PDA

View Full Version : NewCS help required


Smudger
14-02-2010, 09:46 PM
I'm having problems conecting Newcs to either mgcamd or multicas.

I get

[newcamd] unknown message from 127.0.0.1
[newcamd] Login to 127.0.0.1:21000 as dummy failed (25ms)

I'm using default settings to connect.


I read the docs and searched the board.

Also to note can't find Gorans help sticky on this board, but have read it on another.

Not sure which version on Newcs Im using got it from Terromans download site.


any help would be greatful.
sonic1
14-02-2010, 10:15 PM
I don't use Azbox but I guess it is no different to Dreambox

Show your newcs.xml with private data removed and your newcamd.list

These are for Mgcamd
Smudger
14-02-2010, 10:43 PM
CWS = 127.0.0.1 21000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan local
CWS_INCOMING_PORT = 21000




<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>upper</name>
<type>azbox</type>
<node>/dev/scard</node>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>No</blockga>
<newcamd_port>20000</newcamd_port>
<autosid>no</autosid>
<carddetect>yes</carddetect>
<priority>hard</priority>
<PTShandshake>no</PTShandshake>
<mhz>375</mhz>
<boxkey>00000000</boxkey>
<rsa>9ED52515321F04BCF7772151149D68951 54B559A8D825A4E7D711A9FAFD5C66BF6 4689501B254DF1832F754C21095379CF9 7B4E5BE6E0F1C9CEBF0A0E91D5ACD</rsa>
</device>
</readers>
<xmlserver>
<enabled>0</enabled>
</xmlserver>
<radegastserver>
<enabled>0</enabled>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>-1</ecm>
</cache>
<debug>
<darint39>sintoi51</darint39>
<level>internal</level>
<type>all</type>
<output>console, tcp</output>
<logfile>/tmp/newcs.txt</logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>172.16.1.1</udp_host>
<udp_port>9000</udp_port>
<udp_options></udp_options>
<tcp_port>1001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>local</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>127.0.0.1</hostname>
<port>21000</port>
</user>
</newcamd_server>
</newCSconfig>



as requested.
percivjr
14-02-2010, 10:51 PM
Change this:

CWS = 127.0.0.1 21000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan local

to this:

CWS = 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan local

assuming newcs and mgcamd are running on the same box.
sonic1
14-02-2010, 10:52 PM
CWS = 127.0.0.1 21000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan local
CWS_INCOMING_PORT = 21000




<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>upper</name>
<type>azbox</type>
<node>/dev/scard</node>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>No</blockga>
<newcamd_port>20000</newcamd_port>
<autosid>no</autosid>
<carddetect>yes</carddetect>
<priority>hard</priority>
<PTShandshake>no</PTShandshake>
<mhz>375</mhz>
<boxkey>00000000</boxkey>
<rsa>9ED52515321F04BCF7772151149D68951 54B559A8D825A4E7D711A9FAFD5C66BF6 4689501B254DF1832F754C21095379CF9 7B4E5BE6E0F1C9CEBF0A0E91D5ACD</rsa>
</device>
</readers>
<xmlserver>
<enabled>0</enabled>
</xmlserver>
<radegastserver>
<enabled>0</enabled>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>-1</ecm>
</cache>
<debug>
<darint39>sintoi51</darint39>
<level>internal</level>
<type>all</type>
<output>console, tcp</output>
<logfile>/tmp/newcs.txt</logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>172.16.1.1</udp_host>
<udp_port>9000</udp_port>
<udp_options></udp_options>
<tcp_port>1001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>local</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>127.0.0.1</hostname>
<port>21000</port>
</user>
</newcamd_server>
</newCSconfig>



as requested.
You need to match your ports ;)
Smudger
14-02-2010, 11:09 PM
still no good.

[newcamd] Connecting to 127.0.0.1:20000...
[newcamd] Connection to 127.0.0.1:20000 failed (85ms)

yes these are on the same box.
percivjr
14-02-2010, 11:33 PM
Are you sure that newcs is actually running?
Smudger
14-02-2010, 11:45 PM
yes I'm running from telnet session. might give up on this.
percivjr
14-02-2010, 11:55 PM
No, don't give up! This is not rocket science.

Kill newcs and mgcamd.

Start newcs in telnet. Then start mgcamd in separate telnet session.

Post newcs console output.
percivjr
15-02-2010, 12:14 AM
I'm off to bed now but I see that your necamdserver section is different to mine:

<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
<allow>lower</allow>
<allow>upper</allow>
</user>
</newcamdserver>
Smudger
15-02-2010, 08:34 AM
Changed to your settings

here are my results

MMP[newcs]$ ./newcs
Reading Config file from /var/tuxbox/config/newcs.xml
Reading Config file from /PLUGINS/OpenXCAS/newcs/newcs.xml
****** INTERNAL enabled
TCP-log password is disabled!
level: internal
type: all
output: console, tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
tcp port: 1001
TCP log options: level 16777215 type 255
[ 07:27:35 ] [ Box detect ] Box type 9
[ 07:27:35 ] [ Config ] hwkey not found !
[ 07:27:35 ] [ Config ] ekpair not found !
[ 07:27:35 ] [ Config ] /dev/scard ECM priority: hard
[ 07:27:35 ] [ Config ] No SIDFILTER is configured, disabling SidOverride for device 0 (upper)!
[ 07:27:35 ] [ Newcamd ] Server name : local
[ 07:27:35 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 07:27:35 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host 127.0.0.1, Port: 21000, Au: Off, Spider allowed: No, Sidoverride: No, reader control: No, level: 0
[ 07:27:35 ] [ EMM Cache ] Initialising Cache with 10 entries
[ 07:27:35 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2268
[ 07:27:35 ] Calibrating delay loops
[ 07:27:35 ] usleep(5) takes: 0 s 13 us
[ 07:27:35 ] usleep(10) takes: 0 s 16 us
[ 07:27:35 ] usleep(100) takes: 0 s 107 us
[ 07:27:35 ] usleep(500) takes: 0 s 875 us
[ 07:27:35 ] [ Loader ] Reader type 11 on node /dev/scard
[ 07:27:35 ] [ azbox ] Opening device /dev/scard
[ 07:27:38 ] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0
[ 07:27:38 ] ATR: 00 00 53 59 02
[ 07:27:38 ] [ ******* ] Atr header is 3F FD [INVERSE]
[ 07:27:38 ] parseAtr: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0
[ 07:27:38 ] parseAtr: 00 00 53 59 02 00 00 00 00 00 00
[ 07:27:38 ] [ ATR ] T=0 1etu=93.00us Guardtime:14etu WWT:57600etu
[ 07:27:38 ] [ ATR ] Historical bytes: 3 [B0] [0F] i [FF] J P [D0] [00] [00] S Y [02]
[ 07:27:38 ] [ ATR ] freq 1000000.000 sciFreq 3750000.000
[ 07:27:38 ] [ Loader ] Init NDS card
[ 07:27:38 ] [ NDS ] Sending to Card: D074018001
[ 07:27:38 ] [ azbox ] Delay is 24us
[ 07:27:38 ] write: D0 74 01 80 01
[ 07:27:38 ] [ azbox ] Timeout is 1428480us



MMP[mgcamd]$ ./mgcamd
tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:41)
[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: azbox
Conax.Key error 2: No such file or directory
Keys readed
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = dummy:127.0.0.1:20000 server newcs
newcamd keep alive: 0, incoming port: 21000
[OPENXCAS_API:Mon Feb 15 07:31:21.813] openxcas_open:285 ## mgcamd
[OPENXCAS_API:Mon Feb 15 07:31:21.827] load_xcas_control:98 ## loaded controller ID = 0x19760507
osdep_msq_server_open : key_request 0x54C4D100 key_response 0x54C4D101
key(54c4d100), msgflg(448)
key(54c4d101), msgflg(448)
osdep_msq_client_connect : key_request 0x54C4D100 key_response 0x54C4D101
[mgcam] emm thread started
[newcamd] Connecting to 127.0.0.1:20000...
[newcamd] Connection to 127.0.0.1:20000 failed (8ms)
digihoe
15-02-2010, 09:58 AM
I see you use scard... Does this mean you use NewCS 1.20 too? I think the new white NDS cards are only supported fully in the 1.67 version where you need an external reader... Also boykey is set to 00000000... Maybe this can be your problem?
sonic1
15-02-2010, 11:00 AM
still no good.

[newcamd] Connecting to 127.0.0.1:20000...
[newcamd] Connection to 127.0.0.1:20000 failed (85ms)

yes these are on the same box.


You need to change your ports to 21000 not 20000
Smudger
15-02-2010, 01:33 PM
Reinstalled newcs got it working

thanks guy's
digihoe
15-02-2010, 03:17 PM
Reinstalled newcs got it working

thanks guy's

Gr8! What version of NewCS did you use? Are there less freezing with NDS?
Smudger
15-02-2010, 04:46 PM
Gr8! What version of NewCS did you use? Are there less freezing with NDS?


1.6.13 downloaded via azboz downloads., Not tested it fully yet