 8B 4D DD E6 B2 DD 00 05 8B 4D DD E6 B2 DD 00
XXX Xtreme (13.0E) Nagra in DEC: 005 139 077 221 230 178 221 000 005 139 077 221 230 178 221 000


For camd3.keys (camd3.keys):
0500:00008C:0000000000:00:058B4DD DE6B2DD00058B4DDD E6B2DD00 ; XXX Xtreme (13.0E) Viaccess
0628:00008C:0000000000:00:058B4DD DE6B2DD00058B4DDD E6B2DD00 ; XXX Xtreme (13.0E) Irdeto
0B01:00008C:0000000000:00:058B4DD DE6B2DD00058B4DDD E6B2DD00 ; XXX Xtreme (13.0E) Conax
1803:00008C:0000000000:00:058B4DD DE6B2DD00058B4DDD E6B2DD00 ; XXX Xtreme (13.0E) Nagra


eg for nagra is it 1803

5. i enter the rest of the keys in 2 parts, labelling the first part (ident) 01 and the second 02.
6. i'm assuming the second part (last 4 boxes) are for key changes.

Once again I'm sorry for appearing dumb but as I said I don't want to have to ask the ame question in future and get flamed for it.

muchas gracias

hello mate it is very simple just stay on the channel that you want to view press 8280,find a line with all 000000000000000000000000
put new code via the RC or use the editor save the changes exit
when you done that if CW is still active you should get the picture
no good to try now ,because it's gone
good luck for next time

[dxman]

another thing mute exit is not the correct setting ,that section is only good for the key's for /seca/via and so on ,this setting is no good for CW or Biss
for that use 8280
that is why you are confused
regards dxman