multi feed + 1 motor

[Giga]

as most of you know my setup was multifeed with DiSEqC 1.1 Switch 8/1.
I've now expanded this setup with a DiSEqC 1.2 motor.
Main satellite positions are on fixed multifeed LNB's.
One Triax TDS 110 was added with a Technomate TM-2600 super H-H motor.

TM-6900 HD Super > TM-2600 Super > EMP-Centauri P.168 V2 > LNB on dish with motor.

Have not tried using the 1.2 motor after the 1.1 switch, will try that when doing a further upgrade with a 4th dish and a 16/1 DiSEqC switch.

so if you have either a motorized dish or fixed multifeed, you can expand your viewing comfort: most viewed channels on fixed dish, lesser viewed satellites on motorized dish.

PS: don't know if this will work for other models and brands (STB & switch)

[Giga]

Main disadvantage having the above setup: when selecting the fixed lnb's the dish was also moving. So I spend some more time in the freezing cold and did some rewiring:
TM-6900 HD Super > EMP-Centauri P.168 V2 > TM-2600 Super > LNB. Glad to say this works, TM 6900 HD super send's the command in the just order:
DiSEqC 1.1 commands followed by the DiSEqC 1.2 commands.