Funcard hex?

[red1]

Hi...Currently have a goldcard clearing sct no prob.. Just noticed there is a fun card hex clearing a few more as well...
download file and noticed there is only one hex... attempted to prog with mutiprog putting the hex in the flash and leaving the two eeproms blank..
Checked entitlements and it seems theres a problem??
Have i progged correct?
using elvis progger by the way
Thanx
Or have i got completely the wrong end of the stick here..doh

[wolves]

It seems you programmed correct as funvia.hex should be loaded to flash, so strange card is not working properly..

[red1]

Cheerz for the reply wolves..
Trying to read in dreambox 800 internal slot???
Don't need cam do i??

[raul]

funcard doesn't work in dm800 - silver card does if you want more providers than on the gold card .

there are emus out now supporting via2.6 , so you don't need the cards at all .

scam , mgcamd and cccam will do .

[wolves]

Just tested in dm7025 and as raul says not working in internal slot.
Working fine in x-cam though.. :)

Regards.Wolves. :respect-051:

[red1]

Gracias Raul.....

Thought it must be a reader prob..also tried in nokia 9800 with dedicated
viacess cam and still no good..
Noticed the latest cccam has emu support for via..
will give that a go..

Just something quite exciting lol about progging your own funs etc...(old romantic me damn ondigital.. lol) and seeing channels clear..

Thanx again amigo

[rkbuttoo]

which funcard file clears sct and others?I have tried to find??:respect-046:

[red1]

https://www.satpimps.co.uk/showthread.php?t=125170

[harshy]

i have cccam, where do I find this viaccess emu?

Thanks again,


harshy

[gerryl]

Ccam 2.1.4...with 'satankeybundle' ....:party:

[harshy]

ah right I see :)

OK, thanks again,


harshy

[harshy]

Ccam 2.1.4...with 'satankeybundle' ....:party:

Installed CCCam 2.14, updated Dreambox keys, but channels still open with cardshare?

[simford]

can a technomate open these channels?

[wolves]

@simford.

Here mate.. https://www.satpimps.co.uk/forumdisplay.php?f=40

regards. Wolves. :respect-051:

[dxman]

can a technomate open these channels?

yes with the latest patch 714p,no need a card

[007.4]

The lastest file for funcard "funvia2.hex" will work on an internal slot of dreambox 7000s using CCcam (2.1.2). But as stated you may aswell use the built in emulator of 2.1.4.

[raul]

yes , the atr was fixed - that was the problem with previous files .

[ian]

wont work for me using 2.1.3 in internal 7020 readers
but the goldcard is fine.ian.

[raul]

you have to use the latest fun files with fixed atr , works great on enigma1 .

CC*****2s| 500|viaccess |fff400,23b00,20810,20820,21110,2 1120

there are several other/older files that didn't work .

[007.4]

@Ian
Check you are using the new "funvia2.hex" file from 06/02/10 and not the one from January.
Also check you are not overclocking the slot. My tests show it will only work at 3.57MHz.

[abr]

The lastest file for funcard "funvia2.hex" will work on an internal slot of dreambox 7000s using CCcam (2.1.2). But as stated you may aswell use the built in emulator of 2.1.4.

i have read that ccam 2.14 cannot be installed on 7000s E1
have i read this correctly :confused:

do you have 2.14 on your 7000s
and which slot are you using with the funcard

btw i use mgcamd 1.35 on 7000s

[raul]

i use 2.1.4 on dm7000 , works just fine as does the fun card in any of the two slots .

[007.4]

I agree with Raul. CCcam 2.1.4 works fine on DM7000s. In addition there is even no need for funcard with this version (with the correct keys).

[abr]

thanks raul for the info on 7000s
i use nabilo darkstar II on usb
cccam 2.14 is not on the downloads via the yellow button yet and i did try unsuccessfully to load 2.14
after reading on other forums decided that it would not work on E1

[raul]

never used nabilo , but if it's not on their server just ftp to the box and replace the ppc binary - 2 minutes job and off you go !

[abr]

well i have now downloaded CCcam 2.1.4
and it is in the blue panel nabilosat darkstar II
and i have downloaded satanskeybundle 5.2.10
but sadly no picture :o16:

maybe it just won't work on the darkstar image

it is ok on 2.1.3 and also mgcamd 1.35

[A]

Is bis/absat working with any file ?

[raul]

no , there is a change in the ecm that requires a small fix to all emus .

i believe the omnia has a fix already out , others need to wait .

[sparky_dog]

Is bis/absat working with any file ?

Looks like it may be down, not working for me on Gold or Tit. :frown:


EDIT: Thanks for the info raul

[A]

ok down then

[trotwood]

ok down then
Art and jsc sport down also

[007.4]

Apart from SCT all the other previously open v2.6 providers are now using (non-public) key 09.