New Firmware Azbox-0.9.4466

[tsakman]

2010.02.05

azbox-0.9.4466-patch.bin

46.09 MB5405099286e88e0559cfe72b888df8c 3

photo pan + zoom in/out | fix srt timing issue | improved streaming

[xanadu]

| improved streaming


Hopefully streaming has improved on previously not working at all for most of us. :eek: :woot-035:

What is SRT?

[tsakman]

SRT is a subtitle format like sub

[tx0]

I 've downgraded to 4295.. haven't tried this 4466.
openxcas need to be rewritten that for sure.

will watch for reports

[Smudger]

I know this was in last version.
So, how does this work? or do I ned to read up about IPTV.
File EPG_SERVER.dat

[HX_EPG]
EPG_ADDR=kartina.pristavka.de
EPG_PORT=8083
IPTV_CH_VERSION=0

[Smudger]

Also


the OpenXcas restart '> >|' button is working in this firmware.

[T0rca1950]

Is it in anyway faster or more stable then that firmware from yesterday?

[dennisl]

If you look at a recording and a new recording starts then the playback stops. Has it always been like this for all fw released?

[denton]

Is it in anyway faster or more stable then that firmware from yesterday?

YES!
And OpenXcas menus are instant (ie. quicker than before)
.....................
Good work Opensat (I never thought I'd be saying that!)
Seems they've decided to pull their socks up finally....looking a lot rosier all of a sudden :-)


Observations on Elite model (so far):
> > (FF) / < < (FR) not working properly from TV mode/Recorded Programs
Search not working properly from TV mode/Recorded Programs

[denton]

I 've downgraded to 4295.. haven't tried this 4466.
openxcas need to be rewritten that for sure.

will watch for reports


It's fixed in this version.

[naporex]

Is it only me that in this FW screenshot grab isn't working?

edit:
it works but images are stored in: /DATA/hdb1/picture/
also when i upload an old channel list (fw 4295 for example) it makes totally mess in satlist (->0 E postions etc) not compatibile with new fw?

[goran]

Last 2 FWs gave me an error when trying to DL and install directly into the AZ HD, rather than do it via USB... Anyone else?

[Smudger]

Goran
do you have the correct address in the url as firmware default does not work requires 'http://fw.azupd.com/'
or is it some other error.

[Carp95]

Last 2 fw lost now/next EPG on Dutch provider overhere

[xanadu]

Last 2 fw lost now/next EPG on Dutch provider overhere


Did you reboot after?

I found the same problem on Sly Italia until I rebooted.

[denton]

Last 2 FWs gave me an error when trying to DL and install directly into the AZ HD, rather than do it via USB... Anyone else?

Yes, I confirm - I couldn't update via internet either > failed (download) at around 25%

[hfmls]

i had to use usb too

[@telesat]

Yes, I confirm - I couldn't update via internet either > failed (download) at around 25%

try this :
rm - rf /Download/patch*
then try update via setup menu

rgs,

[goran]

Good, I hope they know what to do now...

But why didn't they know it before they published it, if it was this simple [at least for them...]???:beatdeadhorse5:

[tx0]

this new version is unusable too. what I did:

- upgraded from 4295.
- downloaded "new openxcas"
- restored /PLUGINS from backup
- system restart

now I cant configure Multicas it hangs showing "Data loading"
ps x output shows running emu_module.

Any ideas ????

UPD: fixed

[goran]

Yeah. I had one. And I explained it in detail a little earlier, on a previous "new FW" thread. Guaranteed to work for anyone! Fully! I hope... ;) :D

I did try a few typical ways before that, on an earlier FW. It didn't work. But this one will!:coolgleamA: I'm almost sure... :D

[tx0]

finally got it running removing openxcas folder, downloading it once again from azboxworld and restoring from backup. dont ask me why. I dunno.. so weird.

[hfmls]

all good here.

streaming works.....other times it won't, oh well.

the rest, all good :)

[massimo1167]

So it's necessary to download new OpenXcas with last firmware?

[hfmls]

try it

[pegaman]

fw works fine with no glitches at all. new openxcas and multicas are faster and zapping is pretty good. Movies with DTS play ok ata last!!!

[MV_BEST]

good morning to you all.I don't have an internet connection,to plug the box.how do i download the new openxcas?Is there anywhere an executable file?thank you and sorry for my english..

[PieFacE]

Is no one else getting the "Data Loading" error on MultiCAS with this firmware upgrade?

[Smudger]

try deleteing the splitter.data file reboot and try before you use cccam.cfg to reload your settings don't send with Multicas edit

[PieFacE]

Excuse my stupidness... but where do i locate splitter.dat?

[PieFacE]

Ah got it!
Thanks for your help everyone, appreciated!
Me and this box do not have a healthy relaionship :( :P

[goran]

Am I correct in assuming that splitter data and txt files are created once you put in the data of your peers and card?

In which case, since you can not do it via remote ["Data loading..."], you may try doing that using telesat's MultiCASedit, as I described in "New FW 4461" thread... ;)

Good luck!

[jkont]

I had problems with mkv playback .
Audio not synchronized after a few minutes and...
...really bad picture quality compared with mkv playback from my Samsung 55u7000 LED TV (on the same file).

[medmed]

yes i confirmed that

[leerock]

sync problems here also

[halabessa]

Hi all,

Can confirm that zaping & CS w/Multicas & cccam client w/clines faster & stable..... even recording without any problem SD & HD.
It is really a step fw for opensat.
:respect-059::congratulations-008

[appc777]

Last 2 FWs gave me an error when trying to DL and install directly into the AZ HD, rather than do it via USB... Anyone else?


me2:18:

[hfmls]

yes, only usb works.

or go to DOWNLOAD folder via FTP and delete that file to see if it works after.

[samniotis]

sync problems also here on mkv and slow response of the remote control!

[Blisk]

Last two FW i can installed only by usb, and first I change name to patch.

[rocktheroad]

I have lost all satellite channels with this FW. I am maintaining my list only with AzBox, no external tools... and after setting Diseq 1.2 position for one satellite, everything dissapeared.... Of course, famous "Please Reboot" message was shown when I zapped trough channels and after reboot... nothing...

Strange thing is that DVB-c channels are there, and nothing happened to them. Also all channels are in their favorites lists, but you can't see any channel information (sat, freq, fec etc...) just their names.... All other lists are empty and also some satellite settings are changed to some ridiculous settings...

AzBox is connected to the UPS, and no power outages happened... Any had similar problems? I was upgrading from Fan on/off version, skipping one fw version...

[denton]

I have three sats using diseq and have had zero problems with this FW - previous versions really pi**ed me off with the "disappearing channel list" syndrome.

Denton

[simcan]

Streaming IP sticks now! May be this guys has started to listen to it's users, may be.

So if any one from opensat is reading, please please remove this annoying limitations on the Network/USB, that would make this box at least usable as a madia player, as it was advertised.