PDA

View Full Version : hop1



bluenose50
29-01-2010, 11:34 AM
just tried several test lines all on hop 1 but hd channels are unwatchable constant freezing is this the norm or is freeze free poss on c/s

mrbleu500
29-01-2010, 11:36 AM
Check your ping rates, I'm getting freeze free HD channels on hop2

bluenose50
29-01-2010, 11:41 AM
ive tested my connectio with speedio and comes back as excellent is there something else i should be doing

sonic1
29-01-2010, 11:49 AM
Need more info, which provider ?

Which emu ?

Are you downloading anything ?

mrbleu500
29-01-2010, 11:52 AM
That's just going to check your speed, open a command prompt window and type:


ping cshost:port

to check the ping from your host to your system.

This is what I get:


Ping statistics for cshost:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 138ms, Maximum = 149ms, Average = 141ms

bluenose50
29-01-2010, 11:57 AM
i just get a black screen which closes straight away

bluenose50
29-01-2010, 11:58 AM
sorry info ccam
sly 1 hd
no downloads

mrbleu500
29-01-2010, 12:02 PM
did you OPEN a command window?

That's what happens when you just use the Run command

bluenose50
29-01-2010, 12:04 PM
so whats that cmd?

mrbleu500
29-01-2010, 12:07 PM
http://imgur.com/85Ctc.jpg

That's XP, don't know about Vista

bluenose50
29-01-2010, 12:09 PM
now i get ping request cannot find host

Giga
29-01-2010, 12:09 PM
first run CMD from the run command, this opens a dos emulation box or command prompt where you can enter that command. (C:\) Afterwards type exit to leave that window.

mrbleu500
29-01-2010, 12:15 PM
now i get ping request cannot find host

Is your cshost address an IP address [196.200.0.0] or named [myhost.yada.yada] ?

If an IP, use the [ping /a cshost] command to try and resolve the name, will check if dns is ok

Giga
29-01-2010, 12:15 PM
ping without the port number!
ping www.satpimps.co.uk

bluenose50
29-01-2010, 12:22 PM
its a named host address

mrbleu500
29-01-2010, 12:22 PM
ping without the port number!
ping www.satpimps.co.uk

Shouldn't make any difference, doesn't for me

bluenose50
29-01-2010, 12:25 PM
so what do i need to type in cmd prompt
iam typing C:\ping cshost:port is this correct

Giga
29-01-2010, 12:27 PM
Shouldn't make any difference, doesn't for me
when pinging here on xp home (dutch) with port number host is not found

mrbleu500
29-01-2010, 12:28 PM
its a named host address

If you have typed in the following aon the command line:


ping myhost.yada.yada

and it comes back cannot find host, it could mean the host is configured to disallow pings, and I'd be a wary of using this host as it is an important check tool for potential users.

BTW: If it's a test line, mail the host and ask for help ;)

Giga
29-01-2010, 12:28 PM
if your host is not found try without the port

mrbleu500
29-01-2010, 12:35 PM
when pinging here on xp home (dutch) with port number host is not found

Sorry m8, you are right. I'd forgotten I'm using an external dns server that always return a ping, even when not found.

:20:

bluenose50
29-01-2010, 12:39 PM
comming back with request timed out

Giga
29-01-2010, 12:41 PM
that host is no longer online or does not exist anymore.

bluenose50
29-01-2010, 12:47 PM
ccam info shows it as running

Giga
29-01-2010, 01:17 PM
try a freeware or shareware traceroute program like 3d trace route or similar.

mrbleu500
29-01-2010, 03:07 PM
Try pinging from the DM800 via telnet, and see what you get...?

kemik
29-01-2010, 03:10 PM
What image are you using?

If its Nabilo when you press the Ok button once you get the OSD, then press it again an diags info is switched on then you will see ECM time

I've noticed that if you ECM time is .8/.9 or above you picture will start to breakup/freeze and for HD it will break up about .4 and above.

So although the hop information is shown and of course always try to get 1 hop aware from your c/s then I find the ECM time is the best indication of whether that share is good enough or not

Hope that helps

bluenose50
29-01-2010, 04:12 PM
thanks the ecm times are a lot bigger than those you recomend
cant seem to find a provider with a decent c line thats why i iam reluctant to pay anyone know of of someone i can try
hope thats not against the rules

Giga
29-01-2010, 04:18 PM
google is your best friend in this case,

wallycharlo
29-01-2010, 04:19 PM
... you will get freezing even at hop 1 if the card is overloaded ...

-Wally

loveman
29-01-2010, 05:54 PM
Don't pay... End of.

If you have a card to share, you will have no problems getting a decent share. If not, then it will be harder, but you can probably still get a decent share. Go to a card sharing site (type in google - there's a european one that's quite good ;)).

There, you should be able to post to share to other people, or ask other people to share...

But as a rule of thumb, don't bother to pay anyone ... they get overloaded, and this results in a bad picture for you...

bluenose50
29-01-2010, 09:40 PM
thanks everyone for all the advice

billynw
30-01-2010, 11:45 AM
How is your dreambox connected to your router pal?


I had loads of problems with home plugs, spent hours trying to sort it out.
Hardwired it now CAT5E from box to router, now perfect.

As the guys said ping your dreambox to your router via telnet.

The problem could be your set up nothing to do with the outside world.

bluenose50
30-01-2010, 01:39 PM
how do i ping the box via telnet

mrbleu500
30-01-2010, 02:23 PM
Check the IP address of your box (Menu-> Setup/System/Network) it will be in the adapter settings. Alternatively, check the front panel on power up.

Next, you can either use the telnet command built into windows, or DCC to send the telnet command.

DCC will probably be easier for you, I've included it here as an attachment. Install it (extract to a folder, no install file) then run it and configure with your DM's IP address and user/pass if you have changed it, then go to the telnet tab and issue the ping command as described above.

If you can't connect via DCC then there is some problem with your setup.

bluenose50
30-01-2010, 02:31 PM
thanks i already have dcc running i dont know the command to send from the telnet panel

mrbleu500
30-01-2010, 02:45 PM
The same ping command used in windows;

ping cshost

ka004h9564
30-01-2010, 03:12 PM
Don't pay... End of.

If you have a card to share, you will have no problems getting a decent share. If not, then it will be harder, but you can probably still get a decent share. Go to a card sharing site (type in google - there's a european one that's quite good ;)).

There, you should be able to post to share to other people, or ask other people to share...

But as a rule of thumb, don't bother to pay anyone ... they get overloaded, and this results in a bad picture for you...

Dont bother mate,no one will give you a free share unless you have got a card to share.(tried it)
Ken.:o15:

snakie
30-01-2010, 03:28 PM
Just an addition,when ping dont work, try pathping ip.
Ex: pathping www.google.com

billynw
30-01-2010, 05:27 PM
Mate go DCC open telent then ping your router first of all.

In telnet type "ping routers ip addy", for me I type ping 192.168.2.1

This will tell you if you connection to your router is ok, before looking into the outside world or problems with your internet connection or c/s.

Like I said I had loads of problem and I was looking well to deep into the problem and in the end it was the home plugs.

Also how you connecting to your router with a ethernet cable or home plugs?

loveman
30-01-2010, 10:03 PM
Dont bother mate,no one will give you a free share unless you have got a card to share.(tried it)
Ken.:o15:

Well you obviously didn't message the correct peers. I have a few peers on my server who had no card when starting out. I had no card when starting out... There is a "free peers" section in most sites for a reason ;)