New System probs

[falconxxx7]

hi all,
I have this system :
Dreambox 800HD
Technomate 2600 motor
1 meter dish with 0.1 LNB
image is 4.6 gemini (enigma)
i put the lattitiude at ~56 and long at ~356

i got the usals on and on sat finder in the menu options went to thor 2 ,
aligned the dish and am getting 58% SNR ,
When i look at the position of the motor is about 10 degrees , dont know if that's right or no?

I downloded a channel list from here Bishlist when I go to any thor channels no picture ,if i turn it back on the sat finder it still at 58% SNR.

If i go say to 28.2 degrees the dish turns but again no signal or channel shown
have i missed anything ?
ta

[luis88]

First off we dont know where you are so check your lat and longitude, use satsig or dish pointer to help you check this and then input into your usal settings. I don't have dreambox but most boxes use 3 or 4 digits ie 2.1 W 51.5N. West often shows up as a minus - . Try this and see how you get on.