View Full Version : Loosing signal on HD channels
Blesi
19-02-2010, 07:20 PM
I have azbox premium with harddisk . Firmware 4466 and newest multicas v1.62B-A07 . I was loosing signals on HD channels on THOR 0,8w and now also on Astra 28,2 e . The FTA HD channels are ok . Only scrambled HD channels going . They all come up with good signal quality when scanned but as soon as I try watch then the signal goes and up comes the window with "no signal" . Signal is ok on my DVB skystar2 card in my PC ,same dish and lnb. Been trying to search for the problem as there must be some other having same problem but canīt find any thing . What can be wrong in my setup ??
Dig Deep
22-02-2010, 10:10 AM
Not a setup problem mate
Itīs a bug :001_07: Better toll back or wait for an upgrade.
Carp95
22-02-2010, 11:26 AM
Not a setup problem mate
Itīs a bug :001_07: Better toll back or wait for an upgrade.
What a nonsense those channels work fine here Thor is OK and Astra2 the same.
Working with 4487 on all boxes, m8 of mine same fw and no problems too
luis88
22-02-2010, 06:50 PM
It is a bug with 4466, you can scan and save and then lose signal. If you then go to transponder edit and change the pilot from either 0 t 1 or the opposite the signal is restore.Very odd.
Dig Deep
23-02-2010, 10:36 AM
What a nonsense those channels work fine here Thor is OK and Astra2 the same.
Working with 4487 on all boxes, m8 of mine same fw and no problems too
When it come to AZ and FW the proper way to answer is:
On FW XXXX they all work !
Everything else is nonsens as bugs come and go:cool:
Blesi
25-02-2010, 11:04 PM
Looks like the pilot changes from 0-1 when updating firmware and you have to go to each lost transponder and change the pilot to 0 . Sometimes you have to flickr back and forth. I donīt understand this pilot thing , have had many boxes and none have had thisstrange behaviour . Also many HD channels have bad picture quality , like a gray haze over the picture, many times much better picture quality on same SD channel . But German and Scandinavian HD channels have the best quality pictures so maybe itīsnot only the box but the upload quality .
I am having the same problem with no signal,could it be that Maz is acting up for I saved the channel list to my pc and after upgrading to 4487 I sent it back to box.
the illuminati
28-02-2010, 06:36 AM
keep it on a channel that gives you no signal for a few moments and you'll
get signal back then it will be back to normall
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.