View Full Version : MultiCas v1.62B-A07
Smudger
18-02-2010, 10:31 PM
Found this on another board.
MultiCAS
-DATE : 2010/02/18
-Version : v1.62B-A07
-----------------------------------------------
FIX : Fixed for S*y IT (Internal Card reader)
ETC : Several Bug Fix..
It's also in the Plugin downloads.
Smudger
18-02-2010, 11:43 PM
very stable with internal NDS card.
Switches without problems between local card and cs server with same caid for missing packages.
Before for me it always locked to the card having to remove card to connect to server.
digihoe
19-02-2010, 12:10 AM
I also see big improvment with NDS card, no freeze whatsoever (so far)...
Sat52
19-02-2010, 07:27 AM
Over an hour no freezing NDS:number-one-043:
Smudger
19-02-2010, 08:44 AM
I find with this release and previous the comand
INFO = /tmp/ccc_ecm.info
REFRESH = 3
don't work anymore is this the same for everyone.
valerica
19-02-2010, 08:51 AM
Info works for me . Via bug is still present : 2.6 like hd swiss don't work .
Cheers ,
Val .
medmed
19-02-2010, 08:52 AM
no for me is ok , it's work
pippopappa
19-02-2010, 08:54 AM
I find with this release and previous the comand
INFO = /tmp/ccc_ecm.info
REFRESH = 3
don't work anymore is this the same for everyone.
work for me, 10 seconds refresh
this version is not good for recording nds channels, some freeze.
playing the recorded file, for every freeze during recording, it skips forward lot of seconds :(
pppppp
fanoSat
19-02-2010, 09:40 AM
Yes NDS freeze continues... not only recording!
Try to watch the channel for 5 minutes: I count 1 freeze at least :o11:
denton
19-02-2010, 12:09 PM
Via bug is still present
Confirmed - many of the BIS.tv channels on Hotbird still not clearing with official card - M6, Chasse et Peche etc.
Yes NDS freeze continues... not only recording!
Try to watch the channel for 5 minutes: I count 1 freeze at least :o11:
Same here.
The new "C" version is a must. :respect-055:
marcinq76
25-02-2010, 02:23 PM
MOD : More improve about CCcam client mode for CCcam 2.1.4 ADD : Add support DT08 for Nagra (HD+ will be work) ADD : Add support about working together CCcam and Newcamd -- check the splitterdata.txt 'CCCAM NEWCAMD WORK TOGETHER = 0'
denton
25-02-2010, 03:29 PM
MOD : More improve about CCcam client mode for CCcam 2.1.4 ADD : Add support DT08 for Nagra (HD+ will be work) ADD : Add support about working together CCcam and Newcamd -- check the splitterdata.txt 'CCCAM NEWCAMD WORK TOGETHER = 0'
But still not clearing several Bis.tv channels (Viaccess-Hotbird) with an official card :-(
Anyone know who I can send this bug to...ie. who is Multicas developed by?
Regards,
Denton
killerno
25-02-2010, 05:46 PM
hi guys,
can i switch off somehow de AU in multicas, i have fix key anyway and is freezeng now.thx!
killerno
26-02-2010, 01:18 AM
Nobody can help me?What shall i do.Digi tv channels freezing now every 5 minutes, because of the AU.If i can't switch of can i use Mgcam for emu only, and Multicas for CS? thanks again
amazon
26-02-2010, 02:18 AM
Sure can switch off it .. check as below..
Plug-Ins -> OpenXCAS -> Camd Setup -> MultiCAS ->
-> Smartcard Interface -> CAS Control -> NAGRA VISION ->
-> Autoroll [ On to Off ] and then Press RED key to Save ...
easy~.. Good Luck~
killerno
26-02-2010, 10:54 PM
thanks for the answer amazon.I have an another problem with sly uk.Using Cccam in hop1 to watch the channels and everything working fine HD as well except the Movie HD channels freezing every 2 minutes.(Sly sports HD working well).Can improve it somehow?Better to use Mgcamd instead of Multicas?
Thx!
freshmaker
26-02-2010, 11:45 PM
use cccam 2.1.3
killerno
27-02-2010, 12:41 AM
hi! use cccam 2.1.3 as a clinet?DeformE cccam server is alright?So shall i use cccam 2.13 as a server and a client as well?
thx
there is a new version 162C-A01 available.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.