PDA

View Full Version : ACC - AZBox Control Center - v.1.1


@telesat
21-02-2010, 04:51 PM
ACC - AZBox Control Center

v.1.1
Some minor and major bugs fixed.
Faster FTP transfer and bugs related with it - fixed.

added:
* Supprt for messages in cyrillic (Russian, Macedonian...) without installing localisation.
* Translation into other languages.
* Update od FW trough Internet: in Tools-1 section, FW, firts click on Update list and when you get FW list, click on the one you want to be installed in your AZ box.
Oniline FW update process: download, prepare, transfer in azbox and flashing process, beacause of that be patient i follow the messages.
* Loading and saving channel lists into AzBox - in section: Tools-2, Channel List
Everybody who has problem loading lists in AzBox and strange stufs like crazy mix after loading lists (besides that you have already erased unnecessary satelites.
this way you will get clear and clean list with that that you really want to have on your STB.
* Font installer - also in Tools-2
you can install/add system font and before that previewing how does font looks like - in small window on right.
* FAN - section Tools-2, Front panel
you can turn on/off FAN
* CAM Section, CCcam status - writing out name od the server added
* CAM Section, ECM info for MGCamd and MBox
* CAM Section, Edit/read MGcamd cfg files
* CAM Section, Edit/Read MBox cfg files
* CAM Section, list of currently available card with writing out names od providers for MGCamd
* CAM Section, list of currently available card with writing out names od providers for MBox

hxxp://rapidshare.com/files/353545518/ACC_v.1.1.rar


rgs, telesat
Smudger
21-02-2010, 06:09 PM
could someone upload Rapid share is being a pain at the moment.
@telesat
21-02-2010, 06:22 PM
Attach ACC to msg :

https://www.satpimps.co.uk/attachment.php?attachmentid=40432&d=1266772872

rgs,
telesat
Robertus78
21-02-2010, 06:23 PM
Telesat was faster ;-)

edit: removed link
happyhammer
24-02-2010, 06:21 PM
trying to use this via Putty tunnels.

What ports on the router do i need to direct to the azbox to do this. I can connect and telnet ok, the ftp connects but you can never change directory from the folder /*.* to list files. Hence the get status and remote features dont work either.
rtificial
25-02-2010, 08:40 AM
That can be quite complicated hammer.

Technically, it would be easiest to use Active FTP instead of passive, and use port 20 and 21 for the ftp connection.

For passive FTP, you will need to open a huge range of ports on your router
happyhammer
25-02-2010, 10:00 AM
That can be quite complicated hammer.

Technically, it would be easiest to use Active FTP instead of passive, and use port 20 and 21 for the ftp connection.

For passive FTP, you will need to open a huge range of ports on your router

I already have Passive unchecked in ACC. I also already set up ports 20 and 21 on the router to go to the azbox.

But it didn't work, hence my post.
rtificial
25-02-2010, 12:26 PM
Question is if the ftp server on the azbox is set to active, right? Not sure if this is supported.
happyhammer
25-02-2010, 02:04 PM
Question is if the ftp server on the azbox is set to active, right? Not sure if this is supported.

FTP server on AZBOX is not switched on . It's not needed when ACC is successfully used locally, so i don't see why it would be necessary in this instance.